-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueSilicon to Systems: From Soup to Nuts
This month, we asked our expert contributors to weigh in on silicon to systems—what it means to PCB designers and design engineers, EDA companies, and the rest of the PCB supply chain... from soup to nuts.
Cost Drivers
In this month’s issue of Design007 Magazine, our expert contributors explain the impact of cost drivers on PCB designs and the need to consider a design budget. They discuss the myriad design cycle cost adders—hidden and not so hidden—and ways to add value.
Mechatronics
Our expert contributors discuss the advent of mechatronics in PCB design, the challenges and opportunities this creates for circuit board designers, and the benefits—to the employee and the company—of becoming a mechatronics engineer.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Maximizing ROI Through Better Wet Process Control
August 20, 2024 | I-Connect007 Editorial TeamEstimated reading time: 2 minutes
Mike Carano is a program manager and SME for advanced packaging and PCB technologies at Trusted Semiconductor Solution. He has more than 40 years of experience in the electronics industry, with special expertise in manufacturing, performance chemicals, metals, semiconductors, medical devices, and advanced packaging.
For this issue, we reached out to Mike to learn more about how dialing in on wet process can benefit your bottom line.
“When things get out of control, the variation in your wet process begins,” Mike says. “Just because they look like good boards and may even pass electrical test, it does not necessarily mean you have good boards. Once the chemistry is headed toward the right or left side of the process control parameter cliff, the plating is compromised. If the copper is thinner than it should be, when the customer puts it into service, the board may fail after 500 cycles vs. the requisite 1,000 or 2,000 cycles. The root cause issue is that you plated 7/10ths of a mil of copper instead of one-mil of copper because you were not controlling your process. The fact that you passed your own electric test becomes inconsequential.”
What he’s really talking about is the need for a paradigm shift “where tight control of your processes is the way you manage your organization, wet process being one particular and crucial area of operations.”
With respect to process control, he tells his clients, “you have to stop thinking like a fabricator and think more like a semiconductor company.” Don't be solely reliant on your suppliers’ technical support to do the job either, he adds, because by then, it could be too late. “We all need to be laser-focused on precision. We need to be better at what we do. Perfection may not be attainable, but we should strive to get as close as we can. You achieve that through process control, which encompasses the critically essential skills of troubleshooting, root-cause analysis, problem-solving, and strategizing.
Marcy LaRont: Mike, PCB fabricators care about quality and yield because it ultimately translates to cost and profitability. Today, we also have sustainability goals and requirements. What should be the priorities in tightening up control?
Mike Carano: It has been frustrating over the years to witness the general lack of ability to troubleshoot and solve problems in some of the places I visit, which is why I write articles and present courses on advanced troubleshooting. I often see a “teeter-totter” mindset, this conundrum that you must sacrifice either quality or productivity and that somehow you can’t have both. Of course, the manufacturing folks err toward greater productivity, so you always have control over all your processes in real-time. Things will always go wrong. But when you simply rely on mass inspection, and don’t focus on process control, costs and rework go up, and productivity ultimately declines, all because of an imperfect system.
To read the rest of this article, which appeared in the August 2024 issue of PCB007 Magazine, click here.
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics, Chapter 4
09/11/2024 | I-Connect007 Editorial TeamIn this chapter, readers will learn the importance of efficiency in post-SMT processes such as rework and testing. Key KPIs are discussed, along with the need to reduce rework time, improve first-pass yield, maintain testers, and monitor defect rates. By optimizing these processes, manufacturers can enhance product quality, reduce costs associated with defects, and ensure customer satisfaction.
Beyond Design: Integrated Circuit to PCB Integration
09/11/2024 | Barry Olney -- Column: Beyond DesignTechnologies such as artificial intelligence, autonomous cars, smartphones, and wearable devices are significantly transforming the semiconductor industry. The miniaturization trend drives the IC footprint to an even smaller profile, requiring tighter margins. From the PCB designer’s perspective, smaller form factors are achievable, making devices more compact and lightweight. But double-sided SMT placement, reduced routing channels, and high-speed constraints create multiple challenges for designers. However, there are some advantages to miniaturization: shorter interconnects between the IC and the PCB reduce signal loss and electromagnetic interference. High-speed digital signals in the GHz range benefit from reduced parasitics.
Trouble in Your Tank: Things You Can Do for Better Wet Process Control
09/11/2024 | Michael Carano -- Column: Trouble in Your TankFor 40 years, I have been involved in the printed circuit board, circuit board assembly, and semiconductor technology segments, preaching about minimizing defects and improving yields. This is especially true as technology becomes increasingly complex, and additional focus must be placed on yield improvements. Process management and wet process control must be front and center, so it’s quite interesting and timely to talk about wet process control and management for this month’s issue. This theme fits quite well with today's global events. For this industry, the technical curve has steepened dramatically in the past few years.
Sondrel Announces Advanced Modelling Process for AI Chip Designs
09/10/2024 | SondrelSondrel, a leading provider of ultra-complex custom chips for leading global technology brands, has announced an Advanced Modelling Process for AI chip designs.
PCB Workshop and Plant Tour Hosted by the SMTA Wisconsin Chapter
09/09/2024 | SMTAThis half-day course will provide participants with a comprehensive understanding of the multi-layer PCB fabrication process. The workshop will explore how PCB design influences fabrication steps and how the finished product integrates into the assembly process.