-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueBreaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
Level Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Tips for Designing in—and Escaping From—the Vacuum
May 10, 2022 | I-Connect007 Editorial TeamEstimated reading time: 3 minutes
For decades, fabricators and PCB design instructors have preached a steady gospel: “Communicate with your manufacturer early and often.” But many designers find themselves working with no idea who will be fabricating or assembling the board, not to mention dealing with the usual missing data, such as impedance requirements.
We asked Monsoon Solutions VP of Engineering Jen Kolar if she had any thoughts on “designing in a vacuum,” and her response was, “Absolutely!” In this wide-ranging discussion, Jen and Senior PCB Engineer and Director of Designer Development Cory Grunwald share some tips and techniques for designing PCBs in a vacuum, and a few methods for getting out of the Hoover’s dust bag.
As Cory points out, “In the end, the communication is going to happen anyway. It’s just a matter of whether it happens at the end or in the beginning.”
Barry Matties: For years, we’ve heard fabricators and design instructors recommend that designers communicate with their manufacturers, and as early in the design process as possible. However, we are often told that the PCB designer does not know who the fabricator is going to be when they embark on the design. As a design service, how do you approach that?
Jen Kolar: That can be one of the big tricks when we’re working with a lot of different customers. If we’re managing the fabrication, then that’s easy. Many of our customers, however, want to be that interface. They want to be the one who passes the data back and forth, and thus things get lost in translation, and that can add a lot of time. We’ve found that can be a real barrier if the designer isn’t able to directly talk to the manufacturer, even if we’re trying to. Our best practice is that our designers always verify information with the fab manager in advance.
Andy Shaughnessy: Everyone talks about DFM and the need for communication, but in the end, there’s almost no communication with the fabricator because they don’t know where the board will be built. So, instead of telling designers to talk to your manufacturer, maybe we should just embrace reality and call it “designing in a vacuum?”
Cory Grunwald: If I’m working with a customer and I don’t know which fab shop I’m going to, I must make a lot of assumptions. I must work over what I expect a minimum trace and space or minimum via sizes will be. I’ll start with a capability sheet from a known supplier that we’ll go through. But then I must add a little bit to what I expect for those tolerances, because I don’t know if they’re going to a shop that can do 3-mil trace and space, or if a shop has to go to 5 mils.
Matties: When you’re designing like that, what’s the downside?
Grunwald: The downside is you can’t be on the cutting edge. You can’t be working on the smallest parts and the thinnest traces and spaces because you don’t know who it’s going to and who can handle it.
Matties: But is the design that you’re allowing some tolerance for still a successful design?
Grunwald: Yes. It can be a successful design, but as you know, projects are getting smaller and faster, and those requirements usually require a top-end board shop. Without talking to your shop directly, you can’t assume that you’re going to a place that can do it.
To read this entire conversation, which appeared in the May 2022 issue of Design007 Magazine, click here.
Suggested Items
Würth Elektronik in United States Embarks on New Milestone with State-of-the-Art Headquarters
05/17/2024 | Wurth ElektronikWürth Elektronik in the United States, a leading manufacturer of electronic and electromechanical components as well as custom magnetics, has announced the commencement of construction on a new 70,000-square-foot headquarters. This new facility underscores the company’s commitment to innovation and grow in the electronics industry.
IPC APEX EXPO: Some Thoughts About Growth
05/16/2024 | Dan Feinberg, I-Connect007After two and a half days of wandering the aisles at IPC APEX EXPO 2024, for the first time, I almost felt like I was exploring CES. There were so many booths and exhibits that I could describe, but I’d like to focus on the growth and huge value of this event, which has expanded well beyond just the growing and impressive exhibit show floor.
Airbus Achieves Eurodrone’s Preliminary Design Review
05/16/2024 | AirbusThe Eurodrone programme has successfully performed the Preliminary Design Review (PDR). Led by Airbus Defence and Space as prime contractor, this major programme milestone has been completed with OCCAR and representatives of the four customer nations (France, Germany, Italy and Spain) in the presence of the three Major Sub-Contractors (MSC), Airbus Defence and Space Spain, Dassault Aviation and Leonardo.
A Review of the 2024 Del Mar Electronics and Manufacturing Show
05/16/2024 | Barry Matties, I-Connect007The Del Mar Electronics and Manufacturing Show (DMEMS) in Del Mar, California, recently took place at an unlikely venue: the Del Mar Fairgrounds. Doug Bodenstab, founder and show organizer, says the show covers everything in electronics manufacturing: design tools, components, base materials, training, testing, board fabrication, AI, data analytics, and more. While you can find about anything online these days, Bodenstab adds that there is no substitute for meeting people in person.
TactoTek Licenses IMSE Technology to Polestar for Sustainable Electronics Design Innovation
05/15/2024 | TactoTekPolestar, the Swedish electric performance car brand, and Finnish smart surface pioneer TactoTek, have entered a collaboration to explore integration of Injection Molded Structural Electronics (IMSE) technology into Polestar’s vehicle programs.