-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Zuken Raises The Bar for ECAD/MCAD and Multi-user Efficiencies with CR-8000
June 8, 2016 | ZukenEstimated reading time: 2 minutes
Engineers facing extremely tight design cycles will benefit from powerful new multi-user functionality in Zuken’s CR-8000. Concurrent PCB design reduces design time, meaning quicker time-to-market. In addition, a raft of native 3D design enhancements offer more efficient ECAD/MCAD task management and design re-use, plus functionality enabling early validation to reduce iterations and improve design quality.
Zuken’s CR-8000 is the industry’s only 3D product-centric design solution with architecture design, concurrent 3D multi-board support, and chip/package/board co-design. CR-8000 2016, the latest update, is available now.
Concurrent multi-area PCB design
Teams can work on the same design area and at exactly the same time with concurrent multi-area PCB design. Designs can be modified simultaneously, reducing the overall design time and making best use of globally-dispersed teams. Each engineer can control their own viewpoint, and has continual and instantaneous visibility of the design and any remaining unconnected nets.
Improved part swap capability
Design effort is dramatically reduced with improved part swap capability. Superseded or highlighted parts can be viewed directly within the circuit data, and changed collectively. This avoids time-consuming manual checks for part swaps and enables designers to start at any point, swapping out parts as the design progresses without being concerned about missing an instance of a superseded part.
3D ECAD/MCAD efficiencies
True 3D STEP models are now defined within the library at the component level. Once that component is selected the 3D model will automatically become part of the PCB design. Origin alignment is managed, ensuring a common reference point between the ECAD and MCAD libraries and alignment of the 3D shape to the component footprint. An accurate 3D component model for output to MCAD is supported, with export of whole or subset designs.
With rigid-flex product visualization and design validation checks, the bend of the flex board can be modeled and collisions viewed to check design issues, with the product modeled to final state condition. This avoids design re-work and iterations between mechanical and electrical design.
Maximize re-use with modular design
Designers have more power to utilize known-good circuits, with new search and re-use capabilities for modular block selection. Module attributes can be added to the block for characterization so faster and more efficient selection can be realized. Building on existing constraint re-use functionality, constraint arbitration allows users to view a section of the block and easily see conflicting constraints, as well as define which information to preserve within a design by constraint or object.
For more info visit Zuken online at: zuken.com/cr-8000 or check out the video below.
RELATED VIDEO
Suggested Items
KIC’s Miles Moreau to Present Profiling Basics and Best Practices at SMTA Wisconsin Chapter PCBA Profile Workshop
01/25/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, announces that Miles Moreau, General Manager, will be a featured speaker at the SMTA Wisconsin Chapter In-Person PCBA Profile Workshop.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.
Standard Of Excellence: The Products of the Future
09/19/2023 | Anaya Vardya -- Column: Standard of ExcellenceIn my last column, I discussed cutting-edge innovations in printed circuit board technology, focusing on innovative trends in ultra HDI, embedded passives and components, green PCBs, and advanced substrate materials. This month, I’m following up with the products these new PCB technologies are destined for. Why do we need all these new technologies?
Experience ViTrox's State-of-the-Art Offerings at SMTA Guadalajara 2023 Presented by Sales Channel Partner—SMTo Engineering
09/18/2023 | ViTroxViTrox, which aims to be the world’s most trusted technology company, is excited to announce that our trusted Sales Channel Partner (SCP) in Mexico, SMTo Engineering, S.A. de C.V., will be participating in SMTA Guadalajara Expo & Tech Forum. They will be exhibiting in Booth #911 from the 25th to the 26th of October 2023, at the Expo Guadalajara in Jalisco, Mexico.
Intel Unveils Industry-Leading Glass Substrates to Meet Demand for More Powerful Compute
09/18/2023 | IntelIntel announced one of the industry’s first glass substrates for next-generation advanced packaging, planned for the latter part of this decade.