Delft Hyperloop Details Eurocircuit Role in PCB Production, Assembly
November 5, 2020 | EurocircuitsEstimated reading time: 1 minute
Every implementation of the Hyperloop system will contain a lot of electronics. Our prototype pod uses 8 electric motors and motor controllers to propel itself. These motors are powered by 2 LiPo battery packs. To connect all of the electrical systems of the vehicle we also need a control PCB including an embedded microcontroller that interfaces with these systems using a CAN interface. Furthermore, this PCB is also used to activate the brakes, readout the position and velocity of the vehicle, send data to an external PC using an Ethernet interface and log on-board data to an SD card. Throughout the year we have ordered a lot of different PCBs that are essential for the functioning of our pod. Eurocircuits facilitated our PCB production and assembly throughout the year.
Using the knowledge of the previous Delft Hyperloop years we could immediately start on our V1, which we decided to assemble ourselves to stay flexible and have even shorter lead times.
This PCB was tested and used long before our pod was produced. By performing integrated tests with our powertrain and propulsion departments, it was possible to find points of improvement early on in the year.
This resulted in PCB V2, which was installed on last year’s pod. With this vehicle, we were able to test our complete electrical design and achieve some rather high speeds at our test track.
After having tested with two prototype PCB versions, we used the Eurocircuits assembly service for V3. This gave us time to continue testing with our older versions and resulted in a highly accurate PCB to be used for our record attempt.
In a year with tight deadlines and many design iterations our collaboration with Eurocircuits was essential to getting a proper functioning electrical system. Because of the short lead times and the variety of different options offered at Eurocircuits, we were able to keep focussing on our designs and always have working PCBs on time for important tests. Especially the Eurocircuits PCB checker has been very useful as it has detected some design errors in our PCB which could be fixed before we ordered the PCB.
Suggested Items
Course Review: IPC’s New Semiconductor Course Provides a Thorough Layman’s View
01/22/2025 | Nyron Rouse, IPCTaking the course, A Technical Overview of the Semiconductor CHIP Industry by Cheah Soo Lan wasn’t just a professional box to check for me; it was an opportunity to understand the technical backbone of a field that directly influences the work I do at IPC. While I’m not immersed in the technical aspects of semiconductors day to day, learning about this landscape allows me to better align our funding pursuits with the strategic needs of the industry.
An Inspiring Journey From Animation to PCB Design
01/20/2025 | Marcy LaRont, I-Connect007I recently spoke with Melissa Martinez, a PCB design student in John Watson’s class at Palomar College. In this interview, Melissa shares her inspiring journey from the world of animation to the realm of printed circuit board design. Introduced to the field by her father, an engineer at Northrop Grumman, she discovered her passion for PCB design through John’s curriculum at Palomar. Her story highlights the importance of mentorship and education in attracting new talent to the industry, encouraging young individuals to explore opportunities they may not yet know exist.
I-Connect007 Editor's Choice: Five Must-Reads for the Week
01/17/2025 | Nolan Johnson, I-Connect007We’re even more committed to being your best source for industry news and tips and tricks of the trade. To that end, I’m sharing my favorite news items of the week. They range from reports on quarterly earnings to Dan Feinberg’s coverage of CES and some harsh reality from marketing expert Dan Beaulieu. If you missed it on Monday, be sure to read it again here. It’s well worth your time.
See You in Vienna: Speaker Spotlight on PEDC
01/16/2025 | I-Connect007 Editorial TeamVienna, Austria, is known for its amazing architecture, art museums, and classical music scene. But from now on, Vienna might also be known for its PCB design conference. IPC and FED have partnered to create a new PCB design conference in there. The Pan-European Electronics Design Conference (PEDC) takes place Jan. 29-30, 2025 at the NH Danube City hotel in Vienna.
RIKEN Adopts Siemens' Emulation And High-Level Synthesis Platforms for Next-Generation AI Device Research
01/16/2025 | SiemensSiemens Digital Industries Software announced today that RIKEN, a national research and development agency in Japan, is enhancing its research on next-generation AI devices with Siemens' comprehensive Veloce™