Beyond Design: Slaying Signal Integrity Villains
Elementary Mr. Watson: Running the Signal Gauntlet
The Shaughnessy Report: Winning the Signal Integrity Battle
Indium’s Wisdom Qu to Present at iNEMI Workshop on Automotive Electronics
October 2, 2023 | Indium CorporationEstimated reading time: 1 minute
Indium Corporation Regional Product Manager Wisdom Qu will present at the iNEMI Workshop on Automotive Electronics on October 13, in Shenzhen, China.
In her presentation Low-Voiding, High-Reliability, Lead-Free Solder Paste Design for Automotive Applications, Qu will examine the results of a test comparing a solder paste based on a mixed powder technology, containing Sn/Ag/Cu/Bi/Sb/In in the final joint, with SAC305 and other high-reliability pastes. The voiding from a QFN package was consistently lower than 15%, which is better than SAC305. TCT reliability under AEC Grade 1 for BGA192, QFN, and chip-resistor also demonstrated improved reliability compared to SAC305 and the other high-reliability alloys.
With the rapid growth of the 5G and EV markets, the electronics industry has higher requirements for product reliability, with the extended lifetime under AEC Grade 1 or even Grade 0 conditions. Traditional high-reliability solder alloys contain five or six elements or even more, which strengthens through solid solution and/or precipitate solution.
“The microstructural complexity of the multi-element high-reliability alloys makes the melting behavior complicated, which may lead to worsened voiding performance compared to traditional SAC305 after reflow,” said Qu. “Designing the solder paste with mixed powder technology can reduce voiding by using at least one ternary or quaternary alloy powder constituent in the paste while the final joint is still a quinary or even senary alloy system.”
As Regional Product Manager for PCB Assembly Solder Paste in Asia, Qu facilitates business development and growth of PCB assembly product offerings, focusing on solder paste. A certified SMT process engineer, she has more than 17 years of experience in surface mount technology and earned a degree in mathematics from Hubei Radio and Television University in China.
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
Knocking Down the Bone Pile: Best Practices for Electronic Component Salvaging
09/17/2025 | Nash Bell -- Column: Knocking Down the Bone PileElectronic component salvaging is the practice of recovering high-value devices from PCBs taken from obsolete or superseded electronic products. These components can be reused in new assemblies, reducing dependence on newly purchased parts that may be costly or subject to long lead times.
The Road to Reliability: Why EV Electronics Matter More Than Ever
09/16/2025 | Stanton Rak, SF Rak CompanyThe global transition to e-Mobility is redefining the design and reliability expectations of automotive electronics. Unlike their internal combustion engine (ICE) counterparts, EVs operate under "always-on" conditions and are subject to higher voltages, higher currents, and elevated thermal loads. These systems also incorporate exponentially more sensors, control units, and advanced power electronics, often tightly packed in thermally constrained spaces.
Koh Young, Fuji, and Kurtz ERSA Drive Smart Manufacturing Solutions for EV and Automotive Electronics at Kunshan, China Technical Seminar
09/11/2025 | Koh YoungKoh Young Technology, the global leader in True 3D measurement-based inspection solutions, partnered with Fuji Corporation and Kurtz ERSA to host an exclusive technical seminar for leading automotive manufacturers in East China. Held on September 4 at Fuji’s factory in Kunshan, the event gathered participants representing over 35 companies.
Indium Corporation to Highlight High-Reliability Solder Solutions at SMTA Guadalajara Expo
09/04/2025 | Indium CorporationIndium Corporation, a leading materials refiner, smelter, manufacturer, and supplier to the global electronics, semiconductor, thin-film, and thermal management markets, will feature a range of innovative, high-reliability solder products for printed circuit board assembly (PCBA) at the SMTA Guadalajara Expo and Tech Forum, to be held September 17-18 in Guadalajara, Mexico.
Indium to Highlight Energy-Efficient, High-Reliability Solder Solutions for EV and Electronics at Productronica India
09/03/2025 | Indium CorporationIndium Corporation, a leading materials refiner, smelter, manufacturer, and supplier to the global electronics, semiconductor, electric vehicle (EV), thin-film, and thermal management markets, will feature a range of sustainable, high-reliability solder products at Productronica India, to be held September 17-19 in Bengaluru, India.