-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
A Handy Compilation of Our Top 10 DFM Articles
January 27, 2017 | Andy Shaughnessy, PCBDesign007Estimated reading time: 2 minutes
When we started working on this issue, I searched through our files and found that we’ve published some great DFM articles over the past year or so. While topics like signal integrity tend to get most of the limelight, in the end it all comes down to solid DFM practices. So, without further ado, we present this compilation of our Top 10 DFM articles and columns, culled from the pages of The PCB Design Magazine and The PCB Magazine. Enjoy.
The Top 10 Ways Designers Can Increase Profits
So, can you truly increase profitability through PCB design practices? Yes, you can. And it starts with a philosophy that embraces DFM techniques. Then you must be ready for the initial release to a fabricator by ensuring that you are communicating all of your specifications and needs clearly to the fabrication house so that you get an accurate quote. By Mark Thompson.
Beyond Design: The Need for Speed—Strategies for Design Efficiency
Years of experience with one EDA tool obviously develops efficiency, whether the tool be high-end feature-packed or basic entry-level. However, there comes a time, with the fast development pace of technology, that one should really consider a change for the better to incorporate the latest methodologies. This month, I will look at productivity issues that impede the PCB design process. By Barry Olney.
Brooks' Bits: How Many Vias Does It Take To…?
Sounds like the opening words of a bad joke. Well, here’s the answer, and it’s no joke: One! That’s right. No matter how much current you are putting down the trace, all you need is a single via. And a small one, at that. OK, that last statement might not be true in every single case. But it is true in a LOT more cases than you think. I will explain why in this column. By Douglas G. Brooks.
Mark Thompson: It’s All about Communication
During DesignCon, we talked with columnist Mark Thompson about why communication is paramount when designing and prototyping boards. Thompson also explained how designers can avoid making common mistakes that can set back an entire project. By Barry Matties and Andy Shaughnessy.
Trouble in Your Tank: Building Reliability into the PCB, Part 2
Many engineers have been in this situation: Process audits are completed. Personnel who have direct influence are properly trained. Analytical controls are in place. Great! Yet there are boards that are not meeting specification (IPC 6010 Series, IPC 600, IPC 610). And now the team has to deal with the rejects and provide corrective actions. By Michael Carano.
To read this entire article, which appeared in the January 2017 issue of The PCB Design Magazine, click here.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Ventec Discusses New Pro-bond Family of Advanced Products
05/01/2024 | Real Time with...IPC APEX EXPOChris Hanson, Ventec's Global Head of IMS Technology, outlines the launch of four pro-bond formulas that deliver an outstanding combination of low dissipation factor (Df) with a dielectric constant (Dk) range to maximize the design window for critical PCB parameters. As Chris points out, Pro-bond is designed for low-loss, high-speed applications, while thermal-bond dissipates heat from a component through the board to a heat sink.
IPC's Vision for Empowering PCB Design Engineers
04/30/2024 | Robert Erickson, IPCAs architects of innovation, printed circuit board designers are tasked with translating increasingly complex concepts into tangible designs that power our modern world. IPC provides the necessary community, standards framework, and education to prepare these pioneers as they explore the boundaries of what’s possible, equipping engineers with the knowledge, skills, and resources required to thrive in an increasingly dynamic field.
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.