Beyond Design: AI-driven Inverse Stackup Optimization
Global PCB Connections: Following DFM Rules Leads to Better Boards
Elementary Mr. Watson: How to Reinvent Your Professional Journey
Conecsus Metals Mexico to Exhibit Waste Recycling Solutions at SMTA Querétaro Expo and Tech Forum
June 26, 2023 | Conecsus Metals MéxicoEstimated reading time: Less than a minute
Conecsus Metals México, an innovative environmental technology and recycling company, will exhibit at the SMTA Expo and Tech Forum in Queretaro, Mexico on July 13. The company recently exhibited at the SMTA Expo & Tech Forum in Aguascalientes, México, where Conecsus representatives Yessica Romero, Regional Sales Manager, and Carolina Renteria, Customer Services Manager, met with Conecsus customers, where they illustrated how the company processes wastes containing primarily Tin, Tin-Zinc, Lead, and Silver, and converts them into usable metal products, paying its customers back for their metals waste.
Conecsus is an ISO 14001 EMS certified recycling company and a refiner of SMT solder/solder paste wastes and residues.
The July 13, 2023 event, beginning at 8:00 a.m., will be held at the EXPO HALL Hotel Misión Juriquilla, Blvd. Villas del Mesón 56, Col. Juriquilla Querétaro, Querétaro 76230, Mexico.
With solder waste reprocessing facilities located in Terrell, TX, USA, Conecsus LLC is a sophisticated ‘green’ recycler and refiner of SMT solder/solder paste wastes and residues, as well as complex by-products that can be recovered from industries in North America and worldwide.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.