-
-
News
News Highlights
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssuePower Integrity
Current power demands are increasing, especially with AI, 5G, and EV chips. This month, our experts share “watt’s up” with power integrity, from planning and layout through measurement and manufacturing.
Signal Integrity
If you don’t have signal integrity problems now, you will eventually. This month, our expert contributors share a variety of SI techniques that can help designers avoid ground bounce, crosstalk, parasitic issues, and much more.
Proper Floor Planning
Floor planning decisions can make or break performance, manufacturability, and timelines. This month’s contributors weigh in with their best practices for proper floor planning and specific strategies to get it right.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
Survey: Reasons U.S. Electronics Manufacturers May Exit Defense Market
June 9, 2021 | IPCEstimated reading time: 2 minutes

In a new IPC industry survey and report, one-quarter (24 percent) of electronic manufacturers say the costs and burdens of compliance with the Cybersecurity Maturity Model Certification (CMMC) may force them out of the U.S. Department of Defense’s (DoD) supply chain.
The survey conducted by IPC, the global electronics manufacturing association, also finds that for many small- to medium-size businesses (SMB), the costs and burdens of CMMC compliance may outweigh the benefits of doing business with the DoD.
In addition, 33 percent of respondents say the CMMC will weaken the U.S. defense electronics industrial base, while 18 percent are unsure, highlighting the uncertainties involved. And 41 percent believe applying the CMMC clause to their suppliers will create other problems in the supply chain.
“Cybersecurity is a must for U.S. national security, but the costs and burdens of achieving CMMC compliance under the current approach will likely force many small and medium-sized manufacturers out of the DoD supply chain, negatively impacting national security,” said John Mitchell, IPC president and CEO. “The objectives of CMMC are well-intentioned, but they must not be achieved at the expense of other key aspects of supply chain health.”
Most suppliers expect and are willing to spend upwards of $50,000 on CMMC readiness, and nearly one-third (32 percent) report that it will take them one to two years to prepare to undergo CMMC assessment. However, more than half of the suppliers say implementation costs of more than $100,000 would make CMMC readiness too expensive. DoD’s own cost analysis estimated the cost of a CMMC Maturity Level 3 (ML3) certification to be more than $118,000 in the first year. This means DoD’s own estimate of CMMC compliance costs is too high for 77 percent of the IPC survey respondents.
“The Pentagon needs to take into consideration that most SMBs do not have dedicated cybersecurity personnel to achieve the prerequisites, and while many commercial electronics manufacturers have considerable business with the defense community, they themselves do not consider themselves a defense contractor,” added Mitchell.
The study’s author, cyber security expert Leslie Weinstein, says the DoD can reduce the costs and uncertainties of CMMC compliance by leveraging existing industry standards and certifications, such as IPC-1791, the electronics industry’s “Trusted Supplier” standard, which was designed in collaboration with the DoD; or the certifications offered by HITRUST or the International Standards Organization.
“The DoD recognizes a variety of respected, industry-driven certifications when it comes to hiring cybersecurity professionals,” says Weinstein. “Taking the same approach to certifying suppliers would allow companies to invest more in security than in redundant audits, and it would quickly create a pool of companies who are able to bid on DoD solicitations containing the CMMC DFARS clause. And importantly, it would prevent further erosion of the U.S. defense industrial base.”
IPC fielded the survey between February 25 and March 5, 2021 and garnered 108 responses from contract manufacturers, printed circuit board fabricators, original equipment manufacturers and suppliers who self-reported they are planning to undergo a CMMC assessment in the next five years.
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
NOVOSENSE, UAES and Innoscience Advance Power Electronics for New Energy Vehicles
10/17/2025 | PRNewswireThe partnership focuses on developing next-generation intelligent integrated Gallium Nitride (GaN) products. Leveraging their combined expertise, the new devices will deliver more reliable GaN driving and protection features, enabling higher power density and paving the way for wider adoption in automotive systems.
Jabil Announces Board Transitions
10/17/2025 | JabilJabil Inc. announced that Executive Chairman of the Board of Directors Mark T. Mondello and Directors Kathleen A. Walters and Jamie Siminoff will not seek re-election at Jabil’s Annual Meeting of Stockholders in January 2026.
StenTech Strengthens Precision Parts Platform with AME Acquisition
10/17/2025 | StenTechStenTech, North America’s leading provider of SMT printing solutions and precision manufacturing, has announced the acquisition of Advanced Metal Etching, Inc. (AME), a recognized specialist in chemically etched and laser cut precision parts.
MKS’ Atotech, ESI to Participate in TPCA Show & IMPACT Conference 2025
10/17/2025 | MKS’ AtotechMKS Inc., a global provider of enabling technologies that transform our world, announced that its strategic brands Atotech (process chemicals, equipment, software, and services) and ESI (laser systems) will showcase their latest range of leading manufacturing solutions for printed circuit board (PCB) and package substrate manufacturing at the upcoming 26th TPCA Show 2025 to be held at the Taipei Nangang Exhibition Center from 22-24 October 2025.
Rehm Wins Mexico Technology Award for CondensoXLine with Formic Acid
10/17/2025 | Rehm Thermal SystemsModern electronics manufacturing requires technologies with high reliability. By using formic acid in convection, condensation, and contact soldering, Rehm Thermal Systems’ equipment ensures reliable, void-free solder joints — even when using flux-free solder pastes.