-
-
News
News Highlights
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssuePower Integrity
Current power demands are increasing, especially with AI, 5G, and EV chips. This month, our experts share “watt’s up” with power integrity, from planning and layout through measurement and manufacturing.
Signal Integrity
If you don’t have signal integrity problems now, you will eventually. This month, our expert contributors share a variety of SI techniques that can help designers avoid ground bounce, crosstalk, parasitic issues, and much more.
Proper Floor Planning
Floor planning decisions can make or break performance, manufacturability, and timelines. This month’s contributors weigh in with their best practices for proper floor planning and specific strategies to get it right.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
Tim Haag Celebrates 10 Years as a Columnist
December 19, 2022 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 5 minutes

I ran into columnist Tim Haag at PCB West, who was visiting the show with co-workers from the technical writing company First Page Sage. We discussed Tim’s years as a Design007 Magazine columnist, and some of the drivers affecting the technical writing market, such as the retirement of many PCB subject matter experts who were also go-to writers within their companies.
Andy Shaughnessy: Tim, good to see you. It’s been a while. How’s it going?
Tim Haag: It’s going really good, Andy. Good to see you.
Shaughnessy: Yeah, good to see you. So first, tell us what brings you to PCB West?
Haag: I have two writers here from First Page Sage who will be taking classes. I’m here to connect with people, make new connections, and just basically network with the whole design community that I’ve known for the last 30 years or so.
Shaughnessy: Now you’re in a management position with a number of writers working for you. Not bad, considering that you were a PCB designer, and not a writer. How did you wind up in management?
Haag: I started out by writing different things for the company that I was working for at the time, and that’s where I began to grow as a writer. Eventually I had some ideas that I put down, and Design007 Magazine started publishing my column. That led to more writing, and eventually, First Page Sage was looking for somebody who could write technology pieces about the PCB design industry, and they hired me. As that has grown and the company has grown, I’ve had more supervisory experience. Now I’m a team lead of a group of writers who cover just a vast assortment of different industries.
Shaughnessy: It looks like First Page Sage services much of the electronics industry, not just PCB.
Haag: Exactly. We have a lot of different customers that are in the EDA industry and other technology segments. EDA is just one area that we service. We also have people writing about other industries medical, legal, real estate, and SaaS-based applications. The list is endless.
Shaughnessy: I can’t believe you’ve been writing your column for 10 years. Congratulations!
Haag: I’ve enjoyed it. It’s really been great working with you all.
Shaughnessy: When you sent your first column to us, we published it as-is. I don’t think we changed a single word.
Haag: I was never so shocked as when you came back to me and said, “We’re going to publish this word for word and not change a thing.” I was stunned.
Shaughnessy: But with the next column, you weren’t so lucky. We bled all over it.
Haag: Oh, yeah. Just red on every word.
Shaughnessy: That’s how it is when your first column is a home run. You can’t hit homers all the time.
Haag: I had such an ego crash.
Shaughnessy: Now you’re the team lead. You said that your company is hiring writers right now, and that seems to be the case across the board. I’ve heard other technical writers saying that there’s just so much work writing out there now. Is it because so many subject matter experts left the industry during COVID, or are they all just retiring? What do you attribute this to?
Haag: We do see a lot of that. A lot of people come to us because they don’t have the in-house expertise to write the material that they want. But we provide more than just technical expertise. We’re laying out an entire campaign for companies to grow their presence on the web and to attract visibility. We do that by not only organizing the SEO aspects of their campaign, but also by studying their industry in depth, and then we provide writers who are subject matter experts and can write high-quality content to attract that interest from the people they’re trying to attract.
We do the basics of SEO, sure, like everybody else does. But with us that’s the beginning of the journey, not the destination. We will look at what the company needs, what it’s going to take to get there, and then design an entire campaign that will answer those needs. We also provide technical expertise on website design in addition to the content that our writers are providing.
Shaughnessy: What is the main problem customers have when they come to you?
Haag: We see a variety of needs from customers. Some people just want technical expertise in what we write for them. Other people say, “Our website’s a mess, and we know it. What do you guys recommend?” Other people say, “We want to see a campaign that will grow our readers’ interest.” What we provide the customer depends on what they want. We may publish blogs to their website, or publish it to social media outlets like LinkedIn, or whatever is necessary.
Shaughnessy: That’s great. This all happened almost accidentally, right? It’s like designers say about their career, “I didn’t choose this; it chose me.” This happened fairly late in your career.
Haag: It was late in my career, and my career in design started out by accident as well. I was working for an electronics company on the manufacturing floor; I had been a photographer in school, and this job opened up in the photo lab, so I took a look. I had no idea what it all meant. They transferred me over and next thing I know I’m making film that’s used for layers of circuit boards.
Shaughnessy: You were in the yellow room?
Haag: Exactly. I went from there to laying out boards, and from there I eventually became a technical writer for circuit board design.
Shaughnessy: I can’t believe it’s been 10 years since you started the column.
Haag: Yes, it’s been 10 years. It’s been wonderful, too.
Shaughnessy: Thanks for your time, Tim.
Haag: Thank you, Andy. Always a pleasure.
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
SEMICON West: The Path to a $1 Trillion Future
10/14/2025 | Marcy LaRont, I-Connect007After more than 50 years in San Francisco, SEMICON West moved its 2025 show to Phoenix, which is significant because it highlights the importance of Arizona as a semiconductor and tech hub. Though the show will be back in San Francisco in 2026, the overwhelmingly warm welcome SEMI received from Arizona Governor Katie Hobbs, Phoenix Mayor Kate Gallego, and ASU President Michael Crowe—who has been responsible for ASU repeatedly achieving the U.S. News and World Reports most innovative university ranking—was remarked upon repeatedly. All indications are that SEMICON West may well be back in Phoenix after that 2026 season.
Technica USA Named Exclusive U.S. Distributor for DCT Cleaning Products
10/14/2025 | Technica USATechnica USA is pleased to announce a strategic partnership with DCT USA, LLC, becoming the exclusive master distributor of DCT cleaning products in the United States, effective November 1, 2025.
Is Glass Finally Coming of Age?
10/13/2025 | Nolan Johnson, I-Connect007Substrates, by definition, form the base of all electronic devices. Whether discussing silicon wafers for semiconductors, glass-and-epoxy materials in printed circuits, or the base of choice for interposers, all these materials function as substrates. While other substrates have come and gone, silicon and FR-4 have remained the de facto standards for the industry.
Amplifying Innovation: New Podcast Series Spotlights Electronics Industry Leaders
10/08/2025 | I-Connect007In the debut episode, “Building Reliability: KOKI’s Approach to Solder Joint Challenges,” host Marcy LaRont speaks with Shantanu Joshi, Head of Customer Solutions and Operational Excellence at KOKI Solder America. They explore how advanced materials, such as crack-free fluxes and zero-flux-residue solder pastes, are addressing issues like voiding, heat dissipation, and solder joint reliability in demanding applications, where failure can result in costly repairs or even catastrophic loss.
The Training Connection, LLC Welcomes Industry Veteran Jack Harris to Lead Training Partnerships
10/07/2025 | The Training Connection LLCThe Training Connection, LLC (TTC-LLC), a premier provider of test engineering and development training, is proud to announce that Jack Harris, one of the most recognized names in electronics manufacturing training and technical development, has joined the company as Relationship Lead, Training.