Elementary, Mr. Watson: The Design Matrix: Revealing the Hidden Truths of Reality
Connect the Dots: Designing for the Future of Manufacturing Reality—Surface Finish
The Pulse: Caught in the Crosshatch—A Cautionary Tale of Detective Work
Whose Fault is it When the Board Fails?
June 7, 2017 | Andy Shaughnessy, PCBDesign007Estimated reading time: 1 minute
In an upcoming issue of The PCB Design Magazine, we will discuss a question that you've undoubtedly faced in your job: Whose fault is it when the board fails?
Of course, everyone likes to blame the PCB designer. But think about it. Is the board shop at fault, or perhaps the EMS provider? Is it the customer's fault? Or does the designer bear some of the blame after all? Take this quick survey and let your voice be heard!
To take this quick survey, click here.
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
The Marketing Minute: If Your Marketing Budget Gets Cut in Half, Then What?
05/13/2026 | Brittany Martin -- Column: The Marketing MinuteHypothetically, let’s say your marketing budget gets cut in half tomorrow. (I’m stressed just thinking about it!) But here’s the real question: Would your actual marketing strategy change, or just the amount of money behind it? Because those are not the same thing. Markets go up and down. Budgets can tighten. If your entire marketing approach depends on the biggest, flashiest, most expensive options available, that’s not really a strategy. It’s just spending. A strong marketing strategy should remain consistent regardless of spending levels.
It’s Only Common Sense: Complexity Is the Enemy of Profit
05/11/2026 | Dan Beaulieu -- Column: It's Only Common SenseComplexity is expensive, but it doesn’t look that way at first. In fact, it often disguises itself as sophistication, flexibility, or customer responsiveness. But peel back the layers, and you’ll find bloated costs, diluted focus, exhausted teams, and shrinking margins. Common sense says that if something is hard to understand, execute, and explain, it is probably hard to make money doing it.
Ventec Evaluates US Manufacturing Facility to Support North American Growth
04/28/2026 | Ventec International GroupVentec International Group today announced that it is evaluating the potential establishment of a manufacturing facility in the United States to support its growing North American customer base with high-performance laminate and prepreg materials.
The Chemical Connection: When the Industry Moves Faster Than the Standards
04/29/2026 | Don Ball -- Column: The Chemical ConnectionAs a supplier of wet processing equipment, we have rules and standards we must adhere to, including both regional and national electrical codes and safety and environmental regulations, as well as myriad other standards to make the equipment safe to use. Things are a little different when it comes to rules and standards for manufacturing PCBs, though, because technical advances and requirements change so quickly that standards can’t keep up.
Cicor Secures New Customers in Q1
04/14/2026 | CicorCicor Group recorded a strong order intake in the first quarter of 2026, in particular driven by the Aerospace & Defence (A&D) market.