The Shaughnessy Report: Showing Some Constraint
Elementary, Mr. Watson: Rein in Your Design Constraints
Target Condition: Are Autorouters Friend or Foe?
Producing Diverse Designs in Concert With Manufacturing
June 16, 2022 | Scott Miller, FreedomCAD ServicesEstimated reading time: 2 minutes
There is a new acronym bubbling up in the design world: DWM, which stands for “design with manufacturing.” Why is this different than design for manufacturing, or DFM? With DWM, the emphasis is on integration between the design team and the manufacturers during the design process. DWM is much more than that.
As an engineering service company, we provide design services to companies that require additional capacity to meet time-to-market objectives or technical expertise that may be beyond the experience or core competency of the company we are supporting.
Whatever the reason, we are tasked with producing designs that meet various technical requirements, yet are cost-effective and manufacturable. We provide this service to hundreds of customers who have varying degrees of processes, tools, and manufacturing partners. Given this diversity, we have recognized the importance of designing with manufacturing to achieve the product development goals of manufacturability and technical excellence.
Our business revolves around printed circuit board design services. We are not an OEM and we don’t develop products; therefore we start with customer-supplied data. The depth of the data varies depending upon the customer and the project, but we are receiving inputs from the customer to start the process. This is when the most important part of the process starts: communication. It’s important to understand the technical and tactical requirements. Besides the typical technical product development questions, there are several questions that we will also flush out early in the process:
- What are the product specifications that must be met?
- Are there geographic or ITAR restrictions?
- What are the projected prototype and production volumes?
- Do you have an approved vendor list (AVL), incumbent board fabricators, and/or contract manufacturers?
- Does the product require RoHS compliance?
- Do you have any single source components or custom components on your bill of materials (BOM)?
- What is your project’s target completion date?
Addressing these questions helps identify all the DWM stakeholders so that we can begin communications to assure that we are in sync. The goal is to validate the decisions early in the design process rather than later, or during fabrication or assembly when problems are much more expensive to resolve. It is important to match the technical requirements with manufacturers whose process capabilities are well aligned with the technical requirements.
Communication: Saving Money, Resources
For instance, receiving guidance from your PCB fabricator on laminate material options, costs, and availability issues is very beneficial. Establishing a board stackup that meets the technical requirements and is manufacturable is a prerequisite for successful high-performance or high-volume designs.
Identifying coupon requirements, testing, panelization, thieving, and assembly rail requirements helps to streamline the PCB fabrication process and promote efficient assembly of the printed circuit board. Designing with blind and buried vias can increase the fab processing time but it may enable a PCB to be designed in fewer layers, which can more than offset the increased processing time. This could be very significant for high-volume products. Addressing these requirements upfront enables the design to move smoothly through the fab and assembly processes.
To read this entire article, which appeared in the June 2022 issue of Design007 Magazine, click here.
Share on:
Suggested Items
Digital Twin Concept in Copper Electroplating Process Performance
07/11/2025 | Aga Franczak, Robrecht Belis, Elsyca N.V.PCB manufacturing involves transforming a design into a physical board while meeting specific requirements. Understanding these design specifications is crucial, as they directly impact the PCB's fabrication process, performance, and yield rate. One key design specification is copper thieving—the addition of “dummy” pads across the surface that are plated along with the features designed on the outer layers. The purpose of the process is to provide a uniform distribution of copper across the outer layers to make the plating current density and plating in the holes more uniform.
Meet the Author Podcast: Martyn Gaudion Unpacks the Secrets of High-Speed PCB Design
07/10/2025 | I-Connect007In this special Meet the Author episode of the On the Line with… podcast, Nolan Johnson sits down with Martyn Gaudion, signal integrity expert, managing director of Polar Instruments, and three-time author in I-Connect007’s popular The Printed Circuit Designer’s Guide to... series.
Showing Some Constraint: Design007 Magazine July 2025
07/10/2025 | I-Connect007 Editorial TeamA robust design constraint strategy balances dozens of electrical and manufacturing trade-offs. This month, we focus on design constraints—the requirements, challenges, and best practices for setting up the right constraint strategy.
The Shaughnessy Report: Showing Some Constraint
07/14/2025 | Andy Shaughnessy -- Column: The Shaughnessy ReportWhen we first decided to cover strategies for setting PCB design constraints, one designer we spoke with said, “They’re not really constraints; they’re more like guardrails that prevent your design from going off a cliff.”
Elementary, Mr. Watson: Rein in Your Design Constraints
07/10/2025 | John Watson -- Column: Elementary, Mr. WatsonI remember the long hours spent at the light table, carefully laying down black tape to shape each trace, cutting and aligning pads with surgical precision on sheets of Mylar. I often went home with nicks on my fingers from the X-Acto knives and bits of tape all over me. It was as much an art form as it was an engineering task—tactile and methodical, requiring the patience of a sculptor. A lot has changed in PCB design over the years.