-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Building Reliability into the PCB, Part 1
July 20, 2016 | Michael Carano, RBP Chemical TechnologyEstimated reading time: 1 minute
Introduction
Sometimes there is confusion among PCB engineers and quality managers as to what constitutes reliability. Some may say that reliability refers to avoiding PTH failures such as corner cracks or interconnect defects. Then there are those who subscribe to a wider range of failure criteria to determine whether or not the final product is reliable for long-term service. Regardless, the term “reliability” can be defined as:
“The probability that a functioning product at time zero will function in the desired service environment for a specified amount of time.”
With respect to printed circuit boards, the biggest concerns involve thermally driven failures. Thermally driven failures result in PTH defects including:
- Innerlayer separation (ICD)
- Foil cracks
- Barrel cracks
- Corner cracks
When a printed wiring board or assembly is under a thermal load (soldering, thermal cycling, etc.) the PTH is stressed in the z-axis direction. This stress is caused (due to the thermal excursion) by the difference in CTE (coefficient of thermal expansion) of the resin system (used for the printed board) and the PTH. The resin is prevented from expanding in the x/y planes by glass reinforcement of resin material. Due to this restraining in the x-y directions, resin is not restrained sufficiently in the z-axis direction, unfortunately. The result of this is that the resin expansion will occur at a much greater rate in the z-axis direction. The plated through-hole barrel is clearly stressed under these conditions. As this is occurring, the plated copper-to-inner layer connections experience severe tension. If the tension is severe enough, the copper-to-innerlayer connection can separate leading to ICD (interconnect defect). In addition, if the copper-to-innerlayer connection is sufficiently robust and does not separate, much of the stress and strain will be redistributed through the barrel of the PTH, leading to barrel cracking.
To read this entire column, which appeared in the July 2016 issue of The PCB Magazine, click here.
Suggested Items
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?