-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueSilicon to Systems: From Soup to Nuts
This month, we asked our expert contributors to weigh in on silicon to systems—what it means to PCB designers and design engineers, EDA companies, and the rest of the PCB supply chain... from soup to nuts.
Cost Drivers
In this month’s issue of Design007 Magazine, our expert contributors explain the impact of cost drivers on PCB designs and the need to consider a design budget. They discuss the myriad design cycle cost adders—hidden and not so hidden—and ways to add value.
Mechatronics
Our expert contributors discuss the advent of mechatronics in PCB design, the challenges and opportunities this creates for circuit board designers, and the benefits—to the employee and the company—of becoming a mechatronics engineer.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Estimated reading time: 2 minutes
![](https://iconnect007.com/application/files/5817/0542/2681/Istvan_Novak_300.jpg)
Vertical Resonances in Ceramic Capacitors
Ceramic capacitors are very popular in power distribution networks (PDN). They are small, cheap and come in a very wide range of available values. Typical ceramic capacitors also have low losses, at least compared to similar-valued electrolytic or tantalum capacitors. Because of their small size, we might think that structural resonances inside the ceramic capacitors do not exist in the frequency range where we usually care for the PDN. The unexpected fact is that the better PDN we try to make, the higher the chances that structural resonances inside ceramic capacitors do show up. This column tells you why and how.
Figure 1 shows measured data on a small 0508 reverse-geometry 10 uF capacitor. There are several interesting aspects of these plots that are explained in the paper found in. Here, we focus only on one strange-looking detail: the double-hump resonance we see on the impedance magnitude and impedance real part curves somewhere in the 3 to 10 MHz frequency range. The test setup made sure that as much as possible the measurement result represented only the capacitor: The little fixture used for the measurement was separately characterized and showed no resonance in that frequency range.
The biggest linear dimension of this capacitor is 80 mils, or 2 mm. The wavelength of 10MHz in free space is 30 meters; this is so much bigger than the linear dimensions of the capacitor that any resonance at such low frequency is really surprising, even if we factor in the high dielectric constant of the ceramic material. To understand what happens, we have to create a detailed electrical model of the capacitor, for instance a two-dimensional bedspring matrix, shown in Figure 2.
Ceramic capacitors we use for power distribution bypassing have multiple metal plates interdigitated and embedded in a high dielectric constant ceramic material. As shown in Figure 3, the capacitor plates connect alternating to vertical metalized terminals at the two ends of the capacitor body. High-density ceramic capacitors can have hundreds of these capacitors plates. Between adjacent capacitor plates, which are connected to the opposite terminals, there are thin ceramic layers.
Many of these sections are connected in parallel by the vertical terminals, conveniently increasing the total capacitance and reducing the inductance as well as the series resistance of the part. Without cross sectioning we don’t know how many conductive plates a particular capacitor actually has, but to model the resonances we see in the measured data, it is really irrelevant.
Read the full column here.
Editor's Note: This column originally appeared in the November 2014 issue of The PCB Design Magazine.
More Columns from Quiet Power
Quiet Power: An Evolution in PCB Design CostsQuiet Power: The Effect on SI and PI Board Performance
Quiet Power: 3D Effects in Power Distribution Networks
Quiet Power: Noise Mitigation in Power Planes
Quiet Power: Uncompensated DC Drop in Power Distribution Networks
Quiet Power: Ask the Experts—PDN Filters
Quiet Power: Friends and Enemies in Power Distribution
Quiet Power: Be Aware of Default Values in Circuit Simulators