Beyond Design: Slaying Signal Integrity Villains
Elementary Mr. Watson: Running the Signal Gauntlet
The Shaughnessy Report: Winning the Signal Integrity Battle
Building on DesignCon’s 30th Anniversary Momentum
February 4, 2025 | Marcy LaRont, I-Connect007Estimated reading time: 2 minutes
With three decades of technological advancements, DesignCon has established itself as a premier conference for electronics design. Susan Deffree, the group event coordinator, reflects on the event's rich history and the exciting developments for its 30th anniversary.
Marcy LaRont: Suzanne, tell me about the show's origin and how DesignCon has developed over the years. What's really exciting about this 30th year?
Suzanne Deffree: DesignCon started as a Hewlett Packard (HP) event focused on HP products and technologies and grew up through Hewlett Packard’s divisions and spin-offs. The HP group, which is now Keysight, contributed to a lot to DesignCon’s growth.
Originally, the show focused on interconnects, but it's grown to be everything that touches the chip on the board in any way. We've got semiconductors and microelectronics, we've got PCBs, and we've got interconnects—which are still very important. Test and measurement, of course, is also at that foundational level of every electronic device in our world—your iPhone, your refrigerator, your car, anything that's got electronics in it, starts at DesignCon.
LaRont: I just listened to the keynote speaker from NVIDIA, which was really interesting. What else did you plan for this year?
Deffree: We planned 15 conference tracks, our Chip Head Theater, and our daily keynotes. We've had panel discussions every afternoon and those were packed. We had one with over 200 people in it yesterday and that was amazing. We also had about 170 suppliers on the expo floor.
We also planned several events specifically to celebrate the 30th anniversary. We had a lounge on the expo floor where you could pick up an alumni ribbon to show off how long you've been affiliated with DesignCon. We also had a timeline on display showing the progress of 30 years of tech. It highlighted this chip or that testing technology. But then it also has bigger influences like the iPod or a space shuttle launch. Our tech is in those big events. Our tech made those advances possible. The engineers of DesignCon made all that possible.
We also did giveaways for the 30th anniversary, and had a fun scavenger hunt. We linked up with a few new partners; IEEE EMC had its Women In Engineering group on Thursday afternoon with three sessions, including a reception about career advancement. Everyone was invited; it wasn’t a women-only program.
LaRont: I attended some of the technical tracks today, and walked the show floor. It was very busy down there, and that’s great to see. What did you attendance numbers look like?
Deffree: I don't have official numbers, but I know we were up significantly in pre-registration and based on the floor attendance, it was a very good attendee year and a great experience, too.
LaRont: That's great. Congratulations on your 30th DesignCon event. Thank you for all you do.
Deffree: Marcy, it’s good to see you here. Thank you.
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
Curing and Verification in PCB Shadow Areas
09/17/2025 | Doug Katze, DymaxDesign engineers know a simple truth that often complicates electronics manufacturing: Light doesn’t go around corners. In densely populated PCBs, adhesives and coatings often fail to fully cure in shadowed regions created by tall ICs, connectors, relays, and tight housings.
Building Electronics Excellence in India
09/08/2025 | Nolan Johnson, SMT007 MagazineFor over two decades, Dave Bergman has helped steer the Global Electronics Association’s work in India, from a single training course to a thriving regional operation with deep government and industry ties. In this interview, Dave explains how the group went from partnering with IPCA to opening its own office in 2010, creating India’s first domestic electronics manufacturing standard, and securing funding for dozens of Indian companies to attend U.S. trade shows.
It’s Only Common Sense: 20 Lessons in 20 Years—A Career in Common Sense
08/25/2025 | Dan Beaulieu -- Column: It's Only Common SenseIt’s been 20 years and 1,000 columns since I published my first monthly edition called “It’s Only Common Sense” on Sept. 5, 2005. I had only written 10 columns when I realized I couldn’t be confined to once a month. I simply had too much to say. So, on July 31, 2006, I started writing once a week, and let me tell you, that’s a lot of Mondays spent thinking, listening, watching, and writing about this wild, brutal, and beautiful industry we call the printed circuit board business.
Survey Says Reshoring is a TCO Equation
08/13/2025 | Nolan Johnson, SMT007 MagazineHarry Moser, founder of the Reshoring Initiative, and Kathy Nunnally of Regions Recruiting partnered to survey contract manufacturers and OEMs earlier this year, querying them about their offshoring beliefs and practices. They found that while offshoring, tariffs, trade balances, and the like, are important to a company’s bottom line, there’s a larger and more extensive issue: workforce. In this interview, they detail the results of that survey and what they believe can and should be done to fix this long-standing issue.
Akrometrix Announces 30 Year Anniversary as Industry Leader in Thermal Warpage Metrology
02/25/2025 | Akrometrix LLCAkrometrix is celebrating their 30 year anniversary as an industry leader in thermal warpage metrology. Professor Ifeanyi Charles Ume founded Akrometrix out of Georgia Tech 30 years ago to address issues in PCB flatness using the shadow moiré warpage measurement technique.