Global Citizenship: What I’ve Learned About the American PCB Business
Global Sourcing Spotlight: The Best Products to Buy Offshore Through Global Sourcing
Nolan's Notes: The Rise (and Risk) of Data
MKS' Atotech: More Horizontal Panel Plating in the U.S.
October 11, 2023 | Christopher R. Daczkowski, MKS' AtotechEstimated reading time: 1 minute
Recently, Schweitzer Engineering Laboratories (SEL) opened its new $100 million captive printed circuit board manufacturing facility in Moscow, Idaho. The new facility features state-of-the-art PCB equipment from MKS’ Atotech, one of the leading providers of advanced PCB and IC substrate horizontal manufacturing equipment for the electronics industry. This type of equipment is normally delivered to Asian markets and is not usually seen in North America.
Equipment selection is a crucial decision for any company and directly impacts the quality and efficiency of production processes. For our customers, several key factors usually drive the decision to install MKS’ Atotech equipment lines. These include our long history as a reputable global solutions provider and proven record of successful installations worldwide. Today, we have delivered and installed more than 2,150 horizontal PCB lines for surface treatment, desmear and metallization, copper electroplating, and final finishing of printed circuit boards and IC substrates, of which more than 1,000 are horizontal copper platers. They are well known for their outstanding repeatability of copper deposition uniformity and pure copper plating results.
With the shift toward increased investment in local manufacturing in the U.S., our system solutions are appreciated as high-quality products to support manufacturing demand now and in the future. With our long history in the Americas, we are happy to see this development and are excited to provide the best possible technical support to our customer base, which is growing, especially with the trend of opening new, innovative PCB plants.
Follow this link to continue reading this article which appears in its entirety in the September 2023 issue of PCB007 Magazine.
Share on:
Suggested Items
Unlocking Advanced Circuitry Through Liquid Metal Ink
10/31/2024 | I-Connect007 Editorial TeamPCB UHDI technologist John Johnson of American Standard Circuits discusses the evolving landscape of electronics manufacturing and the critical role of innovation, specifically liquid metal ink technology, as an alternate process to traditional metallization in PCB fabrication to achieve ever finer features and tighter tolerances. The discussion highlights the benefits of reliability, efficiency, and yields as a tradeoff to any increased cost to run the process. As this technology becomes better understood and accepted, even sought out by customers and designers, John says there is a move toward mainstream incorporation.
Fresh PCB Concepts: The Critical Nature of Copper Thickness on PCBs
10/31/2024 | Team NCAB -- Column: Fresh PCB ConceptsPCBs are the backbone of modern electronics and the copper layers within these boards serve as the primary pathways for electrical signals. When designing and manufacturing PCBs, copper thickness is one of the most critical factors and significantly affects the board’s performance and durability. The IPC-6012F specification, the industry standard for the performance and qualification of rigid PCBs, sets clear guidelines on copper thickness to ensure reliability in different environments and applications.
Book Excerpt: The Printed Circuit Designer’s Guide to... DFM Essentials, Ch. 1
10/25/2024 | I-Connect007The guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter details high-frequency materials, copper foil types, metal core PCBs, and the benefits of embedded capacitance and resistor materials in multilayer PCBs.
The Cost-Benefit Analysis of Direct Metallization
10/21/2024 | Carmichael Gugliotti, MacDermid AlphaCarmichael Gugliotti of MacDermid Alpha discusses the innovative realm of direct metallization technology, its numerous applications, and significant advantages over traditional processes. Carmichael offers an in-depth look at how direct metallization, through developments such as Blackhole and Shadow, is revolutionizing PCB manufacturing by enhancing efficiency, sustainability, and cost-effectiveness. From its origins in the 1980s to its application in cutting-edge, high-density interconnects and its pivotal role in sustainability, this discussion sheds light on how direct metallization shapes the future of PCB manufacturing across various industries, including automotive, consumer electronics, and beyond.
Connect the Dots: Designing for Reality—Pattern Plating
10/16/2024 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we painted the picture of the outer layer imaging process. Now we are ready for pattern plating, where fabrication can get tricky. The board is now ready to receive the copper traces, pads, and other elements specified in the original CAD design. This article will lay out the pattern plating process and discuss constraints in the chemistries that must be properly managed to meet the customer's exacting manufacturing tolerances.