Beyond Design: AI-driven Inverse Stackup Optimization
Global PCB Connections: Following DFM Rules Leads to Better Boards
Elementary Mr. Watson: How to Reinvent Your Professional Journey
DfR Solutions Addresses Electronics Risks in Harsh Environments
April 12, 2018 | DfR SolutionsEstimated reading time: 2 minutes
Dr. Craig Hillman, CEO of DfR Solutions, will be speaking at the SMTA Europe Electronics in Harsh Environments Conference in Amsterdam, Netherlands. Dr. Hillman will present How to Design for Reliable Operation at 150C and Higher Temperatures: An Update at the Automotive Session on April 26, co-hosted by iNEMI. Dr. Hillman is one of three automotive electronics experts to be speaking on the panel.
With technology proliferation into automotive and avionics, electronics must be designed to operate reliably at temperatures between 150°C and 175°C. Dr. Hillman will present insights and tradeoffs in designing passives, crystals, magnetics, discretes, integrated circuits, connectors, PCBs and solders to operate reliability within high temperature environments. Dr. Hillman will show how Physics of Failure models can be used to understand the risks of high temperature environments over time and how to effectively mitigate those risks through circuit design, derating and material selection.
The Electronics in Harsh Environments Conference (24-26 April), sponsored by SMTA Europe, tackles the challenges and best practices for building reliable electronic devices that will perform to design standards when used in harsh environments (elevated operating temperatures, high humidity, vibration and more). The three-day conference will also cover topics such as reliable high-density assemblies, power electronics, electric hybrids, product assembly challenges, cleaning, coating, process control, and monitoring and tracking production hardware. Challenging areas such as high-temperature soldering, solder material advances, and new standards will also be addressed.
"I'm honored to be invited to speak at this important European electronics conference," said Dr. Craig Hillman, CEO of DfR Solutions. "Increasingly, more complex electronics are being exposed to harsh environments that can be detrimental to their performance and reliability. Understanding the factors that cause electronics to fail and predicting those failures in advance is critical to safety. Our Reliability Physics modeling and simulation software, Sherlock, is the only tool to predict electronics failures before they ever happen."
About Sherlock Automated Design Analysis Software
Sherlock is the first-of-its-kind Automated Design Analysis software for analyzing, grading, and certifying the expected reliability of products at the circuit card assembly level. Based on Reliability Physics, it is used by the electronics industry across all markets. Sherlock continues to evolve, incorporating new innovations and enhancements allowing users to manage increasingly complex analyses faster and more efficiently than ever before.
About DfR Solutions
DfR Solutions has world-renowned expertise in applying the science of Reliability Physics to electrical and electronics technologies and is a leading provider of quality, reliability, and durability (QRD) research and consulting for the electronics industry. The company’s integrated use of Reliability Physics and Best Practices provides crucial insights and solutions early in product design and development and throughout the product life cycle. DfR Solutions specializes in providing knowledge- and science-based solutions to maximize and accelerate the product integrity assurance activities of their clients in every marketplace for electronic technologies (consumer, industrial, automotive, medical, military, telecom, oil drilling, and throughout the electronic component and material supply chain). For more information regarding DfR Solutions, visit www.dfrsolutions.com.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.