-
-
News
News Highlights
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueSilicon to Systems: From Soup to Nuts
This month, we asked our expert contributors to weigh in on silicon to systems—what it means to PCB designers and design engineers, EDA companies, and the rest of the PCB supply chain... from soup to nuts.
Cost Drivers
In this month’s issue of Design007 Magazine, our expert contributors explain the impact of cost drivers on PCB designs and the need to consider a design budget. They discuss the myriad design cycle cost adders—hidden and not so hidden—and ways to add value.
Mechatronics
Our expert contributors discuss the advent of mechatronics in PCB design, the challenges and opportunities this creates for circuit board designers, and the benefits—to the employee and the company—of becoming a mechatronics engineer.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
3D Electronic Devices With Additive Manufacturing
November 29, 2022 | Shavi Spinzi, Nano DimensionEstimated reading time: 1 minute
Imagine fabricating PCBs without the hassle of drilled vias and metal plating. Imagine PCBs with near-perfect registration. If we take it to the next stage, imagine drawing electronics in 3D space.
There is a way to do all this with additively manufactured electronics (AME). We just need to start to think in 3D. This will allow us to abandon the 2D limitations that we have become so used to and expand our horizons so that we can climb to higher levels of performance.
In this article, I will explore the two fundamental capabilities that are the cornerstones for drawing electronics in 3D space, which is where AME technology and 3D design capabilities converge.
The First Cornerstone of AME: Isolation and Conductive Materials
More than a decade ago, we saw the rise of printed electronics (PE), which is printing of conductive traces on a predefined substrate. The substrate is fixed, can be planar or a 3D shape and the printing process—either inkjet, aerosol jetting, or any other method—places the conductor on top of it.
AME differs from PE because it uses more than one material. The simplest configuration for AME consists of two materials: one conductive and one isolation/dielectric. It has the potential to grow to more than two materials by adding combinations of different conductive and isolation materials as well as sacrificial materials to build channels and different complex structures.
Why Do We Need 3D PCB Structures?
The first stage of AME was to imitate traditional PCB 2D structures by building multilayer boards (MLB), plated through-holes (PTH), and microvias to prove that AME can replace "traditional" PCB processes. It certainly is doable, but it does not achieve the full potential and capabilities of 3D AME.
To read this entire article, which appeared in the November 2022 issue of PCB007 Magazine, click here.
Suggested Items
Altus Hosts Record-Breaking 'Factory of the Future' Event
09/17/2024 | Altus GroupAltus Group, a leading distributor of capital equipment in the UK and Ireland, in partnership with Fuji Corp., recently held its second ‘Factory of the Future’ event at the Advanced Manufacturing Technology Centre (AMTC) in Coventry.
The Government Circuit: News on Defense Electronics, Europe, and Sustainability
09/17/2024 | Chris Mitchell -- Column: The Government CircuitSeptember in the United States is the season for back-to-school and football. In the arena of government policy advocacy, it’s the season for election campaigning and wrapping up the work of the current session of Congress. This month, there will be a flurry of efforts in Congress by legislators to complete action on “must-do” legislation, especially spending plans for FY25, which begins Oct. 1. In October, there will be a recess for the home stretch of the campaign; in November and December, there will be one more round of policy action by the “lame duck” office holders before the new U.S. government takes office in January. Now is the time for us to try and get those ducks in a row.
ASC Sunstone Circuits to Exhibit at the Anaheim Electronics & Manufacturing Show (AEMS) 2024
09/16/2024 | ASC SunstoneAmerican Standard Circuits | ASC Sunstone will be exhibiting at the Anaheim Electronics & Manufacturing Show 2024 to be held October 2-3 at the Anaheim Conventions Center in Anaheim, California.
IPC Releases Newest List of Standards Updates, Revisions
09/16/2024 | IPC Community Editorial TeamEach quarter, IPC releases a list of standards that are new or have been updated. To view a complete list of newly published standards and standards revisions, translations, proposed standards for ballot, final drafts for industry review, working drafts, and project approvals, visit ipc.org/status. These are the latest releases for Q3 2024.
DuPont Showcases Silver Nanowire Technologies at SID Vehicle Displays and Interfaces 2024
09/13/2024 | DuPontDuPont showcased its unique and advanced silver nanowire technologies at the SID Vehicle Displays and Interfaces 2024. Leveraging its recently acquired assets from C3 Nano, Inc.