-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueDon’t Just Survive, Thrive
If we are to be relevant and prosper during these next critical decades in electronics, we must do more than survive. As an industry, we can and must thrive. In this issue, our contributors explore these concepts meant to help you take your business to the next level.
Material Matters
Materials management is nuanced, multifaceted, and requires a holistic systems approach for business success. When building high mix, low volume, and high technology, managing materials and overall cost containment are even greater challenges.
Additive Manufacturing
In this month’s issue, we explore additive manufacturing technology for the PCB fabricator: where it stands today, the true benefits, and where it seems to be headed.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Estimated reading time: 1 minute
![](https://iconnect007.com/application/files/1516/3116/7464/tara_dunn250.jpg)
Flex Talk: Flex Material Handling—An Inside Peek
As increasingly more designs move to flexible materials to take advantage of space, weight or packaging benefits, it has been clear that flexible circuits require a different set of rules than their rigid counterparts. We spend substantial time working through the design to ensure that he flex is as robust as possible. We also spend quite a bit of time on material selection, again to ensure that the flexible circuit withstands the flexing that will be required and performs properly in the end environment.
One thing we do not often talk about is what happens behind the scenes during the fabrication and assembly of the flexible circuit. What types of special handling considerations are in place throughout the manufacturing process to accommodate these thin materials? When you are auditing a potential new supplier, what should you be asking about and looking for in their procedures?
Undoubtedly, the largest source of defects in flexible circuit manufacturing can be traced back to material handling. Drawing from my own knowledge and soliciting the expertise of several industry veterans involved in flex circuit manufacturing—David Moody with Lenthor Engineering, Anaya Vardya with American Standard Circuits, Jim Barry with Eltek, and Mike Vinson with Averatek—I have put together an insider’s view of the nuances involved in manufacturing flexible circuits.
To read the full version of this article which appeared in the March 2017 issue of The PCB Magazine, click here.
More Columns from PCB Talk
PCB Talk: Is DWM Just Another Buzzword?PCB Talk: Burning Questions About Designing for SAP
PCB Talk: SAP—Changing the Way You Look at PCB Design
PCB Talk: SAP Evaluating From Design Perspective
PCB Talk: Creative Minds Pushing Boundaries
PCB Talk: Additive Electronics—Are You One of the Curious?
PCB Talk: Collaboration To Shorten the Learning Curve
PCB Talk: A Review of Additive Electronics