-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueSignal Integrity
If you don’t have signal integrity problems now, you will eventually. This month, our expert contributors share a variety of SI techniques that can help designers avoid ground bounce, crosstalk, parasitic issues, and much more.
Proper Floor Planning
Floor planning decisions can make or break performance, manufacturability, and timelines. This month’s contributors weigh in with their best practices for proper floor planning and specific strategies to get it right.
Showing Some Constraint
A strong design constraint strategy carefully balances a wide range of electrical and manufacturing trade-offs. This month, we explore the key requirements, common challenges, and best practices behind building an effective constraint strategy.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
EU Tariffs Act as Catalyst, Chinese Automakers to Accelerate Launch of 14 New Overseas Plants
July 9, 2024 | TrendForceEstimated reading time: 2 minutes
The EU has initiated provisional countervailing duties on Chinese-made BEVs as of July 4, 2024. While new tariff percentages have been announced, they show minimal change from the rates published on June 12. The tariffs include 17.4% for BYD, 19.9% for Geely, and 37.6% for SAIC. Additionally, automakers identified as cooperating with the investigation but not sampled will face a 20.8% tariff—affecting a total of 13 companies—while other automakers not listed will be subject to a 37.6% tariff.
TrendForce points out that the current EU tariff on Chinese vehicles is 10%. This means the tariff on BEVs exported from China will increase to between 27.4% and 47.6%. European and American automakers will also be affected. The investigation will continue until November 2, 2024, allowing time for negotiations between China and the EU, responses and independent review requests from stakeholders, and the influence of EU member states’ positions on final measures. Therefore, there is still room for discussion regarding the EU’s tariff position on Chinese BEVs.
TrendForce analysis reveals that the EU’s increased tariff will impact several aspects. One is the acceleration of overseas plant construction and supply chain layout by Chinese automakers. Another is that the EU’s measures target BEVs and exclude PHEVs. Chinese automakers have advantages in PHEV technology and costs, and offering PHEV models could be a viable option given the resurgence in PHEV demand in the European market.
TrendForce reveals that more than 14 overseas NEV factories/production lines by Chinese automakers will be operational between 2024 and 2026, primarily in Southeast Asia, Europe, and South America. BYD is the most proactive, having officially started production at its new Uzbekistan plant in June 2024 and is launching its Thailand plant on July 4, with additional plants under construction in Indonesia, Hungary, and Brazil.
Although not every overseas plant is aimed at the EU market, automakers with overseas facilities are relatively less affected. While tariffs may lead to reduced profits or increased prices, it is estimated that the pricing Chinese brands will remain competitive. The market share of Chinese brands (excluding Volvo) in the EU BEV market is expected to increase from 8.2% in 2023 to 10% in 2024. For automakers with smaller sales volumes in the EU market, the tariffs may prompt adjustments in overseas market strategies, including shifting target markets or changing approaches to the European market.
Furthermore, the decisions of the US and the EU will also impact other countries. Beyond international relations, the strategies adopted by companies in response to tariff barriers by these two regions could positively or negatively affect industries in other countries. Consequently, the influence of geopolitics on the automotive/EV sector continues to intensify, testing each automaker’s global layout and supply chain design.
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Breakthrough in Non-Contact Solder Removal Earns Kurtz Ersa 2025 Mexico Technology Award at SMTA Guadalajara
09/18/2025 | Kurtz Ersa Inc.Kurtz Ersa Inc., a leading supplier of electronics production equipment, is proud to announce that it has been awarded a 2025 Mexico Technology Award in the category of Rework & Repair for its HR 600P Automatic Rework System.
Knocking Down the Bone Pile: Best Practices for Electronic Component Salvaging
09/17/2025 | Nash Bell -- Column: Knocking Down the Bone PileElectronic component salvaging is the practice of recovering high-value devices from PCBs taken from obsolete or superseded electronic products. These components can be reused in new assemblies, reducing dependence on newly purchased parts that may be costly or subject to long lead times.
On the Line With… Podcast: UHDI and RF Performance
09/17/2025 | I-Connect007I-Connect007 is excited to announce the release of a new episode in its latest On the Line with... podcast series, which shines a spotlight on one of the most important emerging innovations in electronics manufacturing: Ultra-High-Density Interconnect (UHDI).
The Marketing Minute: Cracking the Code of Technical Marketing
09/17/2025 | Brittany Martin -- Column: The Marketing MinuteMarketing is never a one-size-fits-all endeavor, but the challenges are magnified for highly technical industries like electronics. Products and processes are complex, audiences are diverse, and the stakes are high, especially when your customers are engineers, decision-makers, and global partners who depend on your expertise.
EV Group Achieves Breakthrough in Hybrid Bonding Overlay Control for Chiplet Integration
09/12/2025 | EV GroupEV Group (EVG), a leading provider of innovative process solutions and expertise serving leading-edge and future semiconductor designs and chip integration schemes, today unveiled the EVG®40 D2W—the first dedicated die-to-wafer overlay metrology platform to deliver 100 percent die overlay measurement on 300-mm wafers at high precision and speeds needed for production environments. With up to 15X higher throughput than EVG’s industry benchmark EVG®40 NT2 system designed for hybrid wafer bonding metrology, the new EVG40 D2W enables chipmakers to verify die placement accuracy and take rapid corrective action, improving process control and yield in high-volume manufacturing (HVM).