Target Condition: Are Autorouters Friend or Foe?
Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
December 9, 2022 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes
We’re into December, and the new year is around the corner. Things are looking pretty good for our industry. Trade show attendance is back up to pre-COVID levels, and a lot of companies are having banner years. Has the virtual trade show gone the way of the dodo bird? Let’s hope!
This week, our must-reads include articles and news items on the decline of R&D, STEM education for kids, why vias do not heat up, the need for more DFT, and the lack of movement toward intelligent data transfer. Designers just love their Gerbers, but Dana Korf has a few ideas about how to make Gerbers obsolete.
Have a good weekend!
R&D Takes Back Seat Amidst Chip Shortage—But It Shouldn’t
Published December 8
R&D has been in a precarious position ever since the demise of the old captive system, and the recent supply chain brouhaha has put a squeeze on the remaining research and development. Malcolm Thompson of NextFlex explains why this doesn’t have to be the case, and what can be done to get the white-coated folks in this industry back to their microscopes.
Dana on Data: PCB Data Transfer Non-evolution
Published December 8
Columnist Dana Korf has made it his mission to spearhead the switch to intelligent data transfer, since many of the errors found by CAM are the result of inefficient data transfer. In this column, Dana points out that many PCB designers are now transferred on scanned copies of paper documents, and he offers a few suggestions for ways to jump-start the move to a completely intelligent data transfer.
Siemens’ Hour of Engineering to Spark Middle School Interest in STEM
Published December 7
We always say, “Get the kids interested in STEM when they’re young.” Well, Siemens is doing just that, taking their show on the road to middle schools. At 11 and 12 years old, they’re able to grasp concepts like this, and it just might get them thinking about a career in STEM as they go through high school and college. And they can probably sit through one hour. We need to do more to reach the K-12 students.
Electronics vs. Physics: Why Vias Don’t Get Hot
Published December 6
Why don’t vias get hot? It seems like they would heat up, since they connect multiple layers full of traces that do heat up. But that’s not the case, as Doug Brooks and Johannes Adam report in this article. They explain why vias don’t heat up, why thermal vias don’t work, and which parts of IPC-2152 are out of date regarding vias and temperatures. You might wind up understanding Joule heating!
The Test Connection: Spreading the Word About DFT
Published December 7
The drive for DFT is picking up steam now, after years of being seen as an unnecessary option. Increasing signal speeds and shrinking features have made DFT a necessity now. At PCB Carolina, I spoke with Bert Horner of The Test Connection about the need for designers to keep test in mind, and why DFT can’t be considered an afterthought for most of today’s designs.
Share on:
Suggested Items
The Global Electronics Association Releases IPC-8911: First-Ever Conductive Yarn Standard for E-Textile Application
07/02/2025 | Global Electronics AssociationThe Global Electronics Association announces the release of IPC-8911, Requirements for Conductive Yarns for E-Textiles Applications. This first-of-its-kind global standard establishes a clear framework for classifying, designating, and qualifying conductive yarns—helping to address longstanding challenges in supply chain communication, product testing, and material selection within the growing e-textiles industry.
IPC-CFX, 2.0: How to Use the QPL Effectively
07/02/2025 | Chris Jorgensen, Global Electronics AssociationIn part one of this series, we discussed the new features in CFX Version 2.0 and their implications for improved inter-machine communication. But what about bringing this new functionality to the shop floor? The IPC-CFX-2591 QPL is a powerful technical resource for manufacturers seeking CFX-enabled equipment. The Qualified Product List (QPL) helps streamline equipment selection by listing models verified for CFX compliance through a robust third-party virtual qualification process.
Advancing Aerospace Excellence: Emerald’s Medford Team Earns Space Addendum Certification
06/30/2025 | Emerald TechnologiesWe’re thrilled to announce a major achievement from our Medford, Oregon facility. Andy Abrigo has officially earned her credentials as a Certified IPC Trainer (CIT) under the IPC J-STD-001 Space Addendum, the leading industry standard for space and military-grade electronics manufacturing.
Magnalytix and Foresite to Host Technical Webinar on SIR Testing and Functional Reliability
06/26/2025 | MAGNALYTIXMagnalytix, in collaboration with Foresite Inc., is pleased to announce an upcoming one-hour Webinar Workshop titled “Comparing SIR IPC B-52 to Umpire 41 Functional & SIR Test Method.” This session will be held on July 24, 2025, and is open to professionals in electronics manufacturing, reliability engineering, and process development seeking insights into new testing standards for climatic reliability.
IPC Rebrands as Global Electronics Association: Interview With Dr. John W. Mitchell
06/22/2025 | Marcy LaRont, I-Connect007Today, following a major announcement, IPC is embracing the rapid advancement of technology with a bold decision to change its name to the Global Electronics Association. This name more accurately reflects the full breadth of its work and the modern realities of electronics manufacturing. In this exclusive interview, Global Electronics Association President and CEO Dr. John W. Mitchell shares the story behind the rebrand: Why now, what it means for the industry, and how it aligns with the organization’s mission.