Global Sourcing Spotlight: Finding the Balance Between Cost and Quality
Knocking Down the Bone Pile: Best Practices for Electronic Component Salvaging
Global Citizenship: Together for a Perfect PCB Solution
Machvision Leads Shift to Automated Inline Final Inspection, AOI in North America
September 10, 2025 | Ralph Jacobo, all4-PCBEstimated reading time: 2 minutes
Editor's note: This article appeared in the August 2025 PCB007 Magazine as part of our spotlight on Schweitzer Engineering Laboratories.
Schweitzer Engineering Laboratories (SEL) chose Machvision inspection equipment due to its capabilities and versatility. Machvision of Taiwan offers circuit inspection, hole inspection and measurement, IC Substrate and HDI inspection, and final visual inspection solutions.
The best fit for SEL was the 4.0Pro Circuit Inspection for inner and outer layers, and the AFI6 for final visual inspection of finished panels.
The 4.0Pro allows for rapid changeover between recipes and detection of copper defects as small as 0.0025" (0.0635 mm). It identifies shorts, opens, nicks, protrusions, pinholes, line width violations, spacing issues, pad size deviations, SMT violations, and drill errors. It processes a wide panel thickness range from 0.05 mm to 3.2 mm (0.002" to 0.110"), with SEL using it mainly for inner and outer layers. Inspection programs are downloaded “on the fly” after panel identification. The system supports existing verification stations and provides high-resolution color images.
The AFI6 performs automated final inspection (AFVI) prior to packaging and shipment. It detects cosmetic and functional defects such as gold/copper discoloration, scratches, abnormal feature sizes, drill voids, solder mask or metal peeling, foreign objects, missing legends, and blurred markings. It works with setup and repair stations to improve throughput and consistency. Like the 4.0Pro, the AFI6 can download inspection programs dynamically per panel ID.
Importantly, AFVI brings major advantages over traditional manual final inspection.
Final inspection has long been a bottleneck in PCB production, with manufacturers often relying on experienced inspectors to visually verify finished boards under magnification. This role is not only repetitive and fatiguing but increasingly complex to staff because of labor shortages and high turnover. Hiring and training skilled inspectors is time-consuming, and visual quality can vary between operators, leading to inconsistencies.
AFVI solutions like Machvision’s AFI6 address these challenges by standardizing defect detection, maintaining consistent quality standards, and significantly reducing inspection times. The system does not tire or lose focus over time, allowing 24/7 operation with predictable output. It also generates digital inspection records, supporting traceability and quality audits.
The AFI6 system was configured for manual loading at SEL, with an option to upgrade to conveyorized or automated loading in the future, supporting scalable automation. The 4.0Pro was configured with conveyors and has been integrated with automated loading.
To see all of our SEL coverage, be sure to check out the August 2025 edition of PCB007 Magazine.
Share on:
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Arc-Tronics Strengthens Inspection Capabilities with Three New Saki AOI Systems
09/26/2025 | Saki America,Saki America, Inc., an innovator in the field of automated optical and X-ray inspection equipment, is pleased to announce that Arc-Tronics, Inc., a high-reliability EMS provider based in Elk Grove Village, Illinois, has recently installed three 3Di-LS3 Series Automated Optical Inspection (AOI) systems in its production facility.
Discover TRI's AI Ecosystem at productronica 2025
09/25/2025 | TRITest Research, Inc. (TRI), the leading test and inspection systems provider for the electronics manufacturing industry, is excited to announce its participation at productronica 2025, which will be held at Messe München Center from November 18 to 21, 2025.
Koh Young, Fuji, and Kurtz ERSA Drive Smart Manufacturing Solutions for EV and Automotive Electronics at Kunshan, China Technical Seminar
09/25/2025 | Koh YoungKoh Young Technology, the global leader in True 3D measurement-based inspection solutions, partnered with Fuji Corporation and Kurtz ERSA to host an exclusive technical seminar for leading automotive manufacturers in East China.
Volatus Aerospace Secures Major Multi-Year Agreement with a Leading North American Power Utility to Provide Drone-Based Services
09/16/2025 | Globe NewswireVolatus Aerospace Inc., is pleased to announce that it has entered into a multi-year agreement with one of North America’s largest electricity transmission and distribution utilities. Under the agreement, Volatus has been selected to provide remotely piloted aircraft system (RPAS) inspection, mapping, and data services across an extensive network of approx. 100,000 miles of transmission and distribution lines.
TRI Technology Collaboration with ITRI highlighted at SEMICON Taiwan
09/16/2025 | TRITest Research, Inc. joined the Ministry of Economic Affairs (MOEA) Pavilion at SEMICON Taiwan 2025, where its collaborative technology with the Industrial Technology Research Institute (ITRI) was recognized as a key innovation.