ICD Adds Termination Planner to Stackup Software
November 2, 2016 | ICDEstimated reading time: 1 minute
In-Circuit Design Pty Ltd (ICD), Australia, developer of the iCD Stackup and PDN Planner software, has released a new Termination Planner feature for its Stackup software.
The key pillars of high-speed design stability are stackup impedance, PDN impedance, and matched impedance. ICD currently has the first two issues covered with the Stackup and PDN Planner software. And now, the Termination Planner feature has also been introduced to complement the existing software.
“For perfect transfer of energy and to benefit from the highest possible bandwidth, the impedance of the driver must match the impedance of the transmission line and be constant along its entire length,” said CEO Barry Olney. “Unfortunately, using mainstream PCB layout software, one really has no idea what the driver impedance is, let alone the capability to match the driver to the unknown impedance of the transmission line.”
The ICD Termination Planner addresses this issue. Firstly, the attributes required to determine the source impedance of the driver, are extracted from an IBIS model IV curves. Then the required series termination resistance is calculated, based on a distributed system, to match the transmission line for the selected layer in the iCD Stackup Planner. If the IBIS model is not available (or produces an error) the user may use Generic models to calculate an approximate series termination. Generic models include: typical DDRx, Display Port, ECL, HDMI, LVCMOS and LVTTL gates, Mini-LVDS, NAND Flash, PCI, SDRAM, HSTL and SSTL models.
The number of loads on the transmission line also has an affect on the required value of series termination; as the IC input inductance and capacitance tend to roll-off the signal rise time. This can be adjusted from 1 – 6 loads and automatically compensated for in the calculation.
This new feature will be delivered to current ICD support customers as part of an interim upgrade and will be also made available as part of a new Stackup Planner acquisition.
A quick demonstration of the new ICD Termination Planner can be viewed here.
About In-Circuit Design Pty Ltd
In-Circuit Design Pty Ltd, based in Australia, developer of the ICD Stackup and PDN Planner software, is a PCB design service bureau and specialist in board level simulation. For further information or to download a free evaluation of the software, please visit www.icd.com.au
Suggested Items
Variosystems Strengthens Global Engineering Expertise
01/22/2025 | Variosystems AGVariosystems, the globally operating system provider for high-quality electronic solutions, reaches another milestone moment in the company's development. In opening of the global Engineering Service Center in Colombo, Sri Lanka, the company is expanding its engineering expertise to meet the demand for advanced services such as obsolescence management, electronics design and test development.
Cadence to Acquire Secure-IC, a Leader in Embedded Security IP
01/22/2025 | Cadence Design SystemsCadence announced it has entered into a definitive agreement to acquire Secure-IC, a leading embedded security IP platform provider.
Elementary Mr. Watson: The Road Ahead—Advances in PCB Design Technology
01/23/2025 | John Watson -- Column: Elementary, Mr. WatsonThis year introduces a new generational group, likely to be dubbed Generation Beta, since Generation Alpha was born between 2010 and 2024 and is considered the first generation born in the 21st century. Generation Alpha grew up in a world dominated by smartphones, artificial intelligence, and rapid technological advancements. It is anticipated that Generation Beta will live to see the 22nd century.
Course Review: IPC’s New Semiconductor Course Provides a Thorough Layman’s View
01/22/2025 | Nyron Rouse, IPCTaking the course, A Technical Overview of the Semiconductor CHIP Industry by Cheah Soo Lan wasn’t just a professional box to check for me; it was an opportunity to understand the technical backbone of a field that directly influences the work I do at IPC. While I’m not immersed in the technical aspects of semiconductors day to day, learning about this landscape allows me to better align our funding pursuits with the strategic needs of the industry.
An Inspiring Journey From Animation to PCB Design
01/20/2025 | Marcy LaRont, I-Connect007I recently spoke with Melissa Martinez, a PCB design student in John Watson’s class at Palomar College. In this interview, Melissa shares her inspiring journey from the world of animation to the realm of printed circuit board design. Introduced to the field by her father, an engineer at Northrop Grumman, she discovered her passion for PCB design through John’s curriculum at Palomar. Her story highlights the importance of mentorship and education in attracting new talent to the industry, encouraging young individuals to explore opportunities they may not yet know exist.