-
-
News
News Highlights
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLearning to Speak ‘Fab’
Our expert contributors clear up many of the miscommunication problems between PCB designers and their fab and assembly stakeholders. As you will see, a little extra planning early in the design cycle can go a long way toward maintaining open lines of communication with the fab and assembly folks.
Training New Designers
Where will we find the next generation of PCB designers and design engineers? Once we locate them, how will we train and educate them? What will PCB designers of the future need to master to deal with tomorrow’s technology?
The Designer of the Future
Our expert contributors peer into their crystal balls and offer their thoughts on the designers and design engineers of tomorrow, and what their jobs will look like.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
IPC Training Course on PCB Design for Manufacturability
August 16, 2022 | IPCEstimated reading time: 1 minute

IPC will be holding a training course on PCB Design for Manufacturability Sept. 13–29, 2022. The three-week online program is designed to provide the knowledge and skills necessary to reduce or eliminate design, documentation, and capability issues that often arise when completed PCB designs are sent to the fabricator for production.
Held Tuesdays and Thursday, from noon to 2 p.m. Eastern, the course will be taught by an industry expert with more than 40 years of experience in the field.
The course includes discussions on DfM, fabricator capability and materials, panelization, stackups and surface finishes, conductive features, holes/vias and other mechanical features, masks and inks, impedance and signal loss, and electrical test, and FPC, documentation, and specifications.
Moreover, participants will receive the following helpful documents developed by Korf Consultancy LLC.
1. PCB Fabrication Design Rules
This editable document is designed to help PCB designers avoid many of the issues identified during the fabricator’s initial DFM review. It provides an extensive list of sample design rule parameters that designers can use to ensure that their designs are compatible with fabricator capabilities before the fabricator’s initial review. These globally representative design parameters are based on the most recent PCB design requirements.
2. Rigid PCB Fabrication Acceptance Specification
This editable document provides recommended qualification and performance specifications for all IPC-6012 requirements defined as AABUS (As Agreed Between User and Subscriber). Designers can use this document to inform fabricators of their company’s specific manufacturing, documentation, and quality requirements, inclusive of those that do not appear in IPC Standards.
For more information, visit https://training.ipc.org/product/pcb-design-manufacturability.
Suggested Items
Intervala Hosts Employee Car and Motorcycle Show, Benefit Nonprofits
08/27/2024 | IntervalaIntervala hosted an employee car and motorcycle show, aptly named the Vala-Cruise and it was a roaring success! Employees had the chance to show off their prized wheels, and it was incredible to see the variety and passion on display.
KIC Honored with IPC Recognition for 25 Years of Membership and Contributions to Electronics Manufacturing Industry
06/24/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, is proud to announce that it has been recognized by IPC for 25 years of membership and significant contributions to electronics manufacturing.
Boeing Starliner Spacecraft Completes Successful Crewed Docking with International Space Station
06/07/2024 | BoeingNASA astronauts Barry "Butch" Wilmore and Sunita "Suni" Williams successfully docked Boeing's Starliner spacecraft to the International Space Station (ISS), about 26 hours after launching from Cape Canaveral Space Force Station.
KIC’s Miles Moreau to Present Profiling Basics and Best Practices at SMTA Wisconsin Chapter PCBA Profile Workshop
01/25/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, announces that Miles Moreau, General Manager, will be a featured speaker at the SMTA Wisconsin Chapter In-Person PCBA Profile Workshop.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.