The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Indium’s Dr. Ron Lasky to Present InSIDER Series Webinar on SMTA Certification
April 18, 2022 | Indium CorporationEstimated reading time: 1 minute
Indium Corporation’s Dr. Ron Lasky will share his insight on SMTA certification as part of the company’s popular InSIDER Series of webinars. The presentation, Are You a Candidate for SMTA Certification?, will take place on Tuesday, May 17 at 10:30 a.m. San Francisco/1:30 p.m. New York/6:30 p.m. London/7:30 p.m. Germany.
In this webinar, Dr. Lasky, a co-founder of the SMTA Certification Program, will review some of the topics that are covered in the certification process. The webinar will start with a review of 10 short-answer questions that certification candidates are expected to know coming into the exam preparation course. At the end of webinar, a review of the exam preparation course will be given and attendees will have a sense of what the exam preparation course and the exam itself are like. Click here to register.
Dr. Ron Lasky is a senior technologist at Indium Corporation, as well as a professor of engineering at Dartmouth College, Hanover, N.H., U.S. He has more than 30 years of experience in electronics and optoelectronics packaging at IBM, Universal Instruments, and Cookson Electronics. He has authored six books and contributed to nine others on science, electronics, and optoelectronics; he has authored numerous technical papers. Additionally, he has served as an adjunct professor at several colleges, teaching more than 20 different courses on topics such as electronics packaging, materials science, physics, mechanical engineering, and science and religion.
Dr. Lasky holds numerous patent disclosures and is the developer of several SMT processing software products relating to cost estimating, line balancing, and process optimization. He is the co-creator of engineering certification exams that set standards in the electronics assembly industry worldwide. Dr. Lasky was awarded the Surface Mount Technology Association’s (SMTA) Technical Distinction Award in 2021 for his “significant and continuing technical contributions to the SMTA.” He was also awarded SMTA’s prestigious Founder’s Award in 2003.
Download The Printed Circuit Assembler’s Guide to… Solder Defects by Christopher Nash and Dr. Ronald C. Lasky. You can also view other titles in our full I-007e Book library here.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.