Electric Field Control of Magnetic Moment in Palladium
October 1, 2015 | University of TokyoEstimated reading time: 2 minutes
Researchers at the University of Tokyo and Central Research Institute of Electric Power Industry have successfully induced a magnetic moment in palladium (Pd), usually a non-magnetic material, and demonstrated the ability to reversibly control the strength of the magnet by applying an electric field. This research has demonstrated the possibility of electrically inducing magnetism in non-magnetic materials.
If the properties of a material could be electrically tuned after production, it would be possible to easily obtain the desired functions when needed, further increasing the range of materials that could be used in magnetic devices. In fields that employ magnetic materials, tuning of magnetic force and control of magnetization direction (together, these properties are termed the “magnetic moment”) has been demonstrated by applying a voltage to a capacitor containing a magnetic film as one electrode and charging and discharging charge carriers (electrons) from the electrode. It is expected that this method will dramatically reduce power consumption compared to conventional means of controlling magnetic moment (heating, magnetic field or electric current application).
Prior studies have reported that it is possible to erase the magnetic properties of a material by the application of an electric field. However, there are no reports of successfully inducing and cancelling magnetic properties in a non-magnetic material by the same method.
The research group of Associate Professor Daichi Chiba at the University of Tokyo Graduate School of Engineering and the Central Research Institute of Electric Power Industry has shown that the strength of a magnetic moment induced in palladium, a metal which is usually non-magnetic, is electrically controllable, and that application of a positive voltage induces a stronger magnetic moment than a negative voltage. The research group fabricated an ultra-thin cobalt/palladium structure in which a ferromagnetically ordered magnetic moment was induced in the top palladium layer by the ferromagnetic proximity effect. The magnetic moment in this Pd layer was reversibly controlled by applying a voltage.
“This offers a new avenue for making non-magnetic materials ferromagnetic,” says Associate Professor Chiba of this latest research. He continues, “If it becomes possible to easily and reversibly induce magnetic properties in a non-magnetic material by applying an electric voltage, we may be able to make use of many materials currently not used in the field of magnetic engineering and further increase the range of materials available for use in magnetic devices.”
This research was carried out in collaboration with Senior Research Scientist Shinpei Ono at the Central Research Institute of Electric Power Industry Materials Science Institute.
Suggested Items
iNEMI Packaging Tech Topic Webinar: Packaging Interconnect Material Technology Series
09/19/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) continues its Packaging Interconnect Material Technology Series with a webinar on Transient Liquid Phase (TLP) Bonding for High-Temperature Soldering Processes.
Fresh PCB Concepts: The Journey of a PCB—A Tale of Sustainability and Circularity
09/18/2024 | Team NCAB -- Column: Fresh PCB ConceptsImagine a bustling factory floor where hundreds of PCBs hum with potential, each one destined to be the brain of a new electronic device. From the sleek smartphone in your pocket to the intricate systems in electric vehicles, PCBs are the unsung heroes of our digital world. But have you ever wondered what happens to these tiny powerhouses when their work is done? The journey of a PCB doesn’t end when a device reaches the end of its life. In fact, that’s where the next chapter begins—a chapter that’s critical for our environment and our future.
Creative Materials, Unveils Economical Conductive Ink and High Dielectric Strength Ink for Advanced Electronic Applications
09/11/2024 | Creative Materials, Inc.Creative Materials Inc., an innovator of materials for the electronics industry, is pleased to announce the launch of two new high performance ink products:
Smartkem, Chip Foundation Partner on MicroLED Backlight Tech
09/10/2024 | PRNewswireSmartkem, a company that has the potential to power the next generation of displays using its disruptive organic thin-film transistors (OTFTs), announced that it has entered into a joint development agreement with Shanghai Chip Foundation Semiconductor Technology Co., Ltd., a manufacturer of semiconductor and integrated circuit devices, to co-develop a new generation of microLED-based backlight technology for Liquid Crystal Displays.
A Parametric Approach to the Environmental Impact of PCB Fabrication
09/09/2024 | Maarten Cauwe, imecSustainability for electronics is receiving more attention due to environmental concerns, regulatory obligations, and to ensure competitiveness in a growing market for sustainable products. To facilitate the discussion on the environmental impact of electronics, there is a strong need for data on energy use, carbon footprint, greenhouse gas (GHG) emissions, hazardous chemicals used during manufacturing, waste generation, etc.