Happy’s Tech Talk #38: Novel Metallization for UHDI
It’s Only Common Sense Mastering the Follow-Up—The Key to Closing More Deals
Driving Innovation: Registration in PCB Production Throughout the Process
BGA Fanout Routing Overview
September 4, 2018 | Christian Keller, AltiumEstimated reading time: 1 minute
PCB developers are deluged with new challenges caused by increasing density and smaller components. Ball grid arrays (BGAs) create particular challenges during layout, with hundreds of connections in just a few square centimeters. Fortunately, designers now have options for addressing these issues.
Fanout and Escape Routing
Because of the density and distance from the connection points, only the two outermost rows of a BGA can be connected directly to surface circuit traces. All other terminals of the BGA cannot be connected in a direct path on the surface.
Fanout and escape routing is integrated in many PCB design systems to enable further connections. In fanout and escape routing, the two outermost rows, and all other rows of a BGA, are automatically connected to the center of the terminals via a short circuit trace that is executed at a 45° angle. This provides a blind via that forms a direct connection to the next signal layer. Routing can be executed on the next signal layer.
Using via-in-pad eliminates the need for the additional trace to the center of the connections, thereby creating additional space for circuit traces. Therefore, with via-in-pad, the through contact can be placed directly at the terminal of the BGA.
During circuit board manufacturing, these through contacts will be filled with a non-conducting medium and cured. Later, the ends are metallized, planarized, and also over-contacted. This makes the surface of the via flat and can be used the contacts of the BGA. This solution can be used for both stacked and staggered microvias and/or blind vias. IPC-4761 describes how via-in-pads, for example filled and capped vias (IPC-4761 Type VII), are prepared. Despite the higher manufacturing costs, via in pads will always be preferred, because of the higher integration density of BGAs and their lower inductance at high frequencies (signal quality).
To read this entire article, which appeared in the August 2018 issue of Design007 Magazine, click here.
Share on:
Suggested Items
Navigating Global Manufacturing in an Era of Uncertainty
05/07/2025 | Philip Stoten, ScoopThe EMS industry faces unprecedented challenges as global trade tensions rise and tariff announcements create market uncertainty. In an overview of IPC Europe’s podcast, MADE IN EUROPE, industry experts from GPV and Zollner examine how these developments impact our businesses and customers, and what strategies will prevail in this new landscape.
Nick Koop Launches IPC Flex Design Class
05/06/2025 | Andy Shaughnessy, Design007 MagazineNick Koop is director of flex technology for TTM Technologies, and he’s been a staple of IPC’s flex committees for decades. He’s also a longtime flex design instructor, and he’s about to debut a new IPC class, Flex and Rigid-Flex Design for Manufacturability, which will run May 12–21. In this interview, Nick tells us about this new class and what attendees can expect to learn.
The Government Circuit: Trump’s Trade War Disrupts the Electronics Ecosystem
05/06/2025 | Chris Mitchell -- Column: The Government CircuitThere is certainly no shortage of work to be done in the IPC Government Relations department, as the U.S. waged a tariff campaign on practically every industrial country in the world and several countries embarked on high-tech initiatives with a mix of approaches to the crucial foundations of electronics manufacturing. Indeed, the breadth and speed of U.S. President Donald Trump’s tariff campaign continues to be a serious challenge for our industry.
Meet Thiago Guimaraes, IPC's New Director of Industry Intelligence
05/05/2025 | Chris Mitchell, IPC VP, Global Government RelationsThe fast pace of innovation in the electronics manufacturing industry means business owners must continuously adapt their processes and capabilities to meet changing customer demands and market trends. To that end, IPC has hired Thiago Guimaraes as the new director of Industry Intelligence. In this interview, Thiago shares key goals and objectives that could revolutionize the industry as he helps stakeholders navigate industry trends and challenges.
Nolan's Notes: The Next Killer App in Component Manufacturing
05/02/2025 | Nolan Johnson -- Column: Nolan's NotesFor quite a while, I’ve been wondering what the next “killer app” will be in electronics manufacturing and why it has been so long since the last disruptive change in EMS. I believe the answer lies in artificial intelligence, which has exploded as the next disruptor.