-
-
News
News Highlights
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueAll About That Route
Most designers favor manual routing, but today's interactive autorouters may be changing designers' minds by allowing users more direct control. In this issue, our expert contributors discuss a variety of manual and autorouting strategies.
Creating the Ideal Data Package
Why is it so difficult to create the ideal data package? Many of these simple errors can be alleviated by paying attention to detail—and knowing what issues to look out for. So, this month, our experts weigh in on the best practices for creating the ideal design data package for your design.
Designing Through the Noise
Our experts discuss the constantly evolving world of RF design, including the many tradeoffs, material considerations, and design tips and techniques that designers and design engineers need to know to succeed in this high-frequency realm.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
Ventec’s Martin Cotton to Showcase Ultra-Low Dk PCB Materials for High-Speed Low-Loss Applications at DesignCon 2017
January 10, 2017 | Ventec International GroupEstimated reading time: 1 minute

Ventec International, a world leader in the production of polyimide & high reliability epoxy laminates and prepregs, is participating at the 2017 DesignCon show in Santa Clara, California, USA from 31st January to 2nd February as both an exhibitor on booth #118 and technical presenter. The presentation will unveil the industry's most advanced ultra-low Dk PCB materials for high-speed low-loss applications.
Ventec will be participating at DesignCon 2017, the premier conference for chip, board, and systems design engineers, on booth #118 and has specifically chosen the event as the ideal platform to unveil the industry's latest advances in PCB materials for high-speed low-loss applications. Ventec's Martin Cotton (Director - OEM Technology Marketing) and Bill Wang (Technical Director) will be presenting their paper titled "Ultra-Low Dk PCB Materials for High-Speed Low-Loss Applications" in Ballroom F on Wednesday, 1st February at 8:00am.
The technical presentation will demonstrate how lower losses and lower system power requirements are realized by using an ultra-low Dk material with Dk values between 2.3 and 2.8.
"By lowering the material Dk to ultra-low levels using FR4 processes, the delicate balance of performance and cost is achieved", said Martin Cotton. "Higher layer counts on backplanes, daughter cards and hand-held's are achieved in a smaller footprint by having smaller layer to layer separation without sacrificing trace width. Having potentially wider traces produces lower resistance in the signal path" he continues. "Combining ultra-low Dk with a low Df of 0.002 to 0.004, produces an alternative to ever smaller traces and higher power requirements."
About Ventec International
With volume manufacturing facilities and HQ in Suzhou China, Ventec International specializes in advanced copper clad glass reinforced and metal backed substrates for the PCB industry. With distribution locations and quick-turn CCL manufacturing sites in both the US and Europe, Ventec International is a premier supplier to the Global PCB industry. For more information, click here.
Suggested Items
The Evolution of Picosecond Laser Drilling
06/19/2025 | Marcy LaRont, PCB007 MagazineIs it hard to imagine a single laser pulse reduced not only from nanoseconds to picoseconds in its pulse duration, but even to femtoseconds? Well, buckle up because it seems we are there. In this interview, Dr. Stefan Rung, technical director of laser machines at Schmoll Maschinen GmbH, traces the technology trajectory of the laser drill from the CO2 laser to cutting-edge picosecond and hybrid laser drilling systems, highlighting the benefits and limitations of each method, and demonstrating how laser innovations are shaping the future of PCB fabrication.
Day 2: More Cutting-edge Insights at the EIPC Summer Conference
06/18/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) summer conference took place this year in Edinburgh, Scotland, June 3-4. This is the third of three articles on the conference. The other two cover Day 1’s sessions and the opening keynote speech. Below is a recap of the second day’s sessions.
Day 1: Cutting Edge Insights at the EIPC Summer Conference
06/17/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) Summer Conference took place this year in Edinburgh, Scotland, June 3-4. This is the second of three articles on the conference. The other two cover the keynote speeches and Day 2 of the technical conference. Below is a recap of the first day’s sessions.
Preventing Surface Prep Defects and Ensuring Reliability
06/10/2025 | Marcy LaRont, PCB007 MagazineIn printed circuit board (PCB) fabrication, surface preparation is a critical process that ensures strong adhesion, reliable plating, and long-term product performance. Without proper surface treatment, manufacturers may encounter defects such as delamination, poor solder mask adhesion, and plating failures. This article examines key surface preparation techniques, common defects resulting from improper processes, and real-world case studies that illustrate best practices.
RF PCB Design Tips and Tricks
05/08/2025 | Cherie Litson, EPTAC MIT CID/CID+There are many great books, videos, and information online about designing PCBs for RF circuits. A few of my favorite RF sources are Hans Rosenberg, Stephen Chavez, and Rick Hartley, but there are many more. These PCB design engineers have a very good perspective on what it takes to take an RF design from schematic concept to PCB layout.