Fresh PCB Concepts: Key Considerations for Reliability, Performance, and Compliance in PCBs
Elementary Mr. Watson: Navigating RF—A Glide Path Approach to Design Success
Designers Notebook: Layer Stackup Planning for RF Circuit Boards
RF and Wireless Design Means Fighting Interference, Loss
April 24, 2023 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 1 minute
Keysight EDA has been in the RF and microwave design industry for decades. We asked How-Siang Yap, product manager for Keysight EDA’s RF and microwave software tools, to share his thoughts on RF design tips and techniques, and how designing boards at RF speeds compares with designing PCBs at slower speeds. As he explains, much of RF design involves battling interference and loss.
How does designing PCBs for wireless communications differ from designing a traditional PCB?
The major differences in designing PCBs for wireless communications are:
- Layout of traces, vias, interconnects, and packaging must consider the electromagnetic behavior of these physical structures on wireless communication performance.
- Layout must be optimized for RF (radio frequency) sensitivity to prevent interference and noise coupling from non-wireless and digital sections by shielding, absorption, or isolation.
- Layout must consider impedance matching between components and to antennas for optimal power transfer and low noise performance. This means that trace ground reference, shape, widths, and interconnecting transitions are not arbitrary, and they must obey RF signal propagation and radiation geometries.
- Select material properties of PCB board and layer stackup arrangements to ensure minimal loss of precious RF wireless signals to optimize performance.
What sort of problems do designers face in the RF arena that they don’t see with typical PCB designs?
Based on these differences, we can see that RF PCB design is not just designing interconnecting traces to fit onto a board. We must also consider how RF signals are protected from interference from non-RF sections on the same board and propagated along RF transmission lines such as co-planar waveguides (CPW) or microstrips with careful shaping of transitions and bends to prevent signal reflection and insertion loss.
To read this entire article, which appeared in the April 2023 issue of Design007 Magazine, click here.
Share on:
Suggested Items
New Issue of Design007 Magazine: Are Your Data Packages Less Than Ideal?
05/09/2025 | I-Connect007 Editorial TeamWhy is it so difficult to create the ideal data package? Many of these simple errors can be alleviated by paying attention to detail—and knowing what issues to look out for. So, this month, our experts weigh in on the best practices for creating the ideal data package for your design.
RF PCB Design Tips and Tricks
05/08/2025 | Cherie Litson, EPTAC MIT CID/CID+There are many great books, videos, and information online about designing PCBs for RF circuits. A few of my favorite RF sources are Hans Rosenberg, Stephen Chavez, and Rick Hartley, but there are many more. These PCB design engineers have a very good perspective on what it takes to take an RF design from schematic concept to PCB layout.
Cadence Unveils Millennium M2000 Supercomputer with NVIDIA Blackwell Systems
05/08/2025 | Cadence Design SystemsAt its annual flagship user event, CadenceLIVE Silicon Valley 2025, Cadence announced a major expansion of its Cadence® Millennium™ Enterprise Platform with the introduction of the new Millennium M2000 Supercomputer featuring NVIDIA Blackwell systems, which delivers AI-accelerated simulation at unprecedented speed and scale across engineering and drug design workloads.
The Right Blend: Mixed Wireless Technologies
05/08/2025 | Kirsten Zima, Siemens EDAA common trend recently is to employ as many radios as possible on a single PCB. With the increase of wireless standards and the downscaling of PCB size, it can be difficult to know what the most critical design parameters are to focus on. In this article, we’ll discuss the most important considerations to make when designing with mixed wireless technologies, such as Bluetooth, GPS, and Wi-Fi, on a single PCB. These considerations include antennas, frequencies, FCC compliance, shielding, and layout with and without transition vias.
ZESTRON Announces New Reliability and Solutions Service for Risk Assessment & Mitigation of Electronic Assemblies
05/06/2025 | ZESTRONZESTRON, the leading global provider of high-precision cleaning products, services, and training solutions, is thrilled to introduce its new Reliability and Solutions (R&S) service.