-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueBox Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Selecting a Through-Hole Soldering System, Part 1
November 4, 2015 | Robert Voigt, DDM NovastarEstimated reading time: 1 minute
While through-hole assembly is much less commonly done than it was in the early days, and far less common than SMT assembly, it is still a viable and important technique that requires an understanding of the various soldering systems available. This column will outline the available methods and provide a brief overview of their strengths and weaknesses.
Methods of Through-hole Soldering
With the exception of selective soldering, the type of soldering technique you select will be largely dependent on anticipated board throughput. The simpler, less expensive techniques will only work for the lowest volume.
The five methods are:
1. Manual
2. Dip
3. Drag
4. Wave
5. Selective
Manual
Manual soldering is done simply by holding a soldering iron in one hand and manually feeding solder from the other hand to the through-hole component. Solder usually incorporates a flux core, so pre-fluxing is necessary. Simple irons don’t provide much control on temperature, while others can provide variable temperature control to prevent under- and over-heating components. This method is very labor intensive, and thus is used only for very low volumes. Quality is dependent on the operator’s training, experience and skill. Training courses and standards are available for personnel to improve their quality level.
Pros: Very inexpensive; prices range from $50 for a basic iron to $2,000 for a high tech version with temperature controls
Cons: Labor intensive; quality dependent solely on operator skill
Dip
Dip soldering is done by holding a pre-fluxed board in a frame and lowering it into a static solder pot then removing it to cool. Dip soldering does not usually involve a pre-heat phase, except by suspending the board over the hot solder for some pre-determined time to activate the flux. The dip technique is an older method that was introduced as a way to solder the entire board at once, rather than one component at a time. However, it can be messy and potentially dangerous to the staff because of their proximity to the hot solder pot and from flux fumes in the ambient air.
Pros: Low cost per solder joint; systems range from $1,000 to $5,000 for a non-automated system; relatively fast
Cons: Old technology, low volume; messy and potentially hazardous; not terribly precise, so some bridging may occur between joints requiring inspection and rework
Editor's Note: This article originally appeared in the November 2015 issue of SMT Magazine.
Suggested Items
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.