-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueBox Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Rework Site Printing using Mini Stencils—Plastic Adhesive vs. Metal
February 15, 2016 | Bob Wettermann, BEST Inc.Estimated reading time: 3 minutes
In order to duplicate the original manufacturing process as closely as possible, the rework of complex devices can be accomplished by paste printing solder paste in a select location. Ever since the advent of widespread usage of surface mount devices such as fine pitch QFNs or BGAs, this practice has continued to grow. Today’s pitches are commonly 0.5–0.4 mm with packages of tiny outline sizes 510 mm square, making the rework of such devices a challenge. Spacing to neighboring components continues to be compressed so the rework techniques are getting more challenging from a practical point of view.
The process of printing consistently has given rise to a more modern technique for printing solder paste in a given location for fine pitch devices without there having to be poor yields or highly skilled technicians to perform the work. A soon-to-be-reported study compares the older miniature metal stencil printing process to the more modern plastic film with adhesive approach. This report quantifies the differences in performance for the first time.
The miniature metal stencil, while matching the original SMT printing stencil, has several shortcomings with respect to the rework printing process. This technique, while perfectly capable for most SMT boards, has fallen out as preferred and capable method for several reasons. With the tighter spacing between components these “mini” metal stencils are too large for modern board layouts as there needs to be an oversized area compared to the print area for the holding and supporting of the stencil. In addition, the finer pitches and pad sizes makes it difficult, even for the most skilled rework technicians, to perfectly print in a single pass the correct volume of solder paste onto the PCB. With ever-thinning stencils due to lower paste volume requirements, these metal stencils are easily bent or damaged during cleaning or squeegeeing, meaning that it is difficult to retain a co-planarity with the PCB. The lack of coplanarity causes solder paste to squirt out from underneath the stencil. These problems make the miniature metal stencils less suitable today for the deposition of solder paste during rework.
Plastic film stencils have taken over where the mini metal stencils have left off. They offer up some distinct advantages based on the user complaints over their mini metal stencil counterparts. Their repositionable adhesive backing allows the user to move the stencil around creating micro-fine alignments on the PCB after the macro adjustments have been made. In addition, the adhesive helps ensure co-planarity with the PCB even if the board is slightly warped. The sticky backing also allows the user to use multiple swipes with the squeegee, thus ensuring the apertures are “filled” completely. The flexible nature of the stencil allows for the stencil to be used in very tight areas, which need to be printed prior to rework. These stencil designs even allow for “flaps” to be built into the stencil design and prevent solder paste from being pushed outside of the rework area requiring further clean-up. For these and other reasons the adhesive-backed plastic film stencil is now the preferred rework stencil.
In a recent study, the results of which will be published at the APEX conference in March of 2016, the printing consistency between these two types of rework paste printing stencils will be revealed. In the meantime, select data from the study as well as the results of that study are included in this discussion.
In this study, a solder paste inspection measuring system measured the solder paste volume and solder paste “brick” height at each of the pad locations. After initial calibration, an ASC AV862 offline semi-automated measuring system was utilized to take the measurements. This system used Gerber data as input information in order to find the location of each of the solder pads. After this set up the camera scans each of the locations that it recognizes as having solder paste and measures the height and volume amongst seven parameters per pad location. These results were then tabulated, graphed and analyzed.
Editor's Note: This article originally appeared in the February 2016 issue of SMT Magazine.
Suggested Items
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.