-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueSignal Integrity
If you don’t have signal integrity problems now, you will eventually. This month, our expert contributors share a variety of SI techniques that can help designers avoid ground bounce, crosstalk, parasitic issues, and much more.
Proper Floor Planning
Floor planning decisions can make or break performance, manufacturability, and timelines. This month’s contributors weigh in with their best practices for proper floor planning and specific strategies to get it right.
Showing Some Constraint
A strong design constraint strategy carefully balances a wide range of electrical and manufacturing trade-offs. This month, we explore the key requirements, common challenges, and best practices behind building an effective constraint strategy.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
A Conversation (and Day) with Joe Fjelstad, Part 1
May 3, 2015 | Barry Matties, I-Connect007Estimated reading time: 7 minutes
So presently, if you want to build military product, you choose a component that you want with the knowledge that it's going to come with a lead-free termination. Using a BGA as an example to track what happens to that component thermally, you find that it goes through one high-temp thermal excursion to put the balls on the BGA and another high-temp thermal excursion to remove them; then there is yet another thermal excursion to replace the lead-free balls with tin lead solder balls, a fourth thermal excursion when you mount the device to the printed circuit, a fifth excursion if the board requires two-sided assembly and potentially a sixth excursion if rework or repair is required on the device.
So you have multiple excursions at high temperature, and as the reliability experts continue to tell us, there's an inverse relationship between long-term reliability and thermal excursions. This is insane and yet we as an industry are saddled with this problem, all because of what? Perhaps, if one follows the money and looks for the greatest beneficiary, the tin industry looks extremely prominent. It is my understanding that the tin industry advised or perhaps lobbied the EU Parliament suggesting that there were lead-free solutions that were drop-in replacements ready to go. ‘Got the perfect solution for you; all you have to do is buy it.’ Sadly, it appears it was largely about money, politics and business as usual.
While they often nod at each other from across the street, politics and morality are not necessarily bedfellows. More often they don't line up with each other. In that regard, it's another sad fact that war is incredibly profitable. As a Vietnam veteran, when I listen to the arguments relative to matters of defense that are ongoing in the media on a regular basis, I find myself very disheartened. The present Congress doesn't want to stop spending on defense but they're more than willing to stop spending on education, infrastructure and other things that matter very much to the future of the nation. I find that unbelievably mind-numbing. I'm not going to live forever, but I worry for those of future generations who will have to deal with the legacy of this one.
One nice thing about getting older is summed up in a quote from the Swedish film director, Ingmar Bergman: "Growing old is a lot like climbing a mountain. The higher on the mountain you get, the more tired and breathless you become. But the views, the perspective, become much more extensive." To which I would add, and well worth the effort. You have a much better comprehension of what you see happening when you get to look back through the prism of time. I'm looking at these younger players now like Ted Cruz, and I sense this guy hasn't got a clue. I'm not saying he's not smart or that he hasn't read and doesn't understand the U.S. Constitution, even though he might be a bit off in his interpretation, in my opinion. What he lacks is the perspective of age and it seems a good deal of common sense—although, intelligence and common sense are not necessarily lined up, either. In fact, somebody said, “Common sense isn't all that common.” Fortunately, I don't think he'll make the cut. His personality is just too abrasive and his ego much too great.
Matties: That remains to be seen of course, but I definitely think you are on to something.
Next: Part 2—The Future of Electronics, the Role of Software and (gasp) Liberalism vs. Conservatism!
Page 2 of 2Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
Koh Young, Fuji, and Kurtz ERSA Drive Smart Manufacturing Solutions for EV and Automotive Electronics at Kunshan, China Technical Seminar
09/11/2025 | Koh YoungKoh Young Technology, the global leader in True 3D measurement-based inspection solutions, partnered with Fuji Corporation and Kurtz ERSA to host an exclusive technical seminar for leading automotive manufacturers in East China. Held on September 4 at Fuji’s factory in Kunshan, the event gathered participants representing over 35 companies.
MacDermid Alpha Presents at SMTA New Delhi, Bangalore Chapter, on Flux–OSP Interaction
09/09/2025 | MacDermid Alpha Electronics SolutionsMacDermid Alpha contributes technical insights on OSP solderability at the Bangalore Chapter, SMTA reinforcing commitment to knowledge-sharing and industry collaboration.
Electra’s ElectraJet EMJ110 Inkjet Soldermask Now in Black & Blue at Sunrise Electronics
09/08/2025 | Electra Polymers LtdFollowing the successful deployment of Electra’s Green EMJ110 Inkjet Soldermask on KLA’s Orbotech Neos™ platform at Sunrise Electronics in Elk Grove Village, Illinois, production has now moved beyond green.
Absolute EMS: The Science of the Perfect Solder Joint
09/05/2025 | Absolute EMS, Inc.Absolute EMS, Inc., a six-time award-winning provider of fast turnaround, turnkey contract electronic manufacturing services (EMS), is drawing attention to the critical role of 3D Solder Paste Inspection (SPI) in ensuring the reliability of both FLEX and rigid printed circuit board assemblies (PCBAs).
Indium Corporation to Highlight High-Reliability Solder Solutions at SMTA Guadalajara Expo
09/04/2025 | Indium CorporationIndium Corporation, a leading materials refiner, smelter, manufacturer, and supplier to the global electronics, semiconductor, thin-film, and thermal management markets, will feature a range of innovative, high-reliability solder products for printed circuit board assembly (PCBA) at the SMTA Guadalajara Expo and Tech Forum, to be held September 17-18 in Guadalajara, Mexico.