Dan's Biz Bookshelf: 'Revenge of the Tipping Point'
Marcy's Musings: Engineering Economics
Punching Out: Should You Sell Your Company to a Private Equity Firm?
RBP Releases Circutek CC-720 PTH Acid Cleaner Conditioner
August 4, 2020 | RBP Chemical TechnologyEstimated reading time: Less than a minute
RBP Chemical Technology has recently released Circutek CC-720 PTH Acid Cleaner Conditioner.
Circutek CC-720™ is an acidic cleaner/conditioner for use in the electroless copper metallization process in the PCB industry. It is formulated to remove fingerprints, light soil and other contaminants from copper foil. It also conditions non-metallic surfaces including glass fiber fabric and multiple resin systems used in the construction of high-reliability rigid, rigid-flex and flexible printed circuit boards.
The Circutek CC-720 is formulated to affect maximum adsorption of palladium tin catalyst to insure uniform deposition of the subsequent electroless copper deposit.
Positive Customer Impact
Circutek CC-720 provides the fabricator with wide process latitude with respect to enhancing the chemisorption of the palladium-tin catalyst without building up a heavy conditioning film on the interconnect and resin-glass surfaces. The Circutek CC-720 is acidic in nature and is free-rinsing. Many competitive conditioners on the market often over-condition the resin, leaving it difficult to rinse film. This excessive film causes over adsorption of the catalyst that often leads to defects such as hole-wall pullaway (HWPA) and interconnect defect (ICD)
The Circutek CC-720 is another innovation in RBP’s Circutek PTH Process Technology portfolio.
Share on:
Suggested Items
Unlocking Advanced Circuitry Through Liquid Metal Ink
10/31/2024 | I-Connect007 Editorial TeamPCB UHDI technologist John Johnson of American Standard Circuits discusses the evolving landscape of electronics manufacturing and the critical role of innovation, specifically liquid metal ink technology, as an alternate process to traditional metallization in PCB fabrication to achieve ever finer features and tighter tolerances. The discussion highlights the benefits of reliability, efficiency, and yields as a tradeoff to any increased cost to run the process. As this technology becomes better understood and accepted, even sought out by customers and designers, John says there is a move toward mainstream incorporation.
Fresh PCB Concepts: The Critical Nature of Copper Thickness on PCBs
10/31/2024 | Team NCAB -- Column: Fresh PCB ConceptsPCBs are the backbone of modern electronics and the copper layers within these boards serve as the primary pathways for electrical signals. When designing and manufacturing PCBs, copper thickness is one of the most critical factors and significantly affects the board’s performance and durability. The IPC-6012F specification, the industry standard for the performance and qualification of rigid PCBs, sets clear guidelines on copper thickness to ensure reliability in different environments and applications.
Book Excerpt: The Printed Circuit Designer’s Guide to... DFM Essentials, Ch. 1
10/25/2024 | I-Connect007The guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter details high-frequency materials, copper foil types, metal core PCBs, and the benefits of embedded capacitance and resistor materials in multilayer PCBs.
The Cost-Benefit Analysis of Direct Metallization
10/21/2024 | Carmichael Gugliotti, MacDermid AlphaCarmichael Gugliotti of MacDermid Alpha discusses the innovative realm of direct metallization technology, its numerous applications, and significant advantages over traditional processes. Carmichael offers an in-depth look at how direct metallization, through developments such as Blackhole and Shadow, is revolutionizing PCB manufacturing by enhancing efficiency, sustainability, and cost-effectiveness. From its origins in the 1980s to its application in cutting-edge, high-density interconnects and its pivotal role in sustainability, this discussion sheds light on how direct metallization shapes the future of PCB manufacturing across various industries, including automotive, consumer electronics, and beyond.
Connect the Dots: Designing for Reality—Pattern Plating
10/16/2024 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we painted the picture of the outer layer imaging process. Now we are ready for pattern plating, where fabrication can get tricky. The board is now ready to receive the copper traces, pads, and other elements specified in the original CAD design. This article will lay out the pattern plating process and discuss constraints in the chemistries that must be properly managed to meet the customer's exacting manufacturing tolerances.