Fresh PCB Concepts: Key Considerations for Reliability, Performance, and Compliance in PCBs
Elementary Mr. Watson: Navigating RF—A Glide Path Approach to Design Success
Designers Notebook: Layer Stackup Planning for RF Circuit Boards
Words of Advice: 5G Reliability
November 14, 2019 | Andy Shaughnessy, Design007 MagazineEstimated reading time: Less than a minute
In a recent survey, we asked the following question: Do you think 5G will improve the reliability of communication? Here are a few of the answers, edited slightly for clarity.
- I will comment after experiencing.
- We will need many more high-tech cell sites. Weather can interfere!
- Yes, but probably only in built-up urban areas.
- By itself, no, it won’t, since 5G will leverage 4G frequencies. The reliability of the entire 5G network should be enhanced.
- I think it will only be available in some areas.
Share on:
Suggested Items
Indium Wins EM Asia Innovation Award
05/01/2025 | Indium CorporationIndium Corporation, a leading materials provider for the electronics assembly market, recently earned an Electronics Manufacturing (EM) Asia Innovation Award for its new high-reliability Durafuse® HR alloy for solder paste at Productronica China in Shanghai.
Fresh PCB Concepts: Key Considerations for Reliability, Performance, and Compliance in PCBs
05/01/2025 | Team NCAB -- Column: Fresh PCB ConceptsAs a field application engineer with many years of experience, I’ve conducted thousands of designs for manufacturing (DFM) analyses on printed circuit boards (PCBs). From basic one-layer boards to complex high density interconnect (HDI) designs, I’ve provided technical advice across a wide spectrum of technologies.
Rising Star Award: Paavo Niskala, TactoTek
04/28/2025 | Nolan Johnson, I-Connect007Paavo Niskala joined the IPC community in 2022 as part of the inaugural steering group for in-mold electronics. He led the development of standard IPC-8401, Guidelines for In-Mold Electronics, chairing the project from its inception to its publication in 2024. Currently, Paavo serves as vice chair of the D-84A Plastronics Accelerated Reliability Testing Task Group, contributing his expertise to advancing reliability standards in the field.
INEMI Call-for-Participation Webinar: BiSn-Based Low-Temperature Soldering Process and Reliability Project Phase 3b
04/28/2025 | iNEMIIn 2015, INEMI initiated the BiSn-Based Low-Temperature Soldering Process and Reliability Project to assess the feasibility of using low-temperature solders (LTS) in the SnBi system to address various technological, economic and ecological drivers for assembly of consumer computer electronic board products.
Microchip Completes Radiation-Hardened Power MOSFET Family to MIL-PRF-19500/746 and Achieves JANSF 300 Krad Capability
04/22/2025 | MicrochipThe JANS qualification represents the highest level of screening and acceptance requirements, ensuring the superior performance, quality and reliability of discrete semiconductors for aerospace, defense and spaceflight applications.
Copyright © 2025 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in