-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Taylor Guitars Protected with Analog, RF Circuitry
July 13, 2016 | Andy Shaughnessy, PCBDesign007Estimated reading time: 5 minutes
For over 30 years, Taylor Guitars has been building some of the best acoustic guitars around. From their entry-level models through their high-end custom models that will set you back five figures, one thing is certain: These are fine musical instruments.
Taylor, based on El Cajon, California, knows that their customers want to protect their investment. So they developed TaylorSense, a device that fits inside your guitar and signals an app on your phone when the guitar is too hot or cold, or too dry.
Trenton Blizzard is an electrical engineer on the team that developed TaylorSense. During the NAMM Show, Trenton spoke with me, along with Editors Dick Crowe and Dan Feinberg, about this new device, and what it’s like being an electrical engineer for a “woodworking shop.”
Andy Shaughnessy: I’m speaking with Trenton Blizzard from Taylor Guitars. Trenton, I understand that you are the electrical engineer who helped design the new TaylorSense.
Trenton Blizzard: Yes, I am part of the team who is developing the TaylorSense battery box.
Shaughnessy: Tell us about the TaylorSense and the process behind designing that.
Blizzard: TaylorSense will allow Taylor owners to monitor the temperature, relative humidity, battery life and impacts of their guitars. What's really cool is the device records this data, and then uploads it to your phone once you connect to it using the Taylor APP. The Taylor APP sends you alerts if your guitars conditions are undesirable. Let’s say you forgot your guitar in your car and it's hot outside and super dry, as long as you are within Bluetooth LE range you will get an alert that lets you know your guitar is at risk of getting too hot and drying out.
TaylorSense is a very cool tool that not only helps protect guitars, but also helps educate guitar players regarding the environmental conditions surrounding their instruments. This is not only important for acoustic guitars, but for all “hygroscopic” (water absorbing) investments such as pianos, acoustic basses, violins, wood flooring, as well solid wood furniture.
It’s fairly common to see a guitar set-up misdiagnosed as a “bad neck angle” when in reality the guitar is either too dry or too wet. Again, the value of the environmental information that TaylorSense can present to a player can’t be understated.
One of the biggest challenges in bringing all of this technical information to guitar players is keeping it practical in everyday use. Early on we defined a few guidelines before getting started. First, the device must be simple to use. Second, it must communicate data clearly. Third, the information must be applicable to real world conditions. Fourth, the design must not degrade the quality of the guitars amplified tone.
Shaughnessy: How did you get started on this? How did you settle on the design?
Blizzard: Since I’m involved in all electronic development projects at Taylor, I’ve been involved since the beginning of development. As far as “settle” goes, we looked at the most common problems of acoustic guitar care: Temperature, humidity and damage due to impacts and drops. There are many other features we could have included in TaylorSense, but in our goal to keep it simple we decided to only add a battery life indicator.
Shaughnessy: What's your background?
Blizzard: My background is in analog and mixed signal design. I’ve been designing all of the electronics at Taylor since 2003. The TaylorSense design is almost all 100% digital. One of my responsibilities is to help ensure the digital circuits don’t corrupt our analog signal lines. My secondary responsibilities are to ensure that contract manufacturing operates smoothly.
Dick Crowe: Where is Bluestream located?
Blizzard: Bluestream is located in Boston. Robert Bean, Michael Audi, and Michael Gordon are the three that are heading up the hardware and framework side of the design.
Shaughnessy: So this is like a multi-pronged team: You've got to develop the app, develop the hardware, the circuit board and so on.
Blizzard: We're always pushing ourselves beyond our comfort zones. We play guitars, we build guitars, we love wood, and everybody at the factory is very comfortable with that. But, now all of a sudden we say, “We need an app developer.” Sonoma Wire Works is doing the app work for us. The Taylor team is headed up by Tim O’Brien, Scott Reinhardt, Patrick Healy and I.
Shaughnessy: You're a woodworking company at heart, but now you're dealing with RF issues.
Blizzard: Thankfully I’m no stranger to dealing with radio frequency interference issues. Many of our designs use switching power supplies so I have spent plenty of hours at local RF test labs. However, for this design, Bluestream is handling the FCC certification and Bluetooth SIG compliance.
Dan Feinberg: Is the output on this digital or analog?
Blizzard: The guitar’s preamplifier output signal is 100% analog. Only the data is digital, via Bluetooth LE.
Feinberg: In the cases where some people prefer analog, can you do that?
Blizzard: Preserving the analog signal path was one of our original requirements. The guitar signal is purely analog.
Feinberg: So, do you have a digital/analog converter?
Blizzard: Absolutely not. It’s very important to us that we preserve the amplified sound of the guitars. With TaylorSense your guitar tone is 100% analog. No audio is processed digitally.
Feinberg: And everybody buys that? I mean, I believe you [laughs].
Blizzard: TaylorSense users can rest easy knowing their guitar tone is 100% analog. I verified it myself.
Feinberg: Because analog is a religion to some people. It isn't to me, but it is to some people.
Blizzard: Yes, we believe that as well. The analog preamplifier signals are not being digitized in any way.
Crowe: I would be proud of it; it’s such a nice tool.
Shaughnessy: Is there anything else you want to add, Trenton?
Blizzard: This whole design has been a huge learning curve for us, but like all things at Taylor, we're not afraid to take on new challenges or ideas. Doing this type of work you get beat down a lot, but it’s what you end up with in the end that makes it worth the effort. It’s also nice working with such a great team. I encourage you to visit Taylorsense.com to find out more.
Shaughnessy: Thanks, Trenton, I appreciate it.
Blizzard: Thanks, guys.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Ventec Discusses New Pro-bond Family of Advanced Products
05/01/2024 | Real Time with...IPC APEX EXPOChris Hanson, Ventec's Global Head of IMS Technology, outlines the launch of four pro-bond formulas that deliver an outstanding combination of low dissipation factor (Df) with a dielectric constant (Dk) range to maximize the design window for critical PCB parameters. As Chris points out, Pro-bond is designed for low-loss, high-speed applications, while thermal-bond dissipates heat from a component through the board to a heat sink.
IPC's Vision for Empowering PCB Design Engineers
04/30/2024 | Robert Erickson, IPCAs architects of innovation, printed circuit board designers are tasked with translating increasingly complex concepts into tangible designs that power our modern world. IPC provides the necessary community, standards framework, and education to prepare these pioneers as they explore the boundaries of what’s possible, equipping engineers with the knowledge, skills, and resources required to thrive in an increasingly dynamic field.
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.