Elementary, Mr. Watson: High Power: When Physics Becomes Real
The Shaughnessy Report: Watt About Power Integrity?
Global PCB Connections: Understanding Your Fabricator’s Capabilities (or Niche)
Building on DesignCon’s 30th Anniversary Momentum
February 4, 2025 | Marcy LaRont, I-Connect007Estimated reading time: 2 minutes
With three decades of technological advancements, DesignCon has established itself as a premier conference for electronics design. Susan Deffree, the group event coordinator, reflects on the event's rich history and the exciting developments for its 30th anniversary.
Marcy LaRont: Suzanne, tell me about the show's origin and how DesignCon has developed over the years. What's really exciting about this 30th year?
Suzanne Deffree: DesignCon started as a Hewlett Packard (HP) event focused on HP products and technologies and grew up through Hewlett Packard’s divisions and spin-offs. The HP group, which is now Keysight, contributed to a lot to DesignCon’s growth.
Originally, the show focused on interconnects, but it's grown to be everything that touches the chip on the board in any way. We've got semiconductors and microelectronics, we've got PCBs, and we've got interconnects—which are still very important. Test and measurement, of course, is also at that foundational level of every electronic device in our world—your iPhone, your refrigerator, your car, anything that's got electronics in it, starts at DesignCon.
LaRont: I just listened to the keynote speaker from NVIDIA, which was really interesting. What else did you plan for this year?
Deffree: We planned 15 conference tracks, our Chip Head Theater, and our daily keynotes. We've had panel discussions every afternoon and those were packed. We had one with over 200 people in it yesterday and that was amazing. We also had about 170 suppliers on the expo floor.
We also planned several events specifically to celebrate the 30th anniversary. We had a lounge on the expo floor where you could pick up an alumni ribbon to show off how long you've been affiliated with DesignCon. We also had a timeline on display showing the progress of 30 years of tech. It highlighted this chip or that testing technology. But then it also has bigger influences like the iPod or a space shuttle launch. Our tech is in those big events. Our tech made those advances possible. The engineers of DesignCon made all that possible.
We also did giveaways for the 30th anniversary, and had a fun scavenger hunt. We linked up with a few new partners; IEEE EMC had its Women In Engineering group on Thursday afternoon with three sessions, including a reception about career advancement. Everyone was invited; it wasn’t a women-only program.
LaRont: I attended some of the technical tracks today, and walked the show floor. It was very busy down there, and that’s great to see. What did you attendance numbers look like?
Deffree: I don't have official numbers, but I know we were up significantly in pre-registration and based on the floor attendance, it was a very good attendee year and a great experience, too.
LaRont: That's great. Congratulations on your 30th DesignCon event. Thank you for all you do.
Deffree: Marcy, it’s good to see you here. Thank you.
Share on:
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
The Right Approach: Electro-Tek—A Williams Family Legacy, Part 1
10/15/2025 | Steve Williams -- Column: The Right ApproachThere is no bronze bust in the lobby or portrait in the conference room of Electro-Tek's founder—my Dad, Charles “Chuck” Williams—so with the facility closing last year after 56 years, I feel it is time to tell the story. Chuck Williams founded Electro-Tek in 1968 in our basement, eventually moving into the second floor of an old 1913 building in downtown Milwaukee that is still standing (the first of three eventual facilities).
Taiwan Rejects U.S. Proposal for 50-50 Semiconductor Production Split
10/03/2025 | I-Connect007 Editorial TeamTaiwan stated on October 1 that it will not agree to a U.S. proposal to shift half of its semiconductor production to the United States, despite mounting pressure from Washington over tariffs and chip supply security, according to Reuters.
Jiva Leading the Charge Toward Sustainable Innovation
09/30/2025 | Marcy LaRont, PCB007 MagazineEnvironmental sustainability in business—product circularity—is a high priority these days. “Circularity,” the term meant to replace “recycling,” in its simplest definition, describes a full circle life for electronic products and all their elements. The result is re-use or a near-complete reintroduction of the base materials back into the supply chain, leaving very little left for waste. For what cannot be reused productively, the ultimate hope is to have better, less harmful means of disposal and/or materials that can seamlessly and harmlessly decompose and integrate back into the natural environment. That is where Jiva and Soluboard come in.
Curing and Verification in PCB Shadow Areas
09/17/2025 | Doug Katze, DymaxDesign engineers know a simple truth that often complicates electronics manufacturing: Light doesn’t go around corners. In densely populated PCBs, adhesives and coatings often fail to fully cure in shadowed regions created by tall ICs, connectors, relays, and tight housings.
Building Electronics Excellence in India
09/08/2025 | Nolan Johnson, SMT007 MagazineFor over two decades, Dave Bergman has helped steer the Global Electronics Association’s work in India, from a single training course to a thriving regional operation with deep government and industry ties. In this interview, Dave explains how the group went from partnering with IPCA to opening its own office in 2010, creating India’s first domestic electronics manufacturing standard, and securing funding for dozens of Indian companies to attend U.S. trade shows.