Global PCB Connections: Understanding the General Fabrication Process—A Designer’s Hidden Advantage
Elementary, Mr. Watson: Why Your PCB Looks Like a Studio Apartment
The Shaughnessy Report: A Plan for Floor Planning
IPC's PCB Design for Manufacturability
December 28, 2023 | IPCEstimated reading time: 1 minute
Taught by an industry expert with more than 40 years of experience in the field, this 3-week online program, which starts Feb 20, 2024 | 12:00pm and runs through , is designed to provide the knowledge and skills necessary to reduce or eliminate design, documentation, and capability issues that often arise when completed PCB designs are sent to the fabricator for production.
Course Content
- DfM Course Introduction, Fabricator Capability and Materials
- Panelization, Stackups and Surface Finishes
- Conductive Features, Holes/Vias and Other Mechanical Features
- Masks and Inks, Impedance and Signal Loss, and Electrical Test
- FPC, Documentation and Specifications
- Participants receive the following helpful documents developed by Korf Consultancy LLC.
PCB Fabrication Design Rules
This editable document is designed to help PCB designers avoid many of the issues identified during the fabricator’s initial DFM review. It provides an extensive list of sample design rule parameters that designers can use to ensure that their designs are compatible with fabricator capabilities before the fabricator’s initial review. These globally representative design parameters are based on the most recent PCB design requirements.
Rigid PCB Fabrication Acceptance Specification
This editable document provides recommended qualification and performance specifications for all IPC-6012 requirements defined as AABUS (As Agreed Between User and Subscriber). Designers can use this document to inform fabricators of their company’s specific manufacturing, documentation, and quality requirements, inclusive of those that do not appear in IPC Standards.
Share on:
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Global PCB Connections: Understanding the General Fabrication Process—A Designer’s Hidden Advantage
08/14/2025 | Markus Voeltz -- Column: Global PCB ConnectionsDesigners don’t need to become fabricators, but understanding the basics of PCB fabrication can save you time, money, and frustration. The more you understand what’s happening on the shop floor, the better you’ll be able to prevent downstream issues. As you move into more advanced designs like HDI, flex circuits, stacked vias, and embedded components, this foundational knowledge becomes even more critical. Remember: the fabricator is your partner.
The Art and Science of PCB Floor Planning: A Comprehensive Guide
08/14/2025 | Cory Grunwald and Jeff Reinhold, Monsoon SolutionsPCB design is an intricate and crucial part of developing electronic products. One of the foundational stages of PCB design is floor planning, a phase where the placement of components and the flow of signals are meticulously mapped out. A good floor plan ensures that the PCB performs well, is easy to manufacture, and meets all mechanical and electrical requirements. We’ll explore the essential aspects of floor planning, from its objectives and process to the challenges that designers face.
EnSilica Establishes New EU Mixed-Signal Design Centre in Budapest, Hungary
08/12/2025 | EnSilicaThe facility strengthens EnSilica’s presence in the European Union and taps into Budapest’s deep technology ecosystem, which hosts numerous leading automotive and industrial multinationals. This expansion will increase the Group’s global headcount to around 210 employees.
Happy’s Tech Talk #41: Sustainability and Circularity for Electronics Manufacturing
08/13/2025 | Happy Holden -- Column: Happy’s Tech TalkI attended INEMI’s June 12 online seminar, “Sustainable Electronics Tech Topic Series: PCBs and Sustainability.” Dr. Maarten Cauwe of imec spoke on “Life Cycle Inventory (LCI) Models for Assessing and Improving the Environmental Impact of PCB Assemblies,” and Jack Herring of Jiva Materials Ltd. spoke on “Transforming Electronics with Recyclable PCB Technology.” This column will review information and provide analysis from both presentations.
Elementary, Mr. Watson: Why Your PCB Looks Like a Studio Apartment
08/13/2025 | John Watson -- Column: Elementary, Mr. WatsonIn November 2022, I wrote a column called "Is Your Bathroom in the Kitchen?" This piece related a bizarre real estate listing that emerged out of St. Louis that had architects scratching their heads and interior designers cringing. Nestled in the historic Central West End sat a 200-square-foot apartment that completely defied logic. It wasn't the size that raised eyebrows, it was the layout. Here's the kicker: While that's rare in real estate, it's shockingly common in PCB design.