-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueCreating the Ideal Data Package
Why is it so difficult to create the ideal data package? Many of these simple errors can be alleviated by paying attention to detail—and knowing what issues to look out for. So, this month, our experts weigh in on the best practices for creating the ideal design data package for your design.
Designing Through the Noise
Our experts discuss the constantly evolving world of RF design, including the many tradeoffs, material considerations, and design tips and techniques that designers and design engineers need to know to succeed in this high-frequency realm.
Learning to Speak ‘Fab’
Our expert contributors clear up many of the miscommunication problems between PCB designers and their fab and assembly stakeholders. As you will see, a little extra planning early in the design cycle can go a long way toward maintaining open lines of communication with the fab and assembly folks.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
North American PCB Industry Growth Cycle Continues; August Book-to-Bill Ratio Steady at 1.05
October 1, 2018 | IPCEstimated reading time: 3 minutes
IPC—Association Connecting Electronics Industries announced today the August 2018 findings from its North American Printed Circuit Board (PCB) Statistical Program. Year-over-year growth continued for industry sales and orders. The book-to-bill ratio for August held steady at 1.05.
Total North American PCB shipments in August 2018 were up 8.7% compared to the same month last year. This year to date, shipments are 10.3% above the same period last year. Compared to the preceding month, August shipments increased 6.5%.
PCB bookings in August increased 6.8% year-over-year. Year-to-date order growth was 11.0% above the same period last year. Bookings in August were up 9.4% from the previous month.
"North American PCB industry sales and orders continued to grow in August compared to the previous month and the same period last year,” said Sharon Starr, IPC’s director of market research. “August was the 12th consecutive month of year-over-year sales growth and the 15th month of continuous order growth. The book-to-bill ratio in August remained above parity (1.0) for the 19th consecutive month, which is a positive indicator of continued growth for the rest of this year.”
Detailed Data Available
The next edition of IPC’s North American PCB Market Report, containing detailed third-quarter 2018 data from IPC’s PCB Statistical Program, will be available in November. The quarterly report presents detailed findings on rigid PCB and flexible circuit sales and orders, including separate rigid and flex book-to-bill ratios, growth trends by product types and company size tiers, demand for prototypes, sales growth to military and medical markets, and other timely data. This report is available free to current participants in IPC’s PCB Statistical Program and by subscription to others. PCB companies that are IPC members doing business in North America are invited to contact marketresearch@ipc.org for information about participating. More information about this report can be found at www.ipc.org/market-research-reports.
Interpreting the Data
The book-to-bill ratios are calculated by dividing the value of orders booked over the past three months by the value of sales billed during the same period from companies in IPC’s survey sample. A ratio of more than 1.00 suggests that current demand is ahead of supply, which is a positive indicator for sales growth over the next three to twelve months. A ratio of less than 1.00 indicates the reverse.
Year-on-year and year-to-date growth rates provide the most meaningful view of industry growth. Month-to-month comparisons should be made with caution as they reflect seasonal effects and short-term volatility. Because bookings tend to be more volatile than shipments, changes in the book-to-bill ratios from month to month might not be significant unless a trend of more than three consecutive months is apparent. It is also important to consider changes in both bookings and shipments to understand what is driving changes in the book-to-bill ratio.
IPC’s monthly PCB industry statistics are based on data provided by a representative sample of both rigid PCB and flexible circuit manufacturers selling in the USA and Canada. IPC publishes the PCB book-to-bill ratio at the end of each month. Statistics for the current month are normally available in the last week of the following month.
About IPC
IPC is a global industry association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 4,400 member-company sites which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly and test. As a member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $2 trillion global electronics industry. IPC maintains additional offices in Taos, N.M.; Washington, D.C.; Atlanta, Ga.; Stockholm, Sweden; Brussels, Belgium; Moscow, Russia; Bangalore and New Delhi, India; Bangkok, Thailand; and Qingdao, Shanghai, Shenzhen, Chengdu, Suzhou and Beijing, China. For more information, click here.
Suggested Items
AI Helps Build Smarter, More Resilient Power Grids
05/16/2025 | BUSINESS WIREAs society’s reliance on electricity deepens, artificial intelligence (AI) is reshaping how we manage power grids and optimize energy sources.
Join the Conversation: MESI 4.0 Summit 2025
05/15/2025 | Critical ManufacturingThe MES and Industry 4.0 International Summit 2025 (MESI 4.0 Summit), hosted by Critical Manufacturing, will bring together manufacturing leaders, technology experts, and industry pioneers in Porto on June 12-13, offering a unique platform to explore practical strategies for digital transformation and smart manufacturing.
Roca Printed Circuits Joins Forces with Epec Engineered Technologies, NetVia
05/14/2025 | Epec Engineering TechnologiesRoca Printed Circuits and Epec Engineered Technologies announced today that Roca has joined forces with Epec’s NetVia Group PCB division in Dallas, expanding the combined organization's ability to deliver a broader range of high-quality printed circuit boards and electronic solutions.
Innovative Technology Advancements in Test: HATS² Technology and Its Impact on Reliability Testing
05/14/2025 | Barry Matties, I-Connect007Ensuring the reliability of printed circuit boards (PCBs) has become increasingly difficult and critical, yet the development of advanced testing methodologies is essential to meeting industry demands and addressing persistent challenges. One significant innovation is the High Acceleration Thermal Shock (HATS²) test system, which transforms how reliability testing is conducted. After 40 years in the testing business at Microtek, Bob Neves is beginning a new journey with his company, Reliability Assessment Solutions Inc. (RAS).
EWPTE 2025: Wire Processing Innovation Driving Technical Dialogue
05/13/2025 | Brittany Martin, I-Connect007From cutting-edge automation to advanced testing and harness assembly solutions, the 2025 Electrical Wire Processing Technology Expo (EWPTE) delivered a packed exhibit floor, robust technical programming, and valuable peer-to-peer connections.