-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueInner Layer Precision & Yields
In this issue, we examine the critical nature of building precisions into your inner layers and assessing their pass/fail status as early as possible. Whether it’s using automation to cut down on handling issues, identifying defects earlier, or replacing an old line...
Engineering Economics
The real cost to manufacture a PCB encompasses everything that goes into making the product: the materials and other value-added supplies, machine and personnel costs, and most importantly, your quality. A hard look at real costs seems wholly appropriate.
Alternate Metallization Processes
Traditional electroless copper and electroless copper immersion gold have been primary PCB plating methods for decades. But alternative plating metals and processes have been introduced over the past few years as miniaturization and advanced packaging continue to develop.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
A Conversation (and Day) with Joe Fjelstad, Part 2
May 5, 2015 | Barry Matties, I-Connect007Estimated reading time: 5 minutes
Part 2: The Future of Electronics, the Role of Software and (gasp) Liberalism vs. Conservatism!
Joe and I continued our discussion with the subject of the future of what’s to come for the electronics industry, which, according to Fjelstad, has a lot to do with where we’ve just been in our quest for lead-free manufacturing. He also offers his view on the natural order of the evolution of personal political persuasions.
Barry Matties: Joe, what do you see as the future of electronics?
Joe Fjelstad: That's a bit of a loaded question. I can safely say I believe it will be different. As you know, I personally see a compelling case for eliminating solder from the manufacturing process because, at least to me, it makes too much sense, not just economically and environmentally, but from a reliability perspective as well, though I will probably be dead before it happens. (laughs) Presently, we are still stuck in that paradigm where hardware is an inconvenience that is not all that important; it’s the software stuff that is really important. It's all about service and the apps. Some phones are “free” at present, but I think there will be an awakening at some point.
Matties: There has been a shift in that as we see more software companies entering the hardware space.
Fjelstad: Understood, but the way that they're driving the cost on those things is to sell the software. They want to sell the apps. They're all about the high-margin items. It's always been there. Hardware is just an unfortunate middleman. There may be an occasion in the future where we start plugging apps into ports in our heads to access our brain and those devices will be hardware as well as software. I don't think that scenario is all that crazy.
Matties: I don't mind being lead-free (laughs).
Fjelstad: Actually, to that point, because you have a medium that you're plugged into, you don't need to worry about it. But as far as the future goes, I believe supercapacitor technology will be a big game changer in electronics for energy storage. The other things that hold interest for me are futurist things like the photonic transistors. When they arrive it will create another big game changer for processing—low energy and speed of light performance. Meanwhile, I like the being work done at GreenArrays where they are now producing chips with up to 144 cores, that is, 144 complete computers with ROM and RAM, that operate in zero wait mode and use very little energy.
Multicore processors appear to have been the brainchild of Chuck Moore who was also the inventor of Forth programming language, which I understand from those more knowledgeable than me on the topic, is very elegant. The language was used on some of the earliest microprocessor chips. The new multicore chips are very tiny, high-performing and energy conservative, and those are features that are going to be critical going forward. It is interesting where we are today. One doesn't need a gigahertz or a multi-gigahertz processor to word process. It's just not necessary, though it's probably very important for things like voice recognition, such as Dragon NaturallySpeaking. No doubt, high-performance processors are very helpful there, but I suspect that multicore could play a role as well.
It is actually quite stunning where voice recognition technology is today. I've been using that through several generations and it just keeps on getting better. It still makes mistakes and it doesn't understand everything, but then, I suppose, it arguably doesn’t understand anything. It is sensing sounds to create words and put them together contextually, based on what it has seen over the life of its operation; thus, it has a certain learning quality to it.
Matties: I'm really enjoying this part of my job where I'm talking to people and hearing their stories, like we're doing today. It's really interesting to listen to the people in our industry and hear different viewpoints, especially when they are so contrasting.
Fjelstad: Clearly, the differing viewpoints we have are very interesting. I love all my friends in this industry, but oftentimes, they're not on the same page with a lot of things. One may still hold a great deal of affection for others, but it gets to the point with some topics where you can't understand each other on certain topics, because both are talking over a chasm and the message does not get across. I always worry when I hear about somebody who says they're a young conservative. God, that’s frightening.
Matties: Is it much different than an older conservative?
Fjelstad: The thing is, to be young and conservative is, I believe, the antithesis of the goal of nature for youth. It's actually the opposite. You should be radical when you're young; conservatism is for later in life because most folks generally become more conservative with age. Be crazy and wild while you're young and then you will be brought back. Nature will bring you back to center. If you are conservative when young, you are likely to become ossified by middle age. I suppose I have a different way of looking at things. There's so many times in my life I should have been dead and yet I'm still here. Must be for some reason, but I don't know what that is.
Matties: You don’t tend to become radical later.
Fjelstad: Yeah, it’s tough to become more liberal with age. While somewhat on the topic and if I can touch the “third rail” lightly, I worry about the intertwining of religion and politics. The founders were deists who believed in God but who saw the importance of separation of church and state. Granted, the nation was predominantly Christian, but the warring between Catholics and Protestants seen in Europe was not lost on them. The country held the two apart fairly well until the 1950s and McCarthy’s hunt for godless communists. I have no problems with any religion at all, but I believe it's very important to keep it separated from the government and politics. It is a slippery slope towards division of the populace and creation of intolerance for those of divergent views or beliefs. We see it happening in Iraq; I would hate to see it happen here. That does not have much to do with technology does it? Now I think I actually need to get back on the rails. (laughs)
Coming Wednesday: Part 3: Fjelstad describes his entry into electronics manufacturing, via Vietnam, and a French restaurant, and how his understanding of history, especially war, has shaped his world view. Also discussed: India, and the positive example they are setting for the rest of the world.
Click Here if you missed Part 1 and Click here to advance to Part 3
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.