-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueMechatronics
Our expert contributors discuss the advent of mechatronics in PCB design, the challenges and opportunities this creates for circuit board designers, and the benefits—to the employee and the company—of becoming a mechatronics engineer.
Creating a Culture of Collaboration
PCB designers could learn quite a bit from NASA and the private companies that develop spacecraft: Every one of these vehicles is a testament to the value of collaboration among disparate stakeholders. Without a collaborative culture, the rocket might never get off the ground.
Breaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
A Challenge Facing Aerospace Designers In 2023
January 24, 2023 | Lee Ritchey, Speeding EdgeEstimated reading time: Less than a minute
![](https://iconnect007.com/application/files/7516/9086/8713/Lee_Ritchey.jpg)
As the aerospace industry has been tasked with fitting increasingly complex electronics in existing airframes the demands on PCB substrates have begun to overtask the existing state of the art in PCB fabrication.
Recently, I was called in to troubleshoot some reliability problems with a very dense PCB that had components on both sides and required the use of stacked blind vias and buried vias. The usual name for this kind of design is “build-up fabrication,” requiring many trips through the lamination, drilling, and plating operations at a fabricator.
The designers decided to reach down from the outer layer to the third layer below the surface using stacked blind vias.
The process used to create the structure in Figure 1 is to fabricate a PCB using the ordinary lamination, drilling, and plating processes employed for any multilayer PCB. Once this is done, a laser drill is used to create the first blind via at the bottom of the stack as shown in Figure 1.
To read this entire article, which appeared in the January 2023 issue of Design007 Magazine, click here.
Suggested Items
Altair Signs MoU With University of Nottingham to Develop Aerospace Digital Twin Project
07/25/2024 | PRNewswireAltair, a global leader in computational intelligence, has signed a memorandum of understanding (MoU) with the U.K.-based University of Nottingham for a digital twin project within the aerospace sector.
Collins Aerospace Relocating Singapore Plant to New $250M Manufacturing Facility in Seletar Aerospace Park, Singapore
07/25/2024 | Collins AerospaceCollins Aerospace, an RTX business, announced the relocation of its Singapore manufacturing facility to a new, state-of-the-art site in Seletar Aerospace Park, Singapore.
Innovative and Cost-effective BGA Re-balling
07/23/2024 | Shavi Spinzi, Nano Dimension/EssemtecA new, high-quality BGA re-balling process, which is integrated into an all-in-one solution of dispensing and placement equipment developed by Essemtec, brings new opportunities for the reapplication of expensive BGA components. This new method seamlessly integrates the sequence of flux deposition and ball (sphere) placement with the subsequent soldering process.
Vertical Aerospace Begins Testing on New VX4 Prototype
07/22/2024 | BUSINESS WIREVertical Aerospace, a global aerospace and technology company that is pioneering zero emissions aviation, announced that testing on its most advanced eVTOL aircraft, unveiled last week, has started with initial powered ground tests, including propeller balancing, successfully complete.
Aerospace Riveting Equipment Market to Surpass $160M Revenue till 2032
07/22/2024 | Global Market InsightsThe aerospace riveting equipment market will witness over 3.5% CAGR between 2024 and 2032, propelled by burgeoning partnerships among companies for distribution and expansion.