The Shaughnessy Report: Always With the Negative Waves
Connect the Dots: Stop Killing Your Yield—The Hidden Cost of Design Oversights
Global PCB Connections: A Field Engineer’s Perspective on the Top 10 Trends to Watch
Gold as a Key Component in PCBs and IC Substrates
March 20, 2025 | Britta Schafsteller, Sandra Nelle, and Kuldip Johal, MKS' AtotechEstimated reading time: 1 minute
Gold has long been a cornerstone in the electronics industry, particularly in the surface finishing of PCBs and IC substrates. It provides essential surface protection while enabling various assembling techniques, such as soldering connections and wire bonding, using aluminum, gold, or copper wires. Gold plating is a critical step in several finish systems, including electroless nickel/immersion gold (ENIG), electroless nickel/electroless palladium/immersion gold (ENEPIG), and electroless palladium/autocatalytic gold (EPAG). These finishes are valued for their solderability and wire-bondability, with ENEPIG and EPAG offering enhanced solder joint reliability and gold-wire bondability.
This article explores different types of electroless gold plating electrolytes, their plating mechanisms, and their properties and capabilities. We further connect the characteristics of gold to some key challenges of the electronics industry, such as high frequency, signal integrity, and fine feature demands.
The Role of Gold-containing Final Finishes
In the realm of electronics, final finishes play a crucial role. They provide a protective layer on electronic components, preventing oxidation and corrosion that could lead to failures. Without these finishes, the reliability and longevity of electronic devices would be significantly compromised. Final finishes also enhance solderability, ensuring strong and stable connections between components, which is essential for the overall functionality of the device. In summary, final finishes are essential for:
- Protection: Safeguarding components from environmental damage
- Solderability: Ensuring secure and stable connections
- Reliability: Extending the lifespan of electronic devices
The perennial question always will be: Which finish is best for which application? In the dynamic world of electronics manufacturing, the choice of finish is far from trivial—each type has its distinct advantages tailored to specific applications.
Continue reading this article in the March 2025 issue of PCB007 Magazine.
Share on:
Suggested Items
Observations on Palladium as a Final Finish
04/04/2025 | Happy Holden, I-Connect007Not much has been published about palladium as a final finish, but it’s experiencing a renaissance as a liquid metal for metallization of copper in ultra HDI and as a final finish. It was very popular in the 1970s because of its corrosion resistance, as the only other final finishes were tin-lead reflow, Ni/Au, OSP, or immersion tin. Palladium was very popular with the automotive industry then and Photocircuits of Glen Cove, New York, was a major supplier of boards.
Uyemura Announces Six Sigma Graduates
04/02/2025 | UyemuraDr. Patrick Valentine, Technical & Lean Six Sigma Manager and Six Sigma Master Black Belt, announces the completion of Lean Six Sigma Black Belt training by 4 members of Uyemura’s professional staff.
SAMI-AEC Earns Gold Membership Under “Made in Saudi” Program
03/19/2025 | SAMISAMI Advanced Electronics Company (SAMI-AEC) proudly announces its elevation to the prestigious Gold Category within the “Made in Saudi” program.
PCB007 Magazine: The Essential Guide to Surface Finishes—March 2025
03/17/2025 | I-Connect007 Editorial TeamIn the March 2025 issue of PCB007 Magazine, we go back to basics, recount a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore.
ICT Spring Seminar: Nickel Not Welcome Here
03/12/2025 | Pete Starkey, I-Connect007After a miserable, dull, and damp English winter, a really pleasant nearly spring day with the sun shining and daffodils in bloom greeted delegates to the Institute of Circuit Technology Spring Seminar at Puckrup Hall near Tewkesbury, March 5, in Gloucestershire, UK.