-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueSignal Integrity
If you don’t have signal integrity problems now, you will eventually. This month, our expert contributors share a variety of SI techniques that can help designers avoid ground bounce, crosstalk, parasitic issues, and much more.
Proper Floor Planning
Floor planning decisions can make or break performance, manufacturability, and timelines. This month’s contributors weigh in with their best practices for proper floor planning and specific strategies to get it right.
Showing Some Constraint
A strong design constraint strategy carefully balances a wide range of electrical and manufacturing trade-offs. This month, we explore the key requirements, common challenges, and best practices behind building an effective constraint strategy.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
Training the Next-Generation Engineer: When Does it Begin and End?
August 24, 2015 | Tom O'Connor, DfR SolutionsEstimated reading time: 2 minutes

American engineering companies are seeing a severe shortage of the homegrown engineers required to compete globally. Just go into any company today and you’ll notice that increasingly, the engineers are foreign-born. Our local universities are seeing fewer and fewer American engineering students each year. Universities are also seeing a growth in female students. Over 50% of college student are now female, and women traditionally are not attracted to science and engineering majors.
What is causing this imbalance? Why is the U.S. unable to train as many engineers as it needs? How is the U.S. going to fill its engineering requirements? Today, the answer is importing engineers who have an education and an H-1B visa. But is this a long-term answer? Probably not. As foreign countries catch up with the U.S. in technical capability and manufacturing abilities, these engineers will want to stay home as the pay in their home countries increases. Any of those who did come here to work will be able to bring their experiences home to help speed this transformation.
Another way companies avoided filling their engineering need was by offshoring, first with the manufacturing and then the engineering functions. This created hollow companies that are devoid of manufacturing and engineering. These companies are controlled by marketing and accounting staff, with just a few manufacturing engineers whose only function is to interface with the offshore contractors. This model works very well for high-volume, low-risk consumer product companies, whose goal is to make the products as cheaply as possible with just the right amount of functionality. The communications between OEM and contractor is not the critical item in these cases; cost is the critical factor. More and more companies are finding that all products do not meet this definition and foreign, low-cost suppliers are not always the right answer to their design and manufacturing needs.
Today, we are reading more and more about onshoring products. Companies may not be starting their own manufacturing facilities, but they are keeping their cost low by using North American contractors. They are weighing the cost of doing business due to longer logistics lines that cross multiple time zones and languages. Many of these companies are bringing the design and manufacturing back in house. One company that recently announced this move is General Motors. Earlier this year, GM announced that they would be closing some of their design centers in Asia, and the company is now planning to rebuild that capability in Michigan. Many have speculated that this move was brought on by all of GM’s recalls. GM cannot afford any more bad publicity.
One avionics company set up a R&D center in Asia to cut engineering costs. They now are seeing higher costs because of poor quality work and the need to redo many designs. Their customers are now starting to feel the difference and the supplier is now wondering if the move was correct and is bringing more critical work back to the US.
How can the engineering community attract good young engineers? It starts at the K-12 level. Scientists, technologists, engineers and mathematicians (STEM) need to be seen as the cool kids once again. (I’m showing my age now.)
To read this entire article, which appeared in the August 2015 issue of The PCB Design Magazine, click here.
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Meet the Author Podcast: Martyn Gaudion Unpacks the Secrets of High-Speed PCB Design
07/16/2025 | I-Connect007In this special Meet the Author episode of the On the Line with… podcast, Nolan Johnson sits down with Martyn Gaudion, signal integrity expert, managing director of Polar Instruments, and three-time author in I-Connect007’s popular The Printed Circuit Designer’s Guide to... series.
Intervala Hosts Employee Car and Motorcycle Show, Benefit Nonprofits
08/27/2024 | IntervalaIntervala hosted an employee car and motorcycle show, aptly named the Vala-Cruise and it was a roaring success! Employees had the chance to show off their prized wheels, and it was incredible to see the variety and passion on display.
KIC Honored with IPC Recognition for 25 Years of Membership and Contributions to Electronics Manufacturing Industry
06/24/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, is proud to announce that it has been recognized by IPC for 25 years of membership and significant contributions to electronics manufacturing.
Boeing Starliner Spacecraft Completes Successful Crewed Docking with International Space Station
06/07/2024 | BoeingNASA astronauts Barry "Butch" Wilmore and Sunita "Suni" Williams successfully docked Boeing's Starliner spacecraft to the International Space Station (ISS), about 26 hours after launching from Cape Canaveral Space Force Station.
KIC’s Miles Moreau to Present Profiling Basics and Best Practices at SMTA Wisconsin Chapter PCBA Profile Workshop
01/25/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, announces that Miles Moreau, General Manager, will be a featured speaker at the SMTA Wisconsin Chapter In-Person PCBA Profile Workshop.