It’s Only Common Sense: Be the Solution, Not the Problem
American Made Advocacy: Long-time Challenges Confront a New Administration
Marcy's Musings: It's Show Time!
iNEMI's Call-for-Participation Webinar Package Warpage Prediction and Characterization Project, Phase 6
December 26, 2022 | iNEMIEstimated reading time: 1 minute
iNEMI is continuing a series of projects addressing package warpage challenges with Phase 6 of the Package Warpage Prediction and Characterization project. Packaging technology is aggressively evolving to meet new user demands and requirements. Understanding the dynamic warpage characteristics of electronic packages is critical for seamless board assembly.
iNEMI has completed five projects addressing warpage metrology challenges, measured and tracked recent trends in package warpage, and identified gaps in warpage simulation. While the previous projects focused on organic substrate packages, Phase 6 will focus on panel level packaging with inorganic material, such as glass substrate or carrier. The project will continue to:
-
Conduct dynamic warpage characterization of the latest advanced packaging technologies from real samples to track trends and the typical range of warpage
-
Establish a reliable modeling framework to optimize package dynamic warpage simulation
Join our call-for-participation webinar to learn more about the project and how it can benefit your organization.
Registration
This webinar is open to industry; advance registration is required (see SMTA's website). Deadline for project sign-up is February 13, 2023.
Session 1
Tuesday, January 10, 2023
9:00-10:00 a.m. CST (China)
8:00-9:00 p.m. EST (U.S.) on January 9
Session 2
Tuesday, January 10, 2023
7:00-8:00 a.m. EST (U.S.)
1:00-2:00 p.m. CET (Europe)
8:00-9:00 p.m. CST (China)
Share on:
Suggested Items
INEMI Sessions at IPC APEX EXPO Focus is on Board Assembly and PCB & Laminates
03/12/2025 | iNEMIIf you plan to attend the upcoming IPC APEX EXPO in Anaheim, California, be sure to add the INEMI sessions to your calendar. We will have two forward-looking sessions — one on PCB and Laminates and the other on Board Assembly.
iNEMI Hosts Two Sessions at IPC APEX EXPO, Focus on Roadmap for PCB, Assembly, and Laminates
02/26/2025 | iNEMIThe International Electronics Manufacturing Initiative (INEMI) will have two forward-looking sessions at the upcoming IPC APEX EXPO in Anaheim, California (March 18-20). Both sessions are open to conference attendees with a (free) Event Essentials Pass. The two sessions are outlined below.
INEMI to Kick Off Webinar on Ecological Footprint Minimization for Sustainable Electronics Roadmap
02/12/2025 | iNEMIThe International Electronics Manufacturing Initiative (INEMI) will host a webinar on February 13, 2025, at 11:00 a.m. EST (5:00 p.m. CST) to initiate the next phase of development for its Sustainable Electronics Roadmap.
iNEMI Shares Resources With Industry
02/12/2025 | Grace O'Malley, iNEMISince 1996, iNEMI has provided a forum in which its members can leverage their expertise, manpower, and research resources to identify industry needs and efficiently enable new technology development and deployment for high-volume manufacturing.
INEMI Launches Webinar on Ecological Footprint Minimization for Sustainable Electronics Roadmap
02/05/2025 | iNEMIJoin us for an insightful webinar as INEMI kicks off the development of additional content for the Sustainable Electronics Roadmap, focusing on ecological footprint minimization.