Fresh PCB Concepts: Key Considerations for Reliability, Performance, and Compliance in PCBs
Elementary Mr. Watson: Navigating RF—A Glide Path Approach to Design Success
Designers Notebook: Layer Stackup Planning for RF Circuit Boards
Just Ask Eric: Selecting the Right Lead-Free Solder for Your Application
September 15, 2020 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
First, we asked you to send in your questions for Happy Holden and Joe Fjelstad in our “Just Ask” series. Now, it’s Eric Camden’s turn! A regular SMT007 columnist, Eric is a lead investigator at Foresite Inc., an analytical testing and consulting laboratory. As a reliability expert, Eric has worked with many large OEMs and contract manufacturing companies to optimize their manufacturing processes and assist with the identification of electronic hardware failures utilizing various analytical techniques. He also specializes in optimizing PCBA processes and identifying hardware failures through analysis. We hope you enjoy “Just Ask Eric.”
Q: How can I pick out the right lead-free solder for my application?
A: That’s a great question. It’s one I regularly get regarding choosing solder and other process materials. As with most questions like this one, the first answer is always, “It depends.” It depends on variables, such as end-use operating environment, expected life cycle, which IPC product class you need to build to, etc.
You can refer to the IPC J-STD-001 and the related test methods in the TM-650 for determining acceptance criteria like hole-fill, circumferential wetting, etc., but all those requirements are just a start. You may also need to consider additional testing above and beyond what is in the IPC documents or even on the print.
Depending on the operating environment, you might need to consider extended vibration testing or thermal cycling to determine if the solder candidate is a good option. One of the most important things to consider is the ability of your equipment to process it.
At the risk of painting with a broad brush, almost any solder will probably work, but you must be sure you know how to set your equipment parameters to yield a reliable solder joint. If you use cross-section to determine the quality of the solder joint, you need to know how to make parameter adjustments to correct any issues you might be seeing. Picking the solder is really only one part of the equation.
To submit your questions to Eric Camden, click here.
Share on:
Suggested Items
BEST Inc. Reports Record Demand for EZReball BGA Reballing Process
05/01/2025 | BEST Inc.BEST Inc., a leader in electronic component services, is pleased to announce they are experiencing record demand for their EZReball™ BGA reballing process which greatly simplifies the reballing of ball grid array (BGA) and chip scale package (CSP) devices.
Indium Wins EM Asia Innovation Award
05/01/2025 | Indium CorporationIndium Corporation, a leading materials provider for the electronics assembly market, recently earned an Electronics Manufacturing (EM) Asia Innovation Award for its new high-reliability Durafuse® HR alloy for solder paste at Productronica China in Shanghai.
Summit Interconnect Hollister Elevates PCB Prototyping with New TiTAN Direct Imaging System from Technica USA
05/01/2025 | Summit Interconnect, Inc.Summit Interconnect’s Hollister facility has recently enhanced its quick-turn PCB prototyping capabilities by installing the TiTAN PSR-H Direct Imaging (DI) system.
KOKI Expands U.S. Sales Coverage with Multiple New Representatives
04/29/2025 | KOKIKOKI, a global leader in advanced soldering materials and process optimization services, is pleased to announce the expansion of its U.S. sales network with the addition of three new manufacturers’ representative firms: Assembled Product Specialists, Diversitech Reps Inc., and Eagle Electronics.
INEMI Call-for-Participation Webinar: BiSn-Based Low-Temperature Soldering Process and Reliability Project Phase 3b
04/28/2025 | iNEMIIn 2015, INEMI initiated the BiSn-Based Low-Temperature Soldering Process and Reliability Project to assess the feasibility of using low-temperature solders (LTS) in the SnBi system to address various technological, economic and ecological drivers for assembly of consumer computer electronic board products.