-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueSilicon to Systems: From Soup to Nuts
This month, we asked our expert contributors to weigh in on silicon to systems—what it means to PCB designers and design engineers, EDA companies, and the rest of the PCB supply chain... from soup to nuts.
Cost Drivers
In this month’s issue of Design007 Magazine, our expert contributors explain the impact of cost drivers on PCB designs and the need to consider a design budget. They discuss the myriad design cycle cost adders—hidden and not so hidden—and ways to add value.
Mechatronics
Our expert contributors discuss the advent of mechatronics in PCB design, the challenges and opportunities this creates for circuit board designers, and the benefits—to the employee and the company—of becoming a mechatronics engineer.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
The Practical Side of Using EM Solvers
August 1, 2022 | Heidi Barnes, Keysight TechnologiesEstimated reading time: 2 minutes
![](https://iconnect007.com/application/files/3916/3123/0188/Heidi_Barnes.jpg)
Electromagnetic (EM) solvers based on Maxwell’s equations have proven invaluable in the advancement of digital electronics and wireline communications. Plain and simple, electrical engineers need to know what a circuit or electrical interconnect will do when excited by a dynamic or varying signal. In the signal integrity world, an interconnect that passes a DC connectivity check can completely fail at higher frequencies. In the power integrity world, a power rail that measures the correct DC voltage could easily go into oscillation when a dynamic load is applied. Learning the basic skills to fire up an EM simulator, obtain qualitative answers in minutes, and higher fidelity answers in a few days, can be the difference between sleepless nights of product failures vs. robust designs with wide design margins.
In the beginning and even today, EM simulators are constantly in search of the right balance between accuracy and speed to “mesh” a three-dimensional structure and acquire the right answer. In the search for the ultimate solution to Maxwell’s equations, whether it is in the frequency domain for finite element methods (FEM) or in the time domain for finite difference time domain (FDTD), the user interface often suffers. Setting up ports, boundary conditions, and mesh topology might give the guru user additional flexibility. For most of us, we need automation to reduce the repetitive tasks.
Figure 1: 3D EM simulators like PathWave ADS SIPro and PIPro make it easy to select nets and auto assign ports for fast EM setup and simulation. EM current density results on the right for a DDR4 DIMM board show how the power delivery at 10 kHz comes from the J1 edge connector, but at the higher 10 MHz frequency the power is being delivered by the on-board capacitors.
The good news is the processing speed of modern computers and low-cost memory has made it much easier to maintain significant accuracy while increasing speeds. This has enabled increased investment in optimizing user interfaces for specific applications, like simulating multi-layer laminate PCB designs. The improved user interfaces like Keysight’s PathWave ADS SIPro and PIPro rely on robust importing of EDA PCB CAD data, which include stackup, nets, and components for easy selection of nets and components for simulation. Ports can be automatically assigned, and default meshing and boundary conditions enable users to be up and running with an EM simulation in a matter of minutes.
However, simulators are notorious for “garbage in equals garbage out.” Here are a few tricks of the trade to ensure a proper setup.
To read this entire article, which appeared in the July 2022 issue of Design007 Magazine, click here.
Suggested Items
Trouble in Your Tank: Materials for PWB Fabrication—Drillability and Metallization
07/16/2024 | Michael Carano -- Column: Trouble in Your TankLaminate materials are the building blocks on which printed circuit boards are manufactured. Circuit board designers rely on the critical electrical properties of the materials to design the interconnects, and with the drive toward IoT (internet of things), autonomous driving, and virtual and augmented reality, material properties take on a very high level of importance.
Don’t Overconstrain Your Board Materials
07/02/2024 | I-Connect007 Editorial TeamWhen we started planning May’s issue, which centers on the use of traditional laminates in certain high-frequency PCBs, we knew we had to interview Kris Moyer and Ed Kelley together. Kris teaches advanced PCB design classes for IPC, and Ed is the former CTO of Isola and founder of Four Peaks Innovation. What ensued was a wide-ranging discussion on the evolution of “standard” PCB laminates and the recent trend by some OEMs to use these materials in high-frequency and even RF boards.
Underconstraining Your Materials? Leave It to the Experts
05/30/2024 | I-Connect007 Editorial TeamWith traditional laminates now sporting improved resin systems, some OEMs are choosing various flavors of FR-4 instead of high-speed laminates for their high-speed designs—even RF applications. Avoiding overconstraining your materials in high-speed products can lead to considerable cost savings, not to mention a more streamlined trip through fabrication.
The Shaughnessy Report: Unlock Your High-speed Material Constraints
05/15/2024 | Andy Shaughnessy -- Column: The Shaughnessy ReportThe world of PCB materials used to be a fairly simple one. It was divided into two groups: the “traditional” laminates, often called FR-4, and the high-speed laminates developed especially for high-speed PCBs. These were two worlds that usually didn’t collide. But then traditional laminates started getting better, and high-speed designers and design engineers took notice and started to reconsider what FR-4 could be used for.
Breaking High-speed Material Constraints: Design007 Magazine — May 2024
05/14/2024 | I-Connect007 Editorial TeamDo you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems instead of high-speed materials, saving time and money while streamlining the fab process. In the May 2024 issue of Design007 Magazine, our contributors explain how to avoid overconstraining your materials when working with high-speed boards.