Beyond Design: Slaying Signal Integrity Villains
Elementary Mr. Watson: Running the Signal Gauntlet
The Shaughnessy Report: Winning the Signal Integrity Battle
Call-for-Participation Webinar: iNEMI Electromigration of SnBi Solder for Second-Level Interconnect Project
January 7, 2022 | iNEMIEstimated reading time: 1 minute
The low melting temperature of SnBi alloys (138°C) makes them attractive for assembling thermally warpage-prone high-density microelectronic packaging. However, Bi has a high propensity for electromigration and segregation at the anode under high current density conditions. This can lead to potentially brittle solder joints with high electrical resistance over time in the field. There is a need to mitigate this shortcoming and develop SnBi solder joints that maintain their performance and reliability over the product life. This iNEMI project will explore the potential to reduce electromigration in low-height solder joints by taking advantage of mechanical and/or chemical back stresses.
Objective
The overall project objective is to determine the boundaries of the envelope formed by joint height, temperature, current density and PCB finishes within which the solder joint will operate reliably over the product life.
The project has multiple phases planned. The first phase will:
- Establish an appropriate test vehicle for electromigration study of solder joints, including a convenient means of achieving various joint heights.
- Investigate the role of back pressure in reducing electromigration in eutectic SnBi solder joints by determining the rate of electromigration of SnBi solder joints with and without diffusion barriers as a function of current density, temperature and joint height.
The Electromigration of SnBi Solder for Second-Level Interconnect project is open for sign-up until January 31, 2022. Two call-for-participation webinar sessions are scheduled to introduce the project. These webinars are open to industry; advance registration is required.
Registration
Tuesday, January 11, 2022
10:00-11:00 a.m. EST (Americas)
3:00-4:00 p.m. CET (Europe)
11:00-12:00 p.m. CST (China)
Register for this webinar
Thursday, January 13, 2022
9:00-10:00 a.m. CST (China)
8:00-9:00 p.m. EST (Americas) on January 12
Register for this webinar
Share on:
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Knocking Down the Bone Pile: Best Practices for Electronic Component Salvaging
09/17/2025 | Nash Bell -- Column: Knocking Down the Bone PileElectronic component salvaging is the practice of recovering high-value devices from PCBs taken from obsolete or superseded electronic products. These components can be reused in new assemblies, reducing dependence on newly purchased parts that may be costly or subject to long lead times.
Koh Young, Fuji, and Kurtz ERSA Drive Smart Manufacturing Solutions for EV and Automotive Electronics at Kunshan, China Technical Seminar
09/11/2025 | Koh YoungKoh Young Technology, the global leader in True 3D measurement-based inspection solutions, partnered with Fuji Corporation and Kurtz ERSA to host an exclusive technical seminar for leading automotive manufacturers in East China. Held on September 4 at Fuji’s factory in Kunshan, the event gathered participants representing over 35 companies.
MacDermid Alpha Presents at SMTA New Delhi, Bangalore Chapter, on Flux–OSP Interaction
09/09/2025 | MacDermid Alpha Electronics SolutionsMacDermid Alpha contributes technical insights on OSP solderability at the Bangalore Chapter, SMTA reinforcing commitment to knowledge-sharing and industry collaboration.
Electra’s ElectraJet EMJ110 Inkjet Soldermask Now in Black & Blue at Sunrise Electronics
09/08/2025 | Electra Polymers LtdFollowing the successful deployment of Electra’s Green EMJ110 Inkjet Soldermask on KLA’s Orbotech Neos™ platform at Sunrise Electronics in Elk Grove Village, Illinois, production has now moved beyond green.
Absolute EMS: The Science of the Perfect Solder Joint
09/05/2025 | Absolute EMS, Inc.Absolute EMS, Inc., a six-time award-winning provider of fast turnaround, turnkey contract electronic manufacturing services (EMS), is drawing attention to the critical role of 3D Solder Paste Inspection (SPI) in ensuring the reliability of both FLEX and rigid printed circuit board assemblies (PCBAs).