-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueAdvanced Packaging and Stackup Design
This month, our expert contributors discuss the impact of advanced packaging on stackup design—from SI and DFM challenges through the variety of material tradeoffs that designers must contend with in HDI and UHDI.
Rules of Thumb
This month, we delve into rules of thumb—which ones work, which ones should be avoided. Rules of thumb are everywhere, but there may be hundreds of rules of thumb for PCB design. How do we separate the wheat from the chaff, so to speak?
Partial HDI
Our expert contributors provide a complete, detailed view of partial HDI this month. Most experienced PCB designers can start using this approach right away, but you need to know these tips, tricks and techniques first.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
AltiumLive 2022 - Vince Mazur’s Supply Chain Advice: Always Have Alternatives
April 11, 2022 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 6 minutes
I had the chance to speak with Vince Mazur, a technical marketing engineer at Altium, about his AltiumLive presentation, “Avoiding Supply Chain Issues with Variants and Live Part Choices,” which is now available online. Vince discussed some of the high points of his talk, including the need for designers to pay closer attention to the supply chain than ever before, and to always have an alternative part or two as backup—just in case.
Andy Shaughnessy: How are you, Vince? Long time, no see.
Vince Mazur: Hi, Andy. I’m doing well.
Shaughnessy: Why don’t you start off by telling us about your AltiumLive presentation?
Mazur: I’ll quickly say that a variant is a variation of a design, not to be confused with the COVID variants that we keep hearing about these days. First, I reviewed electronic part supply chain fundamentals. For some of the audience, this might be new. Next, I talked about product change notices and product discontinuance notices. I then talked about some of the environmental compliance issues, the differences between, say, a manufacturer part number and a supplier part number—just some fundamentals that might fill in the gaps for designers.
Then, I transitioned into more of a pre-layout design type of strategy by discussing how design architecture impacts the ability to source components. I offered some tips that can insulate designs from sourcing issues from the start. I moved into a finer grain level of abstraction, if you will, and spoke about some of the things that you can do early, such as planning for critical blocks and components.
Again, if you know you’re going to have a challenge or you know you’re exposed, and you’ve only got one source for a part that’s absolutely key for your design, you’re just going to be in a bind. And, by the way, designers were exposed to these challenges 10 years ago. Nothing has changed in this area, except for today’s increased probability of downside risk. I outlined some of the ways that you can avoid these challenges.
I also discussed tactics and tips on addressing today’s part sourcing challenges in designs that are either ready to go to manufacturing, or are already in manufacturing. I demonstrated how the Altium tools’ capabilities assist in overcoming these headaches.
Shaughnessy: Basically, designers have to get their supply chain issues straight early in the process, so that they’re not surprised at the last minute.
Mazur: Absolutely! There are so many different quotes along these lines. “Failure to plan is planning to fail,” comes to mind. If you know you’re going into the mountains in the depths of winter, you have to have some preparation. If you know that you’re going into a tough supply chain environment, and that supply chains are being impacted not just because of the current dilemma, but because of issues that started several years ago, designers will need to plan. We’ve got more people doing electronics design than ever in the history of engineering. They all need parts. And, I can say, as somebody who is very familiar with the small electronics OEM that my wife runs, we have been bumped on some of the parts unbelievably.
What I’ve found is that when you order parts, you don’t pick a number like you do at the meat counter. When that number comes up, you’re not guaranteed. They’re bumping us likely because there are bigger accounts that need those parts, you’ve got to be really careful how you design right now. And literally there is an opportunity for companies that do it right to gain a competitive advantage, in that they’re able to deliver their product in volume where their competition, who may even have a slightly better feature set, cannot.
It's always been a challenge, but it really is now. And, for instance, I did a webinar the other day, and one of the attendees said, “We’ve had to spin our board five different times to compensate for component issues.” And you know what that is? That’s a bunch of time. It’s a bunch of validation. That’s tough. And at Altium we’re trying to address some of the critical aspects relating to the supply chain. And, the key is just like everything else, plan ahead. It’s better to have it and not need it, than to need it and not have it. And it’s that way with a lot of things.
It’s unfortunate, but even people who get advanced warning of hurricanes sometimes run out of water. And the other thing that I think is happening is that, as designers, we were usually not the ones who traditionally had to worry about sourcing parts. We just designed. Today, you must be aware of the supply chain. And again, to borrow a phrase from Homeland Security relating to another significant activity, “if you see something, say something.” And if you’re at the beginning of a design process and you’re an engineer, you’re a technician, or you’re a board designer, if you see a problem with that bill of materials, you need to tell somebody as early as possible.
So that’s the theme of my AltiumLive presentation. Fortunately, Altium provides a lot of high value capability. One of the keys is to have an early warning system that lets you know you have a component issue. And the nice thing about Altium is supply chain intelligence is intrinsic to the application—It’s built in. You go into the properties panel. You see an indication if that part that you’ve selected has an issue. When you go into your bill of materials, you’ll see any component red flags. If you’re selecting a component from your library and there’s a current stock issue, you’re going to see it.
Shaughnessy: What are some of the lead times you’re seeing now? Is it still 50 weeks for a lot of these parts?
Mazur: Yes. I ordered SPI EEPROM chips in May of 2021, and they made it sound like they would ship them later that same month. Then it moved to July. Then it moved to December. I think it’s out until 2023 now. Fortunately, if you offer 512K of storage in your product, you can always offer 256K and still ship your product, with a derated specification. This was the backup plan, but as it turned out, we were able to find a substitute for the 512K part.
Shaughnessy: What do you hope the attendees take away from your presentation?
Mazur: Well, I hope that they realize that today’s supply chain and the way they design impacts the sourcing of parts, and that in some cases, when their goal is to get a product to market, it’s not necessarily time to come up with the most eloquent design. Eloquent designs are great. Very efficient designs are great, but they’re not great if you can’t manufacture them in volume. As designers, we need to strike a practical balance.
Sometimes you may be better off taking a block of circuitry, implemented with a single-sourced, purchased chip, and consider designing that block as discrete circuitry, because that would give you the ability to substitute out easily. That’s one of the nice things about transistor design, as an example.
So just to summarize, the answer to your question is that I hope I was able to broaden their awareness to realize the impact that design and part choices have on their ability to get their products manufactured. Another aspect is if you’re choosing popular parts, that’s like choosing a popular theme park. It’s not always fun to go to—It’s packed. And so sometimes you’ve got to think outside the box, design with volume in mind and have alternatives. Have several destinations rather than a focus on one.
Shaughnessy: That’s a good way to look at it. Thanks for your time, Vince.
Mazur: Thank you, Andy.
Watch Vince Mazur's presentation Avoiding Supply Chain Issues with Variants & Live BOM Part Choices below.
Suggested Items
Spotlight on PEDC: Filbert Arzola
12/19/2024 | Andy Shaughnessy, Design007 MagazineIPC and FED have teamed up to create a new PCB design conference in Vienna, Austria. The Pan-European Electronics Design Conference (PEDC) takes place Jan. 29-30 at the NH Danube City hotel in Vienna. Raytheon’s Filbert Arzola is presenting “Engineering and Adapting Model-based PCB Design in Step with Sustainability and Digital Twins” at PEDC. I asked Filbert to discuss what attendees can expect from his class.
Avnet Insights: Engineers Outline Opportunity for AI
12/19/2024 | AvnetFor the fourth consecutive year, Avnet, Inc. (Nasdaq: AVT) will release its Avnet Insights survey, which has been keeping a pulse on how engineers are responding to the market since 2021. This year’s survey examines technology’s new frontier: Artificial Intelligence, and the promise – and challenges – it presents for product design.
IPC/WHMA Launches Groundbreaking Online Course on Wire Harness Design
12/18/2024 | IPCIPC/WHMA is excited to announce the launch of its new online instructor-led training course, "Introduction to Wire Harness Design I," available now through the IPC EDGE Learning Management System.
The Companion Guide to 'Designing for Reality' by Matt Stevenson Now Available
12/19/2024 | I-Connect007I-Connect007 is excited to announce the release of "The Companion Guide to...Designing for Reality," written by Matt Stevenson of ASC Sunstone Circuits. This essential resource builds on the foundational insights presented in "The Printed Circuit Designer’s Guide to... Designing for Reality" and delivers advanced strategies for scaling PCB production.
Global PCB Connections: Following DFM Rules Leads to Better Boards
12/18/2024 | Jerome Larez -- Column: Global PCB ConnectionsAs a PCB field applications engineer, ensuring smooth communication between PCB designers and fabricators is one of my frequent challenges. A critical part of that dialogue is design for manufacturing (DFM). Many designers, even experienced ones, often misunderstand or overlook important DFM considerations. They may confuse design rules with manufacturing minimums, leading to technically feasible designs that are difficult or costly to produce. In this column, I will clarify some common DFM guidelines and help designers understand the difference between “design rules” and “minimums” while sharing best practices that will simplify the production process and ensure the highest quality PCB.