It’s Only Common Sense: Invest in Yourself—You’re Your Most Important Resource
Dan's Biz Bookshelf: 'Revenge of the Tipping Point'
Marcy's Musings: Engineering Economics
Arlon EMD and US Air Force Academy Establish CRADA
October 4, 2019 | Arlon EMDEstimated reading time: 2 minutes
Arlon EMD, a privately held, veteran owned, specialty laminate manufacturer has entered into an agreement with the United States Air Force Academy to collaborate efforts in researching and developing technology platforms for electronic materials, resin systems and copper-clad laminate products.
The Cooperative Research and Development Agreement (CRADA) between Arlon and the USAFA is a five-year program designed to offer cadets research opportunities in electronic materials science for practical applications in the electronics industry. Under this agreement the USAFA will provide Arlon additional resources for research in material science and resin technologies.
“We are excited to enter into this new relationship with the USAFA. As the only veteran owned, military and aerospace supplier of specialty copper clad laminates in N. America, working with our US Air Force Academy is a good fit. It is an honor to interact with such talented, academically-driven and skilled men and women of our United States Air Force,” stated Brad Foster, President of Arlon.
In this agreement, USAFA cadets will have academic opportunities to conduct research on various resin technologies under the direction of internationally recognized polymer expert Dr. Scott Iacono, Director of the Chemistry Research Center for the USAFA, Colorado Springs, Colorado. “Collaborating with an industrial partner such as Arlon to develop materials will give our cadets exposure to industrial applications of technologies through their independent study courses. We will research resin chemistries and technologies at our USAFA campus and then assist in developing these with Arlon,” commented Dr. Iacono.
About Arlon
Arlon EMD is veteran owned and privately held by CriticalPoint Capital (info@criticalpointcapital.com). Arlon EMD is a US manufacturer and distributor of specialty materials and has supplied specialty materials into the military, avionic, space, semiconductor and petroleum exploration markets for more than 25 years from their manufacturing location in Rancho Cucamonga, California.
For additional information, please visit our website at www.arlonemd.com or contact Deanna Bustamante, Marketing Manager, Deanna.Bustamante@ArlonEMD.com.
About USAFA
With a history of excellence and a focus on the future, the United States Air Force Academy instills cadets with pride and integrity while preparing them to serve their country and succeed in 21st-century careers. As a public university and a military service academy, the USAFA is leading the way into an increasingly complex future, driving advancement and innovation in air, space and cyberspace, among countless other fields. The USAFA has 24 research centers and institutes with emphasis in areas from warfighter effectiveness to high-performance computing. Research at the USAFA reflects the evolving needs of the Air Force in a technology-driven world. Specifically, the Chemistry Research Center (CRC) within the Department of Chemistry at the USAFA focuses on new chemical discoveries to meet operational AF and Department of Defense mission partner needs as well as private partnerships with academia and industry in order to leverage an expanding technology base.
For additional information, please visit our website at www.usafa.edu/research/research-centers/chemistry-research-center
Share on:
Suggested Items
Unlocking Advanced Circuitry Through Liquid Metal Ink
10/31/2024 | I-Connect007 Editorial TeamPCB UHDI technologist John Johnson of American Standard Circuits discusses the evolving landscape of electronics manufacturing and the critical role of innovation, specifically liquid metal ink technology, as an alternate process to traditional metallization in PCB fabrication to achieve ever finer features and tighter tolerances. The discussion highlights the benefits of reliability, efficiency, and yields as a tradeoff to any increased cost to run the process. As this technology becomes better understood and accepted, even sought out by customers and designers, John says there is a move toward mainstream incorporation.
Fresh PCB Concepts: The Critical Nature of Copper Thickness on PCBs
10/31/2024 | Team NCAB -- Column: Fresh PCB ConceptsPCBs are the backbone of modern electronics and the copper layers within these boards serve as the primary pathways for electrical signals. When designing and manufacturing PCBs, copper thickness is one of the most critical factors and significantly affects the board’s performance and durability. The IPC-6012F specification, the industry standard for the performance and qualification of rigid PCBs, sets clear guidelines on copper thickness to ensure reliability in different environments and applications.
Book Excerpt: The Printed Circuit Designer’s Guide to... DFM Essentials, Ch. 1
10/25/2024 | I-Connect007The guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter details high-frequency materials, copper foil types, metal core PCBs, and the benefits of embedded capacitance and resistor materials in multilayer PCBs.
The Cost-Benefit Analysis of Direct Metallization
10/21/2024 | Carmichael Gugliotti, MacDermid AlphaCarmichael Gugliotti of MacDermid Alpha discusses the innovative realm of direct metallization technology, its numerous applications, and significant advantages over traditional processes. Carmichael offers an in-depth look at how direct metallization, through developments such as Blackhole and Shadow, is revolutionizing PCB manufacturing by enhancing efficiency, sustainability, and cost-effectiveness. From its origins in the 1980s to its application in cutting-edge, high-density interconnects and its pivotal role in sustainability, this discussion sheds light on how direct metallization shapes the future of PCB manufacturing across various industries, including automotive, consumer electronics, and beyond.
Connect the Dots: Designing for Reality—Pattern Plating
10/16/2024 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we painted the picture of the outer layer imaging process. Now we are ready for pattern plating, where fabrication can get tricky. The board is now ready to receive the copper traces, pads, and other elements specified in the original CAD design. This article will lay out the pattern plating process and discuss constraints in the chemistries that must be properly managed to meet the customer's exacting manufacturing tolerances.