Facing the Future: The Role of 5G and Beyond in Shaping PCB Demand
It’s Only Common Sense: Stop Pitching, Start Listening
Trouble in Your Tank: Causes of Plating Voids, Pre-electroless Copper
Eltek Purchased the New Orbotech Diamond 8 Solder Mask System
January 26, 2016 | OrbotechEstimated reading time: 2 minutes
ORBOTECH LTD announced today that Eltek, a Nistec company and long-time Orbotech customer, has been successfully using the new Orbotech Diamond 8 Direct Imaging (DI) system for solder mask at its production facility in Petach Tikvah, Israel. Eltek specializes in the production of flex-rigid boards, complex rigids and sequential laminated Printed Circuit Boards.
Orbotech Diamond 8, incorporating the unique SolderFast TechnologyTM, enhances Eltek’s high standard of production quality by exposing any conventional solder resist at high speed on even the most complex designs. The Orbotech Diamond 8 system will enable to efficiently manufacture the newest products thanks to its superior solder mask imaging accuracy and fast throughput.
“Orbotech’s Diamond is a significant technological leap forward in PCB manufacturing,” stated Roberto Tulman, Deputy CEO and CTO at Eltek. “Solder mask imaging is one of the main challenges that PCB manufacturers face today. Orbotech has given us a way to overcome this challenge remarkably well with a robust system that runs smoothly and delivers consistent, high quality results.”
“Eltek and Orbotech have a strong partnership going back many years”, said Mr. Hadar Himmelman, President of Orbotech West. “In fact, Eltek was the first customer to deploy our new Orbotech Diamond 8 DI system for solder mask. We are looking forward to continue supporting Eltek’s needs with best-inclass solutions.”
About Orbotech Diamond 8
Orbotech Diamond 8 is an extremely fast, accurate solution for high-volume solder mask DI. Powered by Orbotech SolderFast Technology, Orbotech Diamond 8 is especially suited for designs with high complexity. Building on vast field-proven experience in patterning, the Orbotech Diamond 8 improves throughput, yield and productivity while decreasing total cost of ownership (TCO).
Orbotech SolderFast Technology employs a controlled wide UV spectrum to ensure fast throughput and high quality on a variety of solder resists. Unique one-pass exposure enables uniform solder mask imaging over the entire panel. Orbotech Diamond 8, with its sophisticated optical mechanism, including a patented light source with high energy illumination, enables high DOF (Depth-of-Focus) for consistent, precise imaging quality thus overcoming the most challenging surface topography variations as well as any distortion or abnormality. The system also offers advanced scaling modes for high precision registration, further improving throughput. Orbotech Diamond 8 delivers the most advanced image quality with no need to deploy an autofocus mechanism.
About Eltek
Eltek is Israel's leading manufacturer of printed circuit boards, the core circuitry of most electronic devices. It specializes in the complex high-end of PCB manufacturing, i.e., HDI, multilayered and flexrigid boards. Eltek's technologically advanced circuitry solutions are used in today's increasingly sophisticated and compact electronic products. For more information, visit Eltek's web site at www.nisteceltek.com
About Orbotech Ltd.
Orbotech Ltd. is a global innovator of enabling technologies used in the manufacture of the world’s most sophisticated consumer and industrial products throughout the electronics and adjacent industries. The Company is a leading provider of yield enhancement and production solutions for electronics reading, writing and connecting, used by manufacturers of printed circuit boards, flat panel displays, advanced packaging, micro-electro-mechanical systems and other electronic components. Virtually every electronic device is produced using Orbotech technology. For more information, visit www.orbotech.com.
Share on:
Suggested Items
Indium’s Karthik Vijay to Present on Dual Alloy Solder Paste Systems at SMTA’s Electronics in Harsh Environments Conference
05/06/2025 | Indium CorporationIndium Corporation Technical Manager, Europe, Africa, and the Middle East Karthik Vijay will deliver a technical presentation on dual alloy solder paste systems at SMTA’s Electronics in Harsh Environments Conference, May 20-22 in Amsterdam, Netherlands.
SolderKing Achieves the Prestigious King’s Award for Enterprise in International Trade
05/06/2025 | SolderKingSolderKing Assembly Materials Ltd, a leading British manufacturer of high-performance soldering materials and consumables, has been honoured with a King’s Award for Enterprise, one of the UK’s most respected business honours.
Knocking Down the Bone Pile: Gold Mitigation for Class 2 Electronics
05/07/2025 | Nash Bell -- Column: Knocking Down the Bone PileIn electronic assemblies, the integrity of connections between components is paramount for ensuring reliability and performance. Gold embrittlement and dissolution are two critical phenomena that can compromise this integrity. Gold embrittlement occurs when gold diffuses into solder joints or alloys, resulting in mechanical brittleness and an increased susceptibility to cracking. Conversely, gold dissolution involves the melting away of gold into solder or metal matrices, potentially altering the electrical and mechanical properties of the joint.
'Chill Out' with TopLine’s President Martin Hart to Discuss Cold Electronics at SPWG 2025
05/02/2025 | TopLineBraided Solder Columns can withstand the rigors of deep space cold and cryogenic environments, and represent a robust new solution to challenges facing next generation large packages in electronics assembly.
BEST Inc. Reports Record Demand for EZReball BGA Reballing Process
05/01/2025 | BEST Inc.BEST Inc., a leader in electronic component services, is pleased to announce they are experiencing record demand for their EZReball™ BGA reballing process which greatly simplifies the reballing of ball grid array (BGA) and chip scale package (CSP) devices.