-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssuePartial HDI
Our expert contributors provide a complete, detailed view of partial HDI this month. Most experienced PCB designers can start using this approach right away, but you need to know these tips, tricks and techniques first.
Silicon to Systems: From Soup to Nuts
This month, we asked our expert contributors to weigh in on silicon to systems—what it means to PCB designers and design engineers, EDA companies, and the rest of the PCB supply chain... from soup to nuts.
Cost Drivers
In this month’s issue of Design007 Magazine, our expert contributors explain the impact of cost drivers on PCB designs and the need to consider a design budget. They discuss the myriad design cycle cost adders—hidden and not so hidden—and ways to add value.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
ARC Technologies Exhibiting at Design Con 2016
January 21, 2016 | ARC TechnologiesEstimated reading time: 2 minutes
ARC Technologies is showcasing its wide range of capabilities to solve microwave and RF interference, radar absorbing, and EMI control challenges at 2016 Design Con (www.designcon.com) in Santa Clara, CA.
Learn more about ARC Technologies new testing capabilities and solutions, including their newest Hot Melt Absorbers, Focused Beam Testing system providing electromagnetic test capabilities up to 110 GHz, the ARC Clear Conductive Electromagnetic Shielding AC2ES™, and the latest automotive anti-collision radar materials.
The latest Hot Melt Absorber product line gives the customer a very simple and fast way to apply absorber to a surface that requires noise suppression, for example a PCB. Different hot melt products are available depending on application and frequency requirement.
The AC2ES is an advanced, optically clear, transparent, thin-film conductor that provides excellent EMI shielding and conductivity. It is a robust, ultra-thin, flexible film incorporating conductive nanoparticles and a low-cost direct replacement for Indium Tin Oxide (ITO) films. AC2ES is available in flat or 3D form, or can be supplied pre-cut to exact customers’ specifications.
Addressing automotive radar designers and autonomous vehicle technology needs for accuracy and reliability, ARC Technologies has perfected a family of optimal RF noise mitigation materials. These materials can be formulated, molded or otherwise fabricated to best suit the application. ARC Technologies can help get technology up to speed with new radar absorber products SB1009, SB1006, and MC1000. Its SB and MC series absorbers are weather and chemical resistant and are suitable for use on the vehicle body, bumpers and other exterior surfaces.
ARC provides material testing and qualification services to many ASTM and MIL standards. It offers electromagnetic test capabilities up to 110 GHz with the addition of a focused beam system. Measuring a material’s permittivity (ε) and permeability (μ) is critical in the design and development of high frequency materials and systems. The ARC Technologies Inc. focused beam system allows for non-destructive, accurate measurements of these material parameters, including reflection and transmission loss, from 2-40 GHz and 75-110 GHz. The testing service provides customers a more affordable and fast way to turn around their testing needs.
Page 1 of 2
Suggested Items
Robots in Logistics Boom Worldwide
10/31/2024 | BUSINESS WIREThe demand for robots for transport and logistics is increasing: Almost 113,000 robots were sold for transport and logistics tasks in 2023 – up 35%. These results are published by VDMA Materials Handling and Intralogistics Association in cooperation with the IFR.
Machine Learning Can Predict the Mechanical Properties of Polymers
10/30/2024 | ACN NewswirePolymers such as polypropylene are fundamental materials in the modern world, found in everything from computers to cars. Because of their ubiquity, it’s vital that materials scientists know exactly how each newly developed polymer will perform under different preparation conditions.
DELO Introduces UV-approach for Fan-out Wafer-level Packaging
10/25/2024 | DELODELO has developed a new approach for fan-out wafer-level packaging (FOWLP). Its feasibility study shows: With the use of UV-curable molding materials instead of heat curing ones, warpage and die shift can be reduced significantly. Additionally, this leads to improvements in curing time and minimizes the energy consumption.
Book Excerpt: The Printed Circuit Designer’s Guide to... DFM Essentials, Ch. 1
10/25/2024 | I-Connect007The guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter details high-frequency materials, copper foil types, metal core PCBs, and the benefits of embedded capacitance and resistor materials in multilayer PCBs.
Global PCB Connections: Mission Critical—Communication Between PCB Designers and Fabricators
10/24/2024 | Jerome Larez -- Column: Global PCB ConnectionsIn my first column, I want to discuss the critical importance of communications between the PCB design and the PCB fabrication engineer. I’ll explore why clear communication is so important, highlight the differences between standard and CTQ items, and outline the key issues that must be agreed upon to achieve success in PCB manufacturing.