-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueDesigning Through the Noise
Our experts discuss the constantly evolving world of RF design, including the many tradeoffs, material considerations, and design tips and techniques that designers and design engineers need to know to succeed in this high-frequency realm.
Learning to Speak ‘Fab’
Our expert contributors clear up many of the miscommunication problems between PCB designers and their fab and assembly stakeholders. As you will see, a little extra planning early in the design cycle can go a long way toward maintaining open lines of communication with the fab and assembly folks.
Training New Designers
Where will we find the next generation of PCB designers and design engineers? Once we locate them, how will we train and educate them? What will PCB designers of the future need to master to deal with tomorrow’s technology?
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
Robert Art on the Importance of Thermal Management
January 7, 2019 | Pete Starkey, I-Connect007Estimated reading time: 12 minutes
You've said that most of these materials have been generally based on aluminum, but do you have an equivalent range on copper? Is copper a realistic alternative for very high-performance requirements?
Art: Absolutely. We're seeing many more requests for copper-based IMSs from customers. Of course, there’s an adjustment in price and an added raw weight of their component, but to give their components the life and output that they require, copper is becoming a very common choice as base plate material. In addition to copper, we are looking at other alternative base plate options that can simulate the CTE of copper, but may be less weight than copper and certainly cost less.
Starkey: It would be interesting to have a future discussion when you can disclose what some of these materials are.
Art: Yes, at this stage, I will say there are options out there today in base plate technology that offer some huge benefits to customers.
Starkey: We can have fun talking about that on a separate occasion! Robert, going back to thermal impedance considerations, the thermal conductivity of the IMS material doesn't tell the whole story because we are talking about the thermal impedance of the whole heat path and there are a few interfaces in that heat path. How do you make sure that there is good thermal contact between the device you're trying to cool and the heat-sinking substrate?
Art: Well, Pete, that's a very good lead to a discussion about a new product family that we are offering as a key distributor. We've joined forces with a company called EMI Thermal that carries a full line of thermal interface products that marry very well with the IMS materials that we promote today. There aren't many applications out there where a customer using IMS would directly mate them to a heat sink without some form of secondary thermal interface material, whether that's a thermal grease or a Sil-Pad or a void-filler type product. We've decided that there is value in bringing a full product line to our customers—a full family of products that can help them with their heat issues. In addition to our tec-thermal IMS product line, we've engaged with EMI Thermal to offer a secondary thermal interface product to help them completely remove heat not only from component to IMS board but also to housing or heat sink.
Starkey: What sorts of technologies are involved in the range that you offer?
Art: The most popular technology would be soft compressible materials called void fillers. Other industry names for these products are gap pads or gap fillers, which are compressible soft materials that don't require a lot of pressure or force to dissipate heat. The EMI Thermal family of void fillers covers the required gamut of thermal and compression expectations from customers. In addition, we have some product lines that are reinforced with fiberglass and electrically insulating, so we can offer a full line of products that either dissipate heat with very good thermal resistance characteristics and/or some that have thermal resistance and a decent breakdown voltage. We look at these products as a great complement to the tec-thermal IMS product family.
Starkey: Robert, it occurs to me now that one thing we haven't discussed, which might be very important, is test methods. We've talked about all of these thermal properties, but how do we measure them?
Art: We have a lot of discussions with our business partners on that. The truth is there are lots of different test methods. Ventec’s testing is based on ISO methods, but there are also ASTM test methods, an E1461 test method, and a TO-220 test method. The issue with all these test methods is that, if the customer wants to have a thermal conductivity of 5 watts per meter-Kelvin, we need to understand which test method is being used to define the 5 watts per meter-Kelvin. If a customer were to ask for a product of 12 watts per meter-Kelvin, it is indeed possible! Even if the customer wants a product of 80, 90, 100 watts per meter-Kelvin product, within just about one week, it is entirely possible to figure out a test method which fits the 100 watts per meter-Kelvin. It is quite hard to explain that to our customers because there are a lot of different values out there, and the biggest issue is figuring out what is the truth and what fits the customers’ application.
What we are currently working on is for our technicians to meet with our engineers from Suzhou—together with a university and an OEM customer—to agree on an ASTM test method that can be used by everybody to enable the end customer to figure out and compare between different suppliers. The first stage will be a data sheet with a matrix showing our values depending on different test methods. The second stage would be to support IPC and the OEMs to develop a common test method that all of the IMS suppliers could use. Then we can save a lot of time and discussions because, when I go to visit customers, 70% of my time is taken up in discussions about thermal conductivity and tests. Once we can overcome this so that both sides understand the same terms and can relate to the same test method, then we can spend the time discussing their real needs.
Starkey: Yes. To continue on that point, something I've heard many times in the past is, "Don't believe everything you read on people's data sheets."
Art: It's a good point, but it doesn't mean from our side that our competition is quoting wrong values—absolutely not. They most likely have the right values but simply from a different test method.
Starkey: I should re-phrase my comment. Instead of saying, "Don't believe everything that you see on data sheets," I could say, "Make sure you understand the significance of what you see on the data sheet."
Art: Absolutely. We want to produce something that is very simple and consistent so that an engineer can look at two different data sheets and say, "This product has these attributes, and that product has those attributes." Today, when an engineer sits down with two or three data sheets from different suppliers in the IMS industry, it's very difficult to make an assessment based on those data sheets as to which product best fits his requirements.
Starkey: I understand exactly what you're saying and all of the logic of doing what you're proposing.
Art: Just a short example: If I use an ISO test method, a certain material appears to have a thermal conductivity of about 4 watts per meter-Kelvin. But if the same material is tested based on ASTM, you might get a value of about 2.7 watts per meter-Kelvin. That’s a huge difference between 4 watts and 2.7 watts—not just 10% or 15%; we are really talking about two widely different values for the same material.
We want to be as open as possible in supporting this so that people can make realistic comparisons of materials, and this is the approach that we are taking. If we put it all together, I think we can come up with a proposal that we can promote to IPC. Then, it's up to IPC and the OEMs to push in that direction with input from other OEMs and IMS suppliers.
Starkey: Thank you for that explanation, Robert. It's good to talk with people who know their subject and have a passion for it. Thank you very much for being so open with your information; I really appreciate it.
Art: Thanks for your time, Pete. It's been a great pleasure.
To download your copy of Ventec International Group’s micro eBook, The Printed Circuit Designer's Guide to… Thermal Management with Insulated Metal Substrates, click here.
Page 2 of 2
Suggested Items
Indium’s Karthik Vijay to Present on Dual Alloy Solder Paste Systems at SMTA’s Electronics in Harsh Environments Conference
05/06/2025 | Indium CorporationIndium Corporation Technical Manager, Europe, Africa, and the Middle East Karthik Vijay will deliver a technical presentation on dual alloy solder paste systems at SMTA’s Electronics in Harsh Environments Conference, May 20-22 in Amsterdam, Netherlands.
SolderKing Achieves the Prestigious King’s Award for Enterprise in International Trade
05/06/2025 | SolderKingSolderKing Assembly Materials Ltd, a leading British manufacturer of high-performance soldering materials and consumables, has been honoured with a King’s Award for Enterprise, one of the UK’s most respected business honours.
Knocking Down the Bone Pile: Gold Mitigation for Class 2 Electronics
05/07/2025 | Nash Bell -- Column: Knocking Down the Bone PileIn electronic assemblies, the integrity of connections between components is paramount for ensuring reliability and performance. Gold embrittlement and dissolution are two critical phenomena that can compromise this integrity. Gold embrittlement occurs when gold diffuses into solder joints or alloys, resulting in mechanical brittleness and an increased susceptibility to cracking. Conversely, gold dissolution involves the melting away of gold into solder or metal matrices, potentially altering the electrical and mechanical properties of the joint.
'Chill Out' with TopLine’s President Martin Hart to Discuss Cold Electronics at SPWG 2025
05/02/2025 | TopLineBraided Solder Columns can withstand the rigors of deep space cold and cryogenic environments, and represent a robust new solution to challenges facing next generation large packages in electronics assembly.
BEST Inc. Reports Record Demand for EZReball BGA Reballing Process
05/01/2025 | BEST Inc.BEST Inc., a leader in electronic component services, is pleased to announce they are experiencing record demand for their EZReball™ BGA reballing process which greatly simplifies the reballing of ball grid array (BGA) and chip scale package (CSP) devices.